Martha Stewart Living 65-809556/1 Installation guide

HOME OFFICE: 53-06 GRAND AVENUE, MASPETH, NY 11378

TEL: (718)386-6400 FAX: (718) 417-0910

CUSTOMER SERVICE HOT LINE: 1-800-327-2978

SERVICE HOURS: TUESDAY-FRIDAY 9:30AM-4:30PM (EST)

KD CHAIRKD CHAIR

PART LISTPART LIST

A. THE SEAT OF CHAIR

B. THE BACK OF CHAIR

C. ARM

HARDWAREHARDWARE

D. LOCKING NUT

E. WASHER

F. BOLT

G. WRENCH

H. ALLEN WRENCH

I. CAP FOR NUT

J. CAP FOR BOLT

K. SMALL WASHER

FAR EAST MANUFACTURING CO.,LTD.

BASKET CO. INC.

1. TO PREVENT ANY DAMAGE, PLEASE PUT ALL PARTS ON A SOFT

SURFACE DURING ASSEMBLY.

2. REMOVE PLASTIC PROTECTIVE CAPS.

3. EVERY BOLT OR NUT NEEDS TO BE WITH A WASHER “K” OR “E”.

1. PLACE ARM “C” ON THE FLOOR AS SHOWN.

2. PLACE THE SEAT “A” OVER THE 2 BOLTS ON THE ARM “C”.

3. FASTEN IT USING LOCKING NUTS “D” AND HAND TIGHTEN.

1. PUT BACK OF CHAIR “B” ONTO THE 2 BOLTS ON SEAT “A”

AND 1 BOLT ON ARM “C”. FASTEN USING LOCKING NUTS.

MAKE SURE TO INSERT THE PIN ON THE BACK OF THE

CHAIR “B” INTO THE HOLE ON ARM “C” FASTEN WITH BOLT

“F”.

1. REPEAT STEP FOR THE OTHER ARM AND MAKE SURE

LINE UP THE EXTENSION ON THE BACK OF CHAIR “B” TO

HOLE ON ARM “C”.

1. CHECK AND MAKE ADJUSTMENT IF NEEDED. THEN FULLY

TIGHTEN ALL THE NUTS WITH WRENCH “G” AND BOLTS

WITH ALLEN WRENCH “H”.

2. COVER NUTS WITH CAPS “I” AND BOLT WITH CAPS “J”.