Canon S31S User manual

CDI-E215-010 XXXXX

CallOll

>=

I-

(3

m

;0

O.

<

Q.

(3

¢)

_=.

O.

CallOll

DIGITAL

I

CDI-E215

iN

CAMERA

BeforeUsingtheCamera

Shooting

Usingthe ModeDial

Advanced ShootingFunctions

Playback/Erasing

igs/TransferSettings

CustomizingtheCamera

Appendix

Camera User Guide

This guide explains camera features and procedures in detail.

Fic_ridge I_IR_cr 6UBBLEJErE_fjl_'/It

DIRECT

• Automatically adjusts shooting settings to match particular

conditions

• Reduces blurriness with an image stabilizer function

• Shoot in high-speed ISO with reduced blurriness from hand or

subject movement

• Shoot movies in any mode by pressing the movie button

• Shoots movies with stereo sound

• Automatically detects camera orientation with an Intelligent

Orientation sensor

• Attach the separately sold wide converter, tele-converter lens,

or close-up lens to shoot

I

of Recorded Images

• Effortlessly transfer them to a computer with the Print/Share

button

Conventions Used in this Guide

Icons appearing below titles indicate the modes in which the

)rocedure can be used. In the example below, the mode dial can be

used in the following shooting modes.

o_ (Auto) • _ (Stitch Assist)

• _ (Portrait) • "_ (Movie)

• _ (Landscape) • _ (Program AE)

• [] (Night Scene) • "rv (Shutter-speed priority AE)

• _ (Sports) • Av (Aperture-priority AE)

• $CN (Special Scene) • M (Manual)

• See Functions Available in Each Shooting Mode (p. 167).

Q o This mark denotes issues that may affect the camera's

operation.

o his mark denotes additional topics that complement the

basic operating procedures.

You can use SD* memory cards and MultiMediaCards with this

camera. These cards are collectively called memory cards in this

guide.

* SD stands for Secure Digital, acopyright protectionsystem.

m

This product is designed to achieve excellent performance when

used with genuine Canon accessories. Canon shall not be liable for

any damage to this product and/or accidents such as fire, etc.,

caused by the malfunction of non-genuine Canon accessories (e.g.,

a leakage and/or explosion of a battery pack). Please note that this

warranty does not apply to repairs arising out of the malfunction of

non-genuine Canon accessories, although you may request such

repairs on a chargeable basis.

I

Contents

Items marked with a _j_ are lists or charts that summarize camera

functions or procedures.

Please Read ............................................. 5

Safety Precautions ........................................ 6

Preventing Malfunctions ................................... 11

Using the LCD Monitor and the Viewfinder ..................... 16

Customizing Display Information ............................ 17

Information Displayed on the LCD Monitor ..................... 20

Power Saving Function .................................... 23

Setting the World Clock ................................... 24

Menus and Settings ...................................... 26

Menu List .............................................. 28

Resetting Settings to Their Default Values ..................... 34

Formatting Memory Cards ................................. 35

Changing the Recording Pixels and Compression (Still Images) .... 36

Setting the Slow Synchro .................................. 38

Setting the Image Stabilizer Function ......................... 39

Magnified Close-Up Shooting (Super Macro) ................... 40

Using the Digital Zoom .................................... 41

Continuous Shooting ................................... 42

Using the Self-Timer ................................... 43

_ Movie Shooting ....................................... 46

E_ Shooting Panoramic Images (Stitch Assist) ................. 51

SCN Changing the Colors and Shooting ...................... 53

ShootingintheCreativeZone ............................... 57

P Program AE

Tv Setting the Shutter Speed

AM Setting the Aperture

M Manually Setting the Shutter Speed and Aperture

Registering Settings to the Shortcut Button .................. 61

Selecting an AF Frame ................................. 63

Shooting Hard-to-Focus Subjects

(Focus Lock, AF Lock, Manual Focus) ........................ 64

Switching between Focus Settings ........................... 67

Focus Bracketing (Focus-BKT Mode) ......................... 68

IS0 Adjusting the ISO Speed ............................... 69

Locking the Exposure Setting (AE Lock) ....................... 70

Shooting with FE Lock .................................... 72

Switching between Metering Modes .......................... 73

Adjusting the Exposure Compensation ........................ 75

Auto Exposure Bracketing (AEB Mode) ....................... 76

Adjusting the Tone (White Balance) .......................... 77

Shooting in a My Colors Mode .............................. 80

}.Switching between Flash Adjustment Settings ................ 82

Compensating the Flash Adjustment/Flash Output ............... 82

Switching the Timing at which the Flash Fires .................. 83

Shooting Images at Set Intervals (Intervalometer) ............... 84

C Saving Custom Settings ................................. 86

Setting the Auto Rotate Function ............................ 87

Creating an Image Destination (Folder) ....................... 88

Resetting the File Number ................................. 90

O_ Viewing Magnified Images ............................... 92

[]Viewing Images in Sets of Nine (Index Playback) ............. 93

._uJumping to Images ..................................... 94

Viewing Movies .......................................... 95

Editing Movies ........................................... 96

Rotating Images in the Display .............................. 98

Applying Effects and Playing Back ........................... 99

Adding My Colors Effects ................................. 100

{ Attaching Sound Memos to Images ....................... 102

Sound-Only Recording (Sound Recorder) .................... 103

AutomatedPlayback(SlideShows)......................... 105

ProtectingImages....................................... 109

ErasingAllImages...................................... 110

SettingtheDPOFPrintSettings............................ 111

SettingtheDPOFTransferSettings......................... 114

¢,

: , .,J. : , _=o

Camera ............................................... 120

When the power is turned on .............................. 121

LCD monitorNiewfinder .................................. 121

Shooting .............................................. 122

Shooting Movies ........................................ 126

Playback .............................................. 126

Battery ............................................... 127

TV monitor output ....................................... 128

Direct print compatible printers ............................. 128

Battery Handling ........................................ 132

Handling the Memory Card ................................ 133

Replacing the Date Battery ................................ 135

Using Rechargeable Batteries (Sold Separately) ............... 136

Using Conversion Lenses (Sold Separately) .................. 140

Using an Externally Mounted Flash (Sold Separately) ........... 143

Camera Care and Maintenance ............................ 145

Specifications .......................................... 146

Handling Precautions

Test Shots

Before you try to photograph important subjects, we highly

recommend that you shoot several trial images to confirm that the

camera is operating and being operated correctly.

Please note that Canon Inc., its subsidiaries and affiliates, and its

distributors are not liable for any consequential damages arising from

any malfunction of a camera or accessory, including memory cards,

that results in the failure of an image to be recorded or to be recorded

in a way that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use

and should never be used in a manner that infringes upon or

contravenes international or domestic copyright laws and regulations.

Please be advised that in certain cases the copying of images from

performances, exhibitions, or commercial properties by means of a

camera or other device may contravene copyright or other legal

rights even if the image was shot for personal use.

Warranty Limitations

This camera's warranty is only effective in the country of sale. If a

problem arises while the camera is in use abroad, please convey it

back to the country of sale before proceeding with a warranty claim to a

Canon Customer Support Help Desk.

For Canon Customer Support contacts, please see the customer

support list supplied with your camera.

VideoFormat

Please set the camera's video signal format to the one used in your

region before using it with a TV monitor (p. 116).

Language Setting

Please see the Basic Guide (p. 5) to change the language setting.

• Before using the camera, please ensure that you read and

understand the safety precautions described below. Always ensure

that the camera is operated correctly.

• The safety precautions noted on the following pages are intended

to instruct you in the safe and correct operation of the camera and

its accessories to prevent injuries or damage to yourself, other

persons and equipment.

• Equipment refers to the camera, battery, battery charger (sold

separately), compact power adapter (sold separately) or Externally

Mounted Flash (sold separately).

• Store this equipment out of the reach of children and infants.

Accidental damage by a child could result in serious injury.

• Neck strap: Placement of the strap around the child's neck could

result in asphyxiation.

• Memory card: If swallowed accidentally, contact a doctor

immediately.

• Do not attempt to disassemble or alter any part of the

equipment that is not expressly described in this guide.

• To avoid the risk of high-voltage electrical shock, do not

touch the flash portion of the camera if it has been damaged.

• Stop operating the equipment immediately if it emits smoke

or noxious fumes.

• Do not allow the equipment to come into contact with, or

become immersed in, water or other liquids. If the exterior

comes into contact with liquids or salt air, wipe it dry with a

soft, absorbent cloth.

Continued use of the equipment may result in fire or electrical

shock.

immediately turn the camera power off and remove the camera

battery or unplug the power cord from the power outlet. Please

consult your camera distributor or the closest Canon Customer

Support Help Desk.

• Do not use substances containing alcohol, benzine, thinners

or other flammable substances to clean or maintain the

equipment.

• Do not cut, damage, alter or place heavy items on the power cord.

• Use only recommended power accessories.

• Remove the power cord on a regular periodic basis and wipe away

the dust and dirt that collects on the plug, the exterior of the power

outlet and the surrounding area.

• Do not handle the power cord if your hands are wet.

Continued use of the equipment may result in fire or electrical

shock.

!!!!!!!!!!!!!

• Do not place the battery near a heat source or expose it to

direct flame or heat.

• The battery should not be immersed in water.

• Do not attempt to disassemble, alter or apply heat to the

battery.

• Avoid dropping or subjecting the batteries to severe impacts

that could damage the casing.

• Use only recommended batteries and accessories.

Use of batteries not expressly recommended for this equipment

may cause explosions or leaks, resulting in fire, injury and damage

to the surroundings. In the event that a battery leaks and the eyes,

mouth, skin or clothing contact these substances, immediately flush

with water and seek medical assistance.

• Disconnect the battery charger and compact power adapter

from both the camera and the power outlet after recharging or

when they are not in use to avoid fire and other hazards.

• Do not place anything, such as tablecloths, carpets, bedding

or cushions, on top of the battery charger while it is charging.

Continued use over a Iong period may cause the units to overheat

and distort, resulting in fire.

• Please use Canon AA-size NiMH batteries and charger

recommended for use with these batteries.

• The compact power adapter are designed for exclusive use

with your camera. Do not use it with other products or

batteries.

There is a risk of overheating and distortion which could result in fire

or electrical shock.

• Before you discard a battery, cover the terminals with tape or

other insulators to prevent direct contact with other objects.

Contact with the metallic components of other materials in waste

containers may Iead to fire or explosions.

iiiillliiiiill i iiliiliiliii liliiiiilli i iiliiliiliiliil

• Do not trigger the flash in close proximity to human or animal

eyes. Exposure to the intense light produced by the flash may

damage eyesight.

In particular, remain at least one meter (39 inches) away from

infants when using the flash.

• Keep objects that are sensitive to magnetic fields (such as

credit cards) away from the speaker of the camera.

Such items may lose data or stop working.

• When using the optional Canon Wide Converter, Tele

Converter, Close-up Lens, or Conversion Lens Adaptor, be

sure to attach them firmly.

If the lens becomes loose and falls off, it may crack, and the shards

of glass may lead to cuts.

m[_rt[tBlT_

i i iiii iii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii iii ij i i iii!lii! lilili....

• Do not get the camera caught on other objects or subject it to

strong impacts or shocks when wearing or holding it bythe

neck strap.

Doing so may result in injury or damage to the camera.

• Do not store the equipment in humid or dusty areas.

• Do not allow metal objects (such as pins or keys) or dirt to

contact the charger terminals or plug.

Such conditions could lead to fire, electrical shock or other damage.

• Avoid using, placing or storing the equipment in places

subject to strong sunlight or high temperatures, such as the

dashboard or trunk (boot) of a car.

• Do not use the camera in such a way that would cause it to

exceed the rating of the power outlet or wiring. Do not use if

the power cord or plug are damaged, or if not fully plugged

into the outlet.

• Do not use in locations with poor ventilation.

The above-mentioned can cause leakage, overheating or explosion,

resulting in fire, bums or other injuries. High temperatures may also

cause deformation of the casing.

• When not using the camera for extended periods of time,

remove the battery from the camera or battery charger and

store the equipment in a safe place.

Storing the camera for extended periods with batteries installed will

cause battery leakage and damage the camera.

10

• Do not operate the flash with dirt, dust or other items stuck to

the surface of the flash.

• Be careful not to cover the flash with your fingers or clothing

when shooting.

The flash may be damaged and emit smoke or noise. The resulting

heat build-up could damage the flash.

• Do not touch the surface of the flash after taking several

pictures in rapid succession.

Doing so could result in burns.

I Itrm

• Never place the camera in close proximity to electric motors

or other equipment generating strong electromagnetic fields.

Exposure to strong magnetic fields may cause malfunctions or

corrupt image data.

• When moving the equipment rapidly between hot and cold

temperatures, you can avoid condensation by placing the

equipment in an airtight, resealable plastic bag and letting it

adjust to temperature changes slowly before removing it from

the bag.

Moving the equipment rapidly between hot and cold temperatures

may cause condensation (water droplets) to form on its extemat and

intemat surfaces.

• Stop using the camera immediately.

Continued use may damage the equipment. Remove the memory

card and battery or compact power adapter from the camera and

wait until the moisture evaporates completely before resuming use.

11

l BeforeUsingthe Camera-TheComponentsGuide

Front View

® Neck Strap Mounts

® ®

® Self-timer Lamp/Tally Lamp/Red-eye Reduction Lamp (pp. 43, 46, 28)

® Flash (Basic Guide p. 11)

® Microphone (R) (pp. 102, 103)

® Microphone (L) (pp. 102, 103)

® AF-assist Beam (p. 28)

® Lens

® Ring Release Button (p. 141)

® Tripod Socket (p. 143)

Battery Cover (Basic Guide p. 1)

Memory Card Slot Cover (Basic Guide p. 1)

_.._Terminal Cover

DIGITAL Terminal (Basic Guide p. 21 )

L_ DC IN Terminal (p. 139)

Attaching the Neck Strap

Attach the strap as illustrated.

Check that the strap does not

come loose from the strap

mount when pulled. Perform

the same steps on the other

side of the camera.

Attaching the Lens Cap

Fit the lens cap over the lens

casing so that it covers the

entire lens.

Always replace the lens cap

after use.

eAttach the lens cap cord to the strap.

• Remove the lens cap before turning on the camera's

power.

0

o

3

"C3

o

Q

=_.

13

Back View

_ (Flash)/_ (Microphone) Button (pp, 102, 103, Basic Guide p, 11 )

Mode Dial (p, 46, Basic Guide p, 8)

Shutter Button (Basic Guide p, 6)

_ Zoom Lever

Shooting: [-_] (Telephoto)/[] (Wide Angle) (p, 41, Basic Guide p, 10)

Playback: O_ (Zoom in)/l_ (Zoom out) (p, 92)

_ (Continuous)/q_,_ (Self-timer) Button (pp, 42, 43)

® Power/Mode Indicator

Orange: Shooting mode Green: Playback mode/Printer connection

Yellow: Computer connection

_ OFF Button

Mode Lever (Basic Guide p, 3)

AN' OUT (audio/video output) terminal (p, 116)

Terminal Cover

LCD Monitor (Basic Guide p, 2)

@ Speaker

@ _ (Macro) Button (Basic Guide p, 12)

MF (Manual Focus) Button (p, 66)

14

Operation Panel

I

m

B"

3

(!_ Diopter Adjustment Dial (p, 16)

Viewfinder (p, 16)

=l"

_ Movie Button (p, 46, Basic Guide p, 7)

_ Omni Selector

A(Up) V(Down) O

3

_(Lef[) I_(Right) "O

_ Indicator O

Blinking Red: Recording to memory card/Reading memory card/Erasing

from memory card/Transmitting data (during a computer connection) t_"

MENU Button (p, 26, Basic Guide p, 16) v,6,}

CZ_SET/_ (AF Frame Selector) Button (p, 63, Basic Guide p, 15) _,

DISP, Button (p, 16) r-,

(_ _ (Shor[cut)/[_cv (Print/Share) Button (p, 61, Basic Guide pp, 17, 24)

ISO (ISO Speed)/.t_o (Jump) Button (pp, 69, 94)

_._ FUNC, (Function)/@(Single Image Erase) Button (p, 26,

Basic Guide pp, 15, 14)

15

l Before Using the Camera - Operations

Pressing the DISP. button switches the display mode.

The screens that are displayed are based on the [Custom Display]

settings (p. 17).

Also, closing the LCD monitor causes the viewfinder to display.

1 Press the DISP. button.

• The display mode changes asfollows.

Shooting Mode (a)

When theLCD monitor isopened.

(Default setting)

i_11_ LCD Monitor Display

(No Information)

!

LCD Monitor Display.1

(Information View)

!

Viewfinder Display

(No Information)

! _?'2

m Viewfinder Display.! .............................

(InformationView)

Playback Mode (I-_-])

"1 Shooting information, grid lines, anda histogram (p, TV, AV, and

M only) are displayed with the default settings.

*2 When the LCD monitor is closed.

• In the shooting modes, the shooting information displays for

approximately 6 sec. when settings such as the flash setting are

changed, regardless of the selected display mode.

• You can adjust the brightness for the LCD monitor (or

viewfinder) (p. 31).

• If the surroundings are too bright (for example, when you are

shooting outdoors) and images on the LCD monitor are not

clear, use the viewfinder for shooting. Adjust the viewfinder

focus (p. 20) with the diopter adjustment dial (p. 15) so the

displayed information appears cteady.

eTheLCDmonitorandviewfinderdisplaysettingsare

rememberedevenaf[erthecamerapoweristurnedoff.

• TheLCDmonitorwillnotswitchtothedetaileddisplayinthe

indexplaybackmode(p.93).

Youcanselectwhetherornottodisplaythefollowinginformationon

theLCDmonitorandviewfinderinthecurrentshootingmode,and

switchbetweendisplaysbypressingtheDISP.button.

• Shootinginfo.

• GridLines

• Histogram*(p.19)

* P, Tv, AM, and M only

1 r_] (Rec.) Menu _ [Custom

Display].

See Menus and Settings (p. 27)

2 _C.?/Viewfinder] _J*I_J*IE_J*I

• Using the A V, _1,and • buttons,

select the LCD monitor or viewfinder

you wish to display information for

when the DISP. button is pressed, and

press the SET button to place a "/

mark.

• You cannot disable the display setting

of the currently selected display

location.

• Display locations marked with _ do

not display even when the DISP.

button is pressed.

* Default settings.

Viewfinder

LCD monitor

Currently selected

display location

o0

(o

5"

t-

(D

3

(D

6

17

3 [Shooting Info]*/[Grid Lines]*/ Does notdisplay whenthe

[Histogram]. DISP.button is pressed

• Using the A, V, _1,and • buttons,

select the items you wish to display on

the LCD monitor or viewfinder, and

press the SET button to place a ,/

mark.

• Display locations with no ,/marks will

not have any information displayed.

• Even though items that are greyed out r

can be set, they will not display in this / Itemswith ,/marks

shooting mode. are displayed

No Information

* Default setting:[_, _: No Information

_, _ : Displays shooting information, grid lines,

and a histogram

18

Page is loading ...

Canon S31S User manual

Canon S31S User manual

Related papers

Other documents