2. Way Basics
  3. WB-3CUBE-BK

Way Basics WB-3CUBE-BK, WB-3CUBE-EO, WB-3CUBE-NL Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Way Basics WB-3CUBE-BK Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Important
THIS SIDE UP
6
Repeat steps 1 - 4 to add
third tier.
7
Align top zBoard to unit.
Press down firmly to secure
together.
Enjoy building possibilities!
21 3 4
Carefully remove the protective
layer leaving the 3M adhesive
on zBoard (adhesive shown
in yellow).
Place alignment pins
in vertical zBoards.
5
24 Pins
6 Vertical zBoards
adhesive on top and bottom
3 Backboards
1 Top zBoard, 1 Bottom zBoard
Groove on 1 side
2 Middle zBoards
Groove on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Align middle zBoard on top
as shown. Press down firmly.
Repeat steps 1 - 4 to add
second tier.
Fit backboard into horizontal
zBoard groove. With grooves
facing backboard, align side
zBoards onto bottom
zBoard. Press down firmly.
Included
3 CUBE ORGANIZER
Help and Comments www.waybasics.com/contact
version 042017
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
/