Hampton Bay 65-516183 Operating instructions

USE AND CARE GUIDE

Model #

Item #

LAGUNA POINT 4PC SET W/ CUSHIONS

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and conf

idence you have placed in Hampton Bay through the purchase of this table. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your

home improvement needs. Thank you for choosing Hampton Bay!

855-HD-HAMPTON -1

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Serv

ice

8 a.m. - 6 p.m., EST, Mon day

Table of Contents

Table of Contents............................................................2

Safety Information...........................................................2

Set Up Your Furniture Properly...................................2

Examine Your Furniture...............................................2

Observe Weight Limits.................................................2

Warranty.. .........................................................................2

What is Covered...........................................................2

What is Not Covered....................................................2

Pre-Assembly....................................................................3

Planning Assembly........................................................3

Hardware Included........................................................3

Package Contents................................................

....4,5,6

Assembly. .................................................................

Care and Cleaning...........................................................10

Safety Information

....7,8,9

2

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

SET UP YOUR FURNITURE PROPERLY

□ Ensure that all parts are assembled properly and fully tightened as per the instructions.

□ When placing in the desired location, ensure that all legs are resting on the

same surface.

EXAMINE YOUR FURNITURE

□ Examine occasionally to ensure that there are no

loose parts. If loose parts are found, they must be re-tightened fully

before additional use.

OBSERVE WEIGHT LIMITS

The weight limits for the following products are listed

below:

CAUTION:

your furniture, injuries

can occur.

Warranty

TWO YEAR FRAME, AND FABRIC LIMITED

WARRANTY

WEAVE

□ Chair: 300 lbs

□ Swivel Chair: 300 lbs

□ Loveseat: 500 lbs

□ Ottoman: 150 lbs

□ Table : 50 lbs

□ Sofa: 700 lbs

□ Rocking Chair: 300 lbs

□ Chaise Lounge: 300 lbs

□ Dining Table: 100 lbs

WHAT IS NOT COVERED

Contact the Customer Service Team at 855-HD-HAMPTON or visit

www

.

Hamptonbay

.

com

.

1-

We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for two years. For glass table

top we warrant 30 days from the date of purchase.

This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts

are not covered under this warranty.

We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.

□ Dining Chair: 200 lbs

If you overload

WHAT IS COVERED

3

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

Pre-Assembly

PLANNING ASSEMBLY

To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning

assembly.

HARDWARE INCLUDED

Part Description Quantity

DD

21

EE

GG

2

GG

DD

AA

CC

BB

AA

Φ1/4 x 55 mm

BB

Washer

Φ6 mm

CC

18

Long Bolt

2

Φ1/4 x 20 mm

Bolt

Locking nut Φ6 mm

EE

Part Description Quantity

DD

16

EE

GG

2

Wrench

#13

1

FF

AA

BB

GG

AA

Φ1/4 x 55 mm

14

BB

Washer

Φ6 mm

CC

2

Long Bolt

Hex wrench

4mm

2

Φ1/4 x 20 mm

Bolt

Locking nut Φ6 mm

FF

1

Plastic washer Φ6 mm

43

1

FF

Φ1/4 x 40 mm

Bolt

Hex wrench

4mm

HH

Wrench

#11

1

Plastic washer Φ6 mm

FF

4

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

Pre-Assembly (continued)

PACKAGE CONTENTS(CHAIR)

A Seat 1

B Back 1

C Left Arm 1

F

Right Arm 1

D

Back Cushion 1E

Seat Cushion 1

C

A

D

B

E

F

Part

Description

Quantity

5

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

Pre-Assembly (continued)

PACKAGE CONTENTS(SOFA)

H

J

I

G

K

L

G Seat

1

H Back

1

C

Left Arm

1

F

Right Arm

1

D

Back Cushion

1

E

Seat Cushion

1

H

D

C

G

E

F

Part

Description

Quantity

6

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

I

J

K

L

M

N

Assembly

1

Attaching to side skirts to the

2

Attaching the front skirt

3

Attaching the table woven top

4

□

Completing the assembly

□

Place the back skirt (P) on a soft surface.

Attach the right side skirt (N) and the left side skirt (M)

to the back skirt (F) by aligning holes on the side

skirt (M)and (N) with the holes on the back skirt (P).

And inserting bolts (CC) with washers (DD). Tighten

half way using the Hex wrench (HH). Do not tighten

completely.

bolts (CC) with washers (DD).D

Put the front(O) onto the assembling table.

Tighten with o not fully

tighten .

Put the top (K) on a soft surface.

Use bolts (AA) to attach (N)and (M) to the top (K).

Fasting halfway using allen wrench (HH)

5

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

X2

_CC

AA

BB

_DD

X2

N

P

Fig1

CC

DD

X2

_CC

_DD

X2

P

N

M

O

P

C

D

CC

DD

X4

_CC

_DD

X4

back skirt

M

N

F

E

K

X4

_CC

_DD

X4

XFF

_CC

Check and make adjustments as needed.

Fully tighten all the bolts (CC) with the Hex wrench

(HH) and cover with the bolt caps (DD).

Place the glass top(L) on the woven top (K) This table

is now ready for your enjoyment.

□

PACKAGE CONTENTS(COFFEE TABLE)

1

Table top

I

1Base J

2

1

L

1

M

triks kcaB

K

Side skirts

Front skirt

Part

Description

Quantity

K

I

M

J

K

L

Chair Assembly

1

Attaching the right arm

2

Attaching the back

3

Attaching the left arm

4

Completing the assembly

Place the right arm (D) on a soft surface.

Attach the seat (A) to the right arm (D) by aligning

holes on the seat (A) with the holes on the right arm

(D) and inserting bolts (BB) with washers (EE).

Tighten half way using the Hex wrench (GG).

Tighten half way

using the Hex wrench (GG).

Put the back ( B ) metal side into the hole of arm (D).

Attach right arm (D) to the back (B),fasten bolts (BB) and

washer (EE).

Insert two pins on the back (B)into the holes on arm (D) ,

fasten bolts (AA) and washer (EE).

Repeat steps1 and 2 to attach the left arm (C)

Check and make adjustment as needed.

Fully tighten all the bolts with the Hex wrench(GG) .

Place the seat cushion (F) and the back cushion(E)

on the chair.

This chair is now ready for your enjoyment.

7

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

EE

A

D

C

B

□

A

D

B

AA

BB

EE

BB

EE

BB

EE

CC

BB

EE

BB

EE

□

E

F

A

D

Sofa Assembly

3

Attaching the left arm

4

Adding the caps

Repeat steps1 and 2 to attach the left arm (C)

Check and make adjustment as needed.

Fully tighten all the bolts with the wrench(GG) and

cover with the bolt caps (EE).

Place the seat cushion (F) and the back cushion(E)

on the chair.

This chair is now ready for your enjoyment.

AA

X2

BB

X2

AA

X4

BB

X4

AA

X3

BB

X3

EE

□

G

D

H

G

D

C

G

D

H

AA

BB

AA

BB

AA

BB

AA

BB

CC

X9

1

Attaching the right arm

2

Attaching the back

3

Attaching the left arm

4

Completing the assembly

Tighten half way using the Hex wrench (GG).

Tighten half way

using the Hex wrench (GG).

Put the back ( H ) metal side into the hole of arm (D).

Attach right arm (D) to the back (H),fasten bolts (BB) and

washer (EE).

Insert three pins on the back (B)into the holes on arm (D) ,

fasten bolts (AA) and washer (EE).

Repeat steps1 and 2 to attach the left arm (C)

Check and make adjustment as needed.

Fully tighten all the bolts with the Hex wrench(GG) .

Place the seat cushion (F) and the back cushion(E)

on the chair.

This chair is now ready for your enjoyment.

EE

D

C

□

A

D

B

AA

BB

EE

BB

EE

BB

EE

BB

EE

BB

EE

□

E

F

8

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

Place the right arm (D) on a soft surface.

Attach the seat (G) to the right arm (D) ,fasten with

bolts (BB) with washers (EE). Tighten half way using

the Hex wrench (GG).

1

Attaching to side skirts to the

2

Attaching the front skirt

3

Attaching the table woven top

4

Completing the assembly

□

Place the back skirt (N) on a soft surface.

Attach the right side skirt (L)to the back skirt (N),

Tighten half way using

the Hex wrench (DD).

fasten

with bolts ( BB) and washer (CC).

Repeat previous step for the left side skirt (K) .

Put the top (I) on a soft surface.

Use bolts (BB) and washer (CC) to attach (K) and (L)

to the top (I).Fasting halfway using Hex wrench (DD).

9

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

X2

_BB

BB

CC

_CC

X2

L

N

Fig1

BB

CC

X2

_BB

_CC

X2

N

L

K

M

N

K

L

BB

CC

X4

_BB

_CC

X4

back skirt

K

L

N

M

I

X4

_BB

_CC

X4

Coffee table Assembly

□

Check and make adjustments as needed.

Fully tighten all the bolts (BB) with the Hex wrench(CC) .

Place the glass top(J) on the woven top (I) This table

is now ready for your enjoyment.

□

bolts (BB) with washers (CC).D

Put the assembling table onto the .

Tighten with o not

fully tighten .

front (M)

AA

EE

1

Attaching to side skirts to the

2

Attaching the base

3

Attaching the front side

4

□

Fastening the bolts

□

Attach the right side skirt (K)to the back skirt (M),

Tighten half way using

the Hex wrench (GG).

Place the back skirt (M) on a soft surface.

fasten

with bolts ( AA) and washer (EE).

Repeat previous step for the other side skirt .

AA

EE

J

M

Fig1

Fig2

AA

EE

M

K

back skirt

□

Put the base (J) on side skirt (K) as shown ,fasten with

bolts (AA) with washers (EE).Tighten half way using the

Hex wrench (GG).

K

M

L

K

L

I

N

Fully tighten

all the bolts (AA) with

Turn the assembling storage box upward as shown.

Check and make adjustment as needed.

Hex wrench (GG).

bolts (AA) with washers (EE).D

Put the assembling table onto the .

Tighten with o not

fully tighten .

front (L)

M

K

J

AA

E

K

L

M

Completing the assembly

6

□

his table is now ready for your enjoyment.

Attach side skirt (K) by aligning hole on the top (I) with

the hole on the piston.

Insert a bolt (AA) with washer (EE) and (FF) , fully

tighten with Hex wrench (GG).

Repeat below step for the other side skirt (K).

T

10

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

□

K

I

M

L

Coffee table Assembly

I

5

□

Attaching the top

□

EE

CC

EE

DD

L

Make the holes on (L) and top (I )in a line.

Put long bolts(CC) going through the holes and

tighten with locking nuts (DD) by using wrench (HH)

and Hex wrench(GG), fully tighten.

EE

CC

EE

DD

AA

EE

FF

Care and Cleaning

□

□ If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water.

Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions may shrink.

□

Do not use bleach or solvents on fabrics. When cleaning the table top make sure to use a soft, clean cloth that

a cool, dry place.

does not bleed color as well.

Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. When not in use, store furniture in

11

Please contact 855-HD-HAMPTON for f

HAMPTONBAY.COM

urther assistance.

1-

Questions, problems, missing parts? Before returning to the

store,

call Home Depot Customer Service

8 a.m. - 6 p.m., EST, Mon day-Friday

Retain this manual for future use.

HAMPTONBAY.COM

855-HD-HAMPTON

-1

Hampton Bay 65-516183 Operating instructions

Hampton Bay 65-516183 Operating instructions

Related papers

Other documents