Denver LSC-531 User manual

Category
Strip lights
Type
User manual

This manual is also suitable for

Denver LSC-531 is a smart lighting product that can be controlled via the Denver Smart Home app, allowing you to enjoy the convenience of smart lighting in your home. With the app, you can easily set up and control the lighting, adjust brightness, set schedules, and create different lighting scenes to suit your needs. The Denver LSC-531 is compatible with 2.4 GHz Wi-Fi networks and requires no additional hub or gateway for operation.

Denver LSC-531 is a smart lighting product that can be controlled via the Denver Smart Home app, allowing you to enjoy the convenience of smart lighting in your home. With the app, you can easily set up and control the lighting, adjust brightness, set schedules, and create different lighting scenes to suit your needs. The Denver LSC-531 is compatible with 2.4 GHz Wi-Fi networks and requires no additional hub or gateway for operation.

--Instructions
1
Denver Smart Home
Android App iOS App
1 2 3
2
Lighting product instructions for use
Universal Edition Denver Smart Home App
Preparation for use
1. Power on the lamp while ensuring that your smartphone is connected to the 2.4 GHz Wi-
Fi network;
2. Download and open the app.
Search for “Denver Smart Homein the App Store or scan the QR code below or on the
package to download and install the app.
Tap the "Register" button to register if you download it for the first time. If you already
have an account, tap the "Login" button.
Device Network configuration
1. Open the Denver Smart Home app and access the "Devices" page. Tap the "+" mark in
the upper right corner of the page.
2. Select "Lighting devices" on the device list page.
3. Two configuration modes are available for connection: EZ mode and AP mode.
1) EZ Mode
Ensure the light flashes quickly (twice a second).This indicates that the lightstrip is in
configuration mode.
If it is not blinking, then push and hold the reset button until it turns off. Then let go and it
goes into configuration mode.. Tap the "Confirm light blinks rapidly" button on the “Add
Device” page to start connection.
Model identifier
Denver LSC-531
Input voltage
220-240VAC
Input AC frequency
50Hz/60Hz
Output voltage
12VDC
Output current
2A
Output power
24W
Average active efficiency
82%
Efficiency at low load (10%)
70%
No-load power consumption
0.5W
3
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment contains materials, components and substances that can be
hazardous to your health and the environment, if the waste material (discarded electric and
electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen
above. This symbol signifies that electric and electronic equipment should not be disposed of
with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can
either be submitted free of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available at the technical department
of your city.
Hereby, Inter Sales A/S declares that the radio equipment type LSC-531 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: www.denver-electronics.com and then click the search ICON
on topline of website. Write model number: LSC-531. Now enter product page, and red
directive is found under downloads/other downloads.
Operating Frequency Range: 50Hz/60Hz
Max Output Power: 24W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
ALLE RETTIGHEDER RESERVERET, COPYRIGHT DENVER ELECTRONICS A/S
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Denver LSC-531 User manual

Category
Strip lights
Type
User manual
This manual is also suitable for

Denver LSC-531 is a smart lighting product that can be controlled via the Denver Smart Home app, allowing you to enjoy the convenience of smart lighting in your home. With the app, you can easily set up and control the lighting, adjust brightness, set schedules, and create different lighting scenes to suit your needs. The Denver LSC-531 is compatible with 2.4 GHz Wi-Fi networks and requires no additional hub or gateway for operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI