Mircom LT-1192-DOX-1024DS-Door Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-1192-DOX-1024DS-Door Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Hinges are placed over
the hinge posts of the
UB-1024DS backbox.
GROUND STUD -
CONNECT ONE GROUND
WIRE FROM UB-1024DS
BACKBOX TO THIS STUD
ON INNER CHASSIS.
FASTEN USING #8 HEX
NUT PROVIDED.
GROUND STUD -
CONNECT ONE GROUND
WIRE FROM UB-1024DS
BACKBOX TO THIS STUD
ON OUTSIDE DOOR.
FASTEN USING #8 HEX
NUT PROVIDED.
Inside view of inner chassis
Inside view of outer door
DOX-1024DS(R)
Front view of outer door DOX-1024DS(R)
Front view of inner chassis
Hinges are placed over
the hinge posts on the
outside of the UB-1024DS
backbox.
BRAIDED GROUND WIRES -
One ground wire is connected
to the inner chassis and the
other to the outer front door
using the #8 Hex nuts provided
UB-1024DS
INSTRUCTION FOR MOUNTING DOX-1024DS(R) OUTER
DOOR AND INNER CHASSIS TO UB-1024DS BACKBOX
LT-1192 REV 0
June 2015
/