Way Basics WB-2LP-NL Operating instructions

Brand
Way Basics
Model
WB-2LP-NL
Type
Operating instructions

This manual is also suitable for

Help and Comments www.waybasics.com/help Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
Fit backboard into horizontal
zBoard groove.
Arrange vertical zBoard with
grooves facing backboard
as shown.
5
Align vertical zBoard
to backboard.
21 3 4
6
7 8
Carefully remove the 3M
protective layer from adhesive.
Place alignment pins
in vertical zBoards.
Align middle zBoard.
Repeat steps 1 - 5 for next tier.
Align horizontal zBoard and
press firmly to secure unit
together. Visit links below
for more details.
Enjoy building possibilities!
2 Backer Boards
thin and has no adhesive
2 Horizontal zBoards
with groove on 1 side
4 Vertical zBoards
adhesive strips on 2 edges
16 Pins
1 Middle zBoard
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Included
DOUBLE CUBE
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
  • Page 1 1
  • Page 2 2

Way Basics WB-2LP-NL Operating instructions

Brand
Way Basics
Model
WB-2LP-NL
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents