Rug Doctor 95503 User guide

User’s Guide

3 Safety Instructions

5 Cleaning Carpet and Upholstery

7 Maintenance

8 Replacement Parts & Troubleshooting

10 Warranty and Product Registration

11 Rug Doctor Cleaning Products

Retain for your records: To save time if

calling Customer Service for information about

your Rug Doctor

®

Machine, it is recommended

that you record your machine information here:

Serial # is found inside machine behind the recovery

tank stamped into the body of the machine.

Serial #

2

was founded by a professional carpet cleaner in

1972 with the rst machines having been designed

and built for professional use. A brand was born

and soon after, Rug Doctor launched the rst rental

program that made professional-grade carpet

cleaning machines available to the public. More than

35 years later, Rug Doctor has grown to become

a household name and continues as the leader in

carpet care rental systems with powerful machines

and innovative products.

Rug Doctor, Inc.

4701 Old Shepard Place

Plano, Texas 75093

E-mail: consumer. support@rugdoctor. com

Web Site: www.rugdoctor. com

3

IMPORTANT SAFETY INSTRUCTIONS

Please read all instructions before using. When using an electrical appliance, basic precautions

should always be followed, including the following:

WARNING — To reduce the risk of re, electric shock, or injury:

• Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

• To reduce the risk of re and electric shock due to internal component damage, use only Rug Doctor

®

cleaning

products intended for use with this appliance. See the Cleaning Product section of this manual.

WARNING— To reduce the risk of electric shock - use indoors only.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left

outdoors, or dropped into water, return it to a service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners. Do not run appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and

anything that may reduce air ow.

• Keep hair, loose clothing, ngers, and all parts of body away from openings and moving parts.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up ammable or combustible liquids such as gasoline or use in areas where they may be present.

• Do not use to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use without lters in place.

• Connect to a properly grounded outlet only. See “Grounding Instructions.”

• Use only on surfaces moistened by cleaning process or small spills. Do not place machine in standing water

or try to clear ooded areas.

• Do not clean over oor electrical outlets.

• Do not use without upper (white) tank in place.

• The use of an extension cord is not recommended.

Failure to follow the foregoing instructions may expose the user to electric shock, personal injury and/or death.

SAVE THESE INSTRUCTIONS

Grounding Instructions

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a

path of least resistance for electric current to reduce the risk of electric shock. This appliance

is equipped with a cord having an equipment grounding conductor and grounding plug. The

plug must be inserted into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

WARNING

Improper connection of equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or service person if you are in doubt as to whether the

outlet is properly grounded. Do not modify the plug provided with the appliance—if it will not

t the outlet, have a proper outlet installed by a qualied electrician. This appliance is for use

on a nominal 120-volt circuit and has a grounded plug that looks like the plug illustrated in

Figure A. Make sure that the appliance is connected to an outlet having the same conguration

as the plug. No adapter should be used with this appliance.

Grounded Outlet Box

Grounded Outlet

ALCI Reset

Grounding Pin

Figure A

4

Cleaning With Your Rug Doctor Machine And Products

Read all instructions completely before you begin. To assure proper results, test carpets and

upholstery for colorfastness. Wet an inconspicuous area with a small amount of cleaner.

After 1–2 minutes, blot with a white paper towel and check for color transfer. Follow these

additional guidelines when cleaning with your Rug Doctor machine:

• Rug Doctor machines and Rug Doctor cleaning products are safe for most carpets. However, you risk damage

to carpets and hard oor surfaces not intended for water extraction method cleaning. Do not use the Rug Doctor

machine or cleaning products on natural ber oriental rugs (silk or wool), hand-loomed wool rugs, braided rugs,

sisal or jute carpets; hardwood or laminate ooring. Some stains require professional treatment. Use cool water

when cleaning wool, wool blends or delicate bers.

• Rug Doctor machines and Rug Doctor cleaning products are safe for many fabrics, even delicate bers. However, you

risk damage to fabrics not intended for water extraction method cleaning. Do not use Rug Doctor machines or

products to clean fabric with cleaning codes S or X, silk, Haitian cotton, velour, brushed corduroy, leather or non-

colorfast fabrics, mattresses or mattress toppers made with memory foam, foam or goose down. Some stains

require professional treatment. Use cool water when cleaning wool, wool blends or delicate bers.

• The machine was designed for use on carpet and upholstery applications in accordance with the instructions and

recommendations in this manual. If you use the Rug Doctor machine to clean surfaces other than carpet and

upholstery, such as hard surface oors, use only Rug Doctor recommended products. Rug Doctor Oxy-Steam

®

Carpet

Cleaner can be safely and effectively used for either carpeting or water-safe hard surface oor coverings.

• Do NOT put bleach, dye or products other than Rug Doctor cleaners in this machine. Use of inappropriate products

may cause this machine to malfunction and may result in carpet or machine damage.

• Foam should never be ingested through the dome lter. Damage to the carpet and/or vacuum motor could result.

• To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only Rug Doctor

®

cleaning products intended for use with this appliance. See the Cleaning Product section of this manual.

An de réduire les risques d’incendie et de décharge électrique provoqués par des composants internes endommagés,

utilisez uniquement les produits de nettoyage Rug Doctor conçus pour ce produit. Lire la section consacrée aux

produits de nettoyage dans le présent manuel.

• Avoid picking up hard or sharp objects with the carpet cleaning machine. They may damage the machine. Do not

use the machine for dry vacuuming because this machine does not have a ne dust lter. Dry vacuuming damages the

vacuum motor.

• Do not use the machine to vacuum large quantities of liquid, such as a ooded basement or large spill. This machine is

not equipped with an automatic overow shutoff.

• To avoid damage, do not place the machine or hand tool on hardwood or laminate ooring or allow any solution or

overspray to contact such ooring.

• To avoid pump damage, do not continue to press the spray (pump) switch when the solution tank is empty.

Read instructions carefully. Rug Doctor, Inc. is not responsible for damage due to misuse of this machine.

Carpet Cleaning Tips For Best Results

• Treating difcult spots. Rug Doctor machines are designed to deep clean and extract in one cleaning pass. Your best

choice for cleaning difcult spots, stains or trafc areas is to use Rug Doctor’s specialty products: Hi-Trafc Pre-

Treatment, Spot & Stain Remover, Urine Eliminator, or Odor Remover.

• Avoid over-wetting your carpet. Don’t go over a heavily-soiled spot more than 2 times. Berber, Multi-Level or Looped

carpets retain more liquid. For these types of carpets, DO NOT repeat cleaning passes. If additional cleaning is desired,

allow carpets to dry before attempting to reclean heavily-soiled areas. Because they retain more liquid, Berber carpets

that are overwet can experience “wick up” of soils or spills very deeply embedded in the carpet or backing. If you

experience this problem, allow area to dry completely then clean again using single, quick passes (1-2 feet per second).

• Cleaning Berber carpet; You can use your Rug Doctor machine to clean Berber carpet. For best results, make only

one pass while depressing the thumb switch to release solution. Make a second pass over the same area without

pressing the switch so that you are only vacuuming the liquid. Make sure the vacuum slot at the front bottom edge

of the machine is snug against the carpet.

• Overlap passes slightly to cover all areas. IMPORTANT: When pressing the red button, keep machine moving so

vibrating brush does not agitate in one place.

• Liquid recovery. You should recover 70 - 80% of the liquid used depending on your carpet type. With Berber carpet, you

may recover a little less liquid.

• Avoid excessive foam in the recovery tank, which can be expelled through the machine and may affect your carpet. If

foaming occurs turn off the machine and empty the upper white tank if it is full.

• If you replace furniture before the carpet is completely dry, place aluminum foil under furniture legs to prevent stains.

Leave aluminum foil under furniture legs until carpet is completely dry.

• For faster drying, ventilate area. Open doors and windows. Place fans pointed downward on carpet. Turn on heat in

damp or cold weather. Turn on air conditioner in humid or hot weather. This is highly recommended when cleaning

Berber carpets.

5

Before You Begin

Review machine safety warnings found in

the front of this manual. Using a normal dry

vacuum cleaner, vacuum the area you want

to clean to remove loose dirt before using

the Rug Doctor machine. This will help

keep the brushes and water vacuum system

working efciently. Pre-treat any special

problem areas with appropriate Rug Doctor

solutions. For example, use Urine Eliminator

on tough pet stains and other bio-origin

stains.

Set Up

Check the back of the machine to ensure

hose connections are secure and set to

clean carpet instead of upholstery (ILLUS.1)

Lift up on the recovery latch and raise dome

hood (ILLUS.2). Remove the recovery tank.

Depending on how dirty your carpets are,

add 2oz- 4oz (1/4 to 1/2) cup of Rug Doctor

Oxy-Steam

®

Carpet Cleaner product per

gallon of hot tap water in a clean bucket

(ILLUS.3). Use caution to insure water is not

so hot as to scald or burn skin.

The lower tank capacity for the Rug Doctor

Mighty Pro

X3™ is 3 gallons. Fill the lower

tank with the Rug Doctor Oxy-Steam

®

Cleaning solution by pouring through the

white lter screen. Machine is full when

liquid halfway covers the lter screen

(ILLUS.4). Replace recovery tank and close

the dome hood (ILLUS.2).

Plug in the power cord and position the

machine. Refer to the label on the side of

the handle. Slide the switch to the “Carpet”

position for carpet cleaning (ILLUS.5).

Cleaning Carpets

(ILLUS.1)

(ILLUS.2)

(ILLUS.3)

(ILLUS.4)

(ILLUS.5)

(ILLUS.6)

(ILLUS.7)

(ILLUS.8)

(ILLUS.9)

press for spray

tool / 0 /carpet “0” is off position

reset button is located below

recovery latch

& dome hood

recovery tank

lower tank

vacuum slot

(bottom edge

of machine)

dome lter

handle release

Start Cleaning

While depressing the press for spray red button

on the top of the handle (ILLUS.6), pull the

machine slowly and steadily backward in a

straight line, keeping vacuum slot against the

carpet surface. On lightly soiled carpets you can

pull the machine quickly at one foot per second.

For moderately, or heavily soiled carpets, pull

the machine at approximately one foot every two

seconds. You will begin to see soiled solution

entering the clear dome. (If you don’t, stop and

refer to the Troubleshooting section).

IMPORTANT: When depressing the press for

spray red button, keep machine moving so the

vibrating brush does not agitate in one place

(ILLUS.7).

Release the red button 6 to 12 inches before

ending each pass to stop cleaning solution. Tilt

machine back and push it forward to start a new

backward cleaning pass (ILLUS.8).

Continue cleaning in this manner, overlapping

each pass slightly. When the lower tank runs

out of cleaning solution, the pump sound will

increase in volume slightly and dirty water will

stop entering the dome. Switch the machine to

“0” for the off position. Remove and empty the

recovery tank by pouring dirty solution into a

toilet or outdoors (ILLUS.9).

Rinse the recovery tank and rell the lower tank

with clean solution/water mixture using a clean

bucket. If you are near the end of your cleaning

job, ll the lower tank half full so it empties by

the end of your job. Replace the recovery tank.

Continue the cleaning process until area to be

cleaned is covered. When cleaning is complete,

switch the machine to “0” for the off position. To

drain and clean the machine, please refer to the

Maintaining Your Rug Doctor Machine section.

To learn more about how to clean your carpets, refer to “Using your Rug Doctor” section on www.rugdoctor.com

6

Cleaning Upholstery

Set Up

Prepare surfaces for cleaning by thoroughly

vacuuming or brushing. When cleaning

and drying cushions, rst spread sheets or

towels on the oor as a drying surface for

the dampened cushions.

Disconnect the machine’s large vacuum

hose. Reconnect the top portion to the large

vacuum hose of hand tool. Slide up the brass

“quick coupler” ring and pull out the small

solution hose (ILLUS.1).

Slide up the ring again to insert the metal

end of the hand tool solution hose. Release

the brass ring to secure. Tug gently on the

hose to make certain the connection is

secure.

Remove the recovery tank, mix Rug Doctor

Upholstery Cleaner in a clean bucket

according to label directions and pour into

Lower tank (ILLUS.2).

Slip the tank back in place and close the

dome hood (ILLUS.3). Plug in the power cord

and position the machine.

Turn on the machine by sliding the switch to

the “Tool” position on the side of the handle

(ILLUS.4).

Start Cleaning

Test upholstery for colorfastness by rst cleaning a

small, hidden area, then rubbing the test area with

a white paper towel. If no color appears, continue

cleaning. A little color on the towel means there’s

some chance of color running, but it’s likely you can

still clean safely. Try using cool or cold water and test

again with a white paper towel.

Working at a slow, steady pace, begin cleaning by

squeezing the hand tool lever as you pull the tool over

fabric (ILLUS.5). Overlap strokes slightly.

When cleaning is complete, switch the machine to “0”

for the off position.

Disconnect both of the hoses from the machine.

Holding the hose ends over a sink, squeeze the hand

tool trigger until all liquid is drained.

To drain and clean the machine, refer to the

Maintaining Your Rug Doctor Machine section.

Reconnect the machine vacuum and solution hoses.

NOTE: For velvet upholstery, uff up damp pile with a

soft brush or towel to keep from matting.

Rug Doctor

Upholstery /

Hand Tool

Rug Doctor

Upholstery

Cleaner

Special Application

(ILLUS.1) (ILLUS.2)

(ILLUS.3) (ILLUS.4)

(ILLUS.5)

7

Maintaining Your Rug Doctor Machine

Follow these guidelines to ensure your Rug Doctor machine will last a lifetime.

Failure to comply with the instructions, cautions and safety warnings in this manual

voids the warranty.

• Drain the machine by spraying out remaining solution over a oor drain or outdoors (never in rain or on wet ground).

Do not allow machine to stand in liquid while emptying. For best results, spray out liquid with machine set to

“Tool” to prevent brushes from movement and wear while emptying. Using this method you can spray out remaining

liquid either through Hand Tool or machine spray tips.

• Clean the vibrating brush by pulling down on the plastic brush body (Refer to Replacing A Brush Section). After each

use, unplug the machine from power source and use your nger or an old comb to remove any debris from the

vibrating brush. If you used any Rug Doctor attachments, also remove debris from the attachment vacuum slot.

• Clean the vacuum lter. After each use, inspect the cylindrical lter screen located inside of the clear plastic dome

on the front of the machine. If debris is present, remove the lter screen by pushing it right and compressing the

spring until the lter end is clear of the dome. Clean by running water through the screen from the inside to the

outside. Replace by compressing the spring wire and inserting the black end securely into place in the hole

inside the dome.

• Clean the solution tank lter screen. After each use, inspect the rectangular lter screen located in the ll opening of

the solution (lower) tank. If debris is present, remove screws that hold the lter in place and remove lter from the

solution tank opening. Clean lter by holding it under a water faucet and letting the water run through the lter in the

opposite direction from the normal lling ow. Replace the lter screen and fasten it in place with the two

mounting screws.

• Clean the solution tank line strainer. When the solution tank lter screen is removed for cleaning, inspect the

cylindrical lter mounted on the end of the solution line inside of the lower tank. If debris is present, remove the lter

by pulling it off the solution line. Hold the lter under owing water until debris is cleared. Replace the lter by

pushing it over the end of the solution hose.

• Remove carpet bers from vacuum slot. Periodically check the vacuum slot on the bottom front of the machine for

debris. Remove any ber, hair or other debris that may be caught in the slot. Always make sure the machine is in the

“0” position (for off), unplugged and the tanks are empty.



Caring For Your Machine

• Always use recommended Rug Doctor cleaning agents. Do not use dye or bleach in this machine. Dye and bleach will

permanently damage your carpets.

• Store the machine indoors out of dusty, wet and freezing areas. This prolongs the life of your Rug Doctor machine and

helps keep it trouble free.

• Do not expose Rug Doctor machines to freezing temperatures for a prolonged period of time. In freezing temperatures,

liquid in the machine system can damage the pump and solution hoses.

• Use care when transporting your Rug Doctor machine. Rug Doctor machines are designed for rugged use. However,

avoid mishandling such as dropping the unit or transporting it in an open van or truck. Jarring from sudden vehicle

starts or stops can damage the machine.

Obtaining Service For Your Machine

• Register your new Rug Doctor machine by completing our online Product Registration form at www.rugdoctor.com.

The registration entitles you to service work and replacement parts during the warranty period should your machine

need repairs.

• Do not attempt repair on a machine under warranty. Servicing and warranty repairs should be performed by an

authorized service representative only.

• If you experience an operational problem, call our Consumer Support Hotline at 1-800 RUG DOCTOR (1-800-784-3628).

Basic replacement parts can be ordered through Consumer Support. If repair is required, you will be directed to take

or ship your Rug Doctor machine to the nearest authorized repair station. Rug Doctor recommends you keep the

original carton and packing materials.

• When returning a machine for non-warranty or out of warranty repairs, always insure the machine for its full

value before shipping.

8

Available Replacement Parts For Your Machine

Refer to the following diagram if you need to order basic replacement parts for your machine.

Do not use replacement parts other than those available through Rug Doctor. Do not attempt

repairs on a machine under warranty.

Replacing A Brush

1. The brush strip is held in place by a snap t connection.

2. Remove the old brush strip by pulling down on the plastic brush body.

3. Insert the new brush strip until it is fully seated.

Troubleshooting

Use this section to help resolve any issues you experience with your machine. If you do not

nd the answer to your questions here, please contact the Rug Doctor Hotline at

1-800 RUG DOCTOR (1-800-784-3628) or through the Rug Doctor web site at RugDoctor.com.

The Rug Doctor Hotline is available 7 days a week (except on legal holidays) from

8 am to 8 pm (CST).

Power Issues

Always use a grounded outlet with this machine. Not doing so can result in electrical shock.

Refer to the Grounding Instructions section for more information.

The machine switch is on, but there is no power.

Try the following:

• Make sure the electrical cord is plugged in. If the electrical outlet is connected to a wall switch, make sure the wall

switch is in the ON position.

• Check the circuit breaker switch on the machine and reset if necessary.

• Check the ALCI plug and reset if necessary.

• Check the wall circuit breaker. If it is off or if a fuse is blown, unplug the machine and reset the circuit breaker or

replace the fuse. Plug the machine into a different wall plug before beginning again.

• Check the power cord. If it is defective, please contact the manufacturer or an authorized service agent.

An authorized professional must repair the machine.

The machine switch is on, but there is intermittent power.

Please contact the manufacturer or an authorized service agent. Faulty electrical cable,

defective switches, or loose terminal connections can cause intermittence. An authorized

professional must repair the machine.

Vacuum Issues

Try the following:

• Make sure the dome hood is closed and securely sealed.

• Check the hose connection at the back of the machine and secure if necessary.

• Clean the lter that is in the dome.

• Remove any accumulated debris around the vacuum slot.

If none of the above steps x the problem, the vacuum hose assembly inside the machine may be defective.

Contact the manufacturer or an authorized service agent. An authorized professional must repair the machine.

10460

Dome Filter

10461 Lower Tank

Sump Filter

93084 Recovery

Bucket

60400 Lower Tank

Fill Filter

60778 Wheel

20091 Screw, #8 X 1/2”

(For lower tank Fill Filter)

60779 Brush Strip

Replacing A Brush

9

Troubleshooting

Vacuum Issues

The machine is on, but the vacuum motor works intermittently.

Please contact the manufacturer or an authorized service agent. A loose wiring connection

can cause intermittence. An authorized professional must repair the machine.

Solution System Issues

The machine lost water pressure.

Check the level of solution in the lower tank and rell if necessary.

The machine is on and the spray button or hand tool lever is depressed,

but no spray comes out.

Try the following:

• Make sure the ON switch is set to the appropriate setting, either Tool or Carpet, not “0” for off.

• Check the small solution line hose at the back of the machine. Connect the line securely at the quick

coupler if necessary.

• Brush the spray tips with a soft-bristle brush, such as an old toothbrush, to remove any build-up that may

be clogging the tips. Do not brush spray tips with any kind of wire or metal brush. Do not try to unclog the tip

by poking it with a pin or any other object.

• Hand Tool only: Remove the spray tip with a nut driver. Rinse the tip, blow air through it to remove any build-up that may be

clogging the tip. Reattach the tip with the nut driver. Make sure to position the tip opening so that it sprays side to side.

• Check the lower tank sump lter inside the lower tank and clean if necessary. Refer to the Maintaining Your Rug Doctor

Machine section in this document for more information.

The spray from the spray tip(s) is weak or uneven.

Try the following:

• Brush the spray tips with a soft-bristle brush, such as an old toothbrush, to remove any build-up that may be clogging

the tip. Do not brush spray tips with any kind of wire or metal brush. Do not try to unclog the tip by poking it with a pin

or any other object.

• Hand Tool only: Remove the spray tip with a nut driver. Rinse the tip and blow air through it to remove any build-up that

may be clogging the tip. Reattach the tip with the nut driver. Make sure to position the tip opening so that it sprays side

to side.

• Check the lower tank sump lter inside the lower tank and clean if necessary. Refer to the Maintaining Your Rug Doctor

Machine section in this document for more information.

Excessive Foaming

Foam in the recovery tank is caused most often by cleaning carpet where spray foams have been

used previously, or by using other brands of cleaning solutions. Rug Doctor cleaning solutions are

specially designed to maximize performance. If foam occurs, turn off the machine and empty the

recovery tank.

Carpet Discoloration / Stained areas appear on the carpet after cleaning

Try the following:

• Hand Tool only: Remove the spray tip with a nut driver. Rinse the tip and blow air through it to remove any build-up that

may be clogging the tip. Reattach the tip with the nut driver. Make sure to position the tip opening so that it sprays

side to side.

• After the carpet is completely dry, clean the area with your Rug Doctor machine making sure to avoid overwetting the

carpet. Stains may continue to appear if the carpet is overwetted.

Streaks appear on the carpet during cleaning

Try the following:

• Brush the spray tips with a soft-bristle brush, such as an old toothbrush, to remove any build-up that may be clogging

the tip. Do not brush spray tips with any kind of wire or metal brush. Do not try to unclog the tip by poking it with a pin

or any other object. Check the brush bristles for damage or wear. Replace the brush if necessary.

(continued)

10

Seven (7) Year Limited Consumer Warranty

Rug Doctor gives the original purchaser, who retains proof of purchase, from Rug Doctor or an authorized Rug Doctor

dealer, this limited warranty (“warranty”) for your Mighty Pro

X3™ carpet cleaning machine acquired for normal household

use (commercial or rental use is excluded). You are responsible to notify Rug Doctor within thirty (30) days of original

purchase if any parts or components are missing on your Mighty Pro

X3™ machine.

What Does This Warranty Cover / How Long Does The Warranty Last

Rug Doctor will, for the original purchaser, repair or replace including labor, any part that is defective in

material or workmanship within seven (7) years of purchase; ten (10) years on outer housing parts.

This warranty applies to machines used for normal household purposes only.

What The Warranty Does Not Cover

The following exclusions apply to machine and part(s) failures due to: 1) normal wear and tear; 2) machine alterations

and 3) abuse or misuse of the machine, including use not in accordance with this “Instruction Guide.” This warranty

does not provide for a refund of the purchase price. For best operating efciency and cleaning, use of Rug Doctor

products is recommended. Use of the machine for rental voids the warranty and is not permitted under Federal Law (see

“UNAUTHORIZED USE” statement below). Commercial use is excluded under this warranty except as set forth in the

“ONE YEAR LIMITED COMMERCIAL WARRANTY” below. Rug Doctor is not liable for any consequential or incidental

damages of any nature involving the purchase/use of your carpet cleaning machine. In no event shall Rug Doctor’s

liability exceed the purchase price of the machine. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you.

Expenses

If a machine is returned to a warranty center for repair within thirty (30) days of original purchase, Rug Doctor will pay the

freight charges both to a warranty center and back to you. Thereafter, you may be directed to take the machine to a local

repair center or required to ship the machine to a Rug Doctor warranty center should additional repairs be required during

the warranty period. You will be responsible to pay any freight charges for shipment to the warranty center for repairs

occurring after the initial thirty (30) days. Rug Doctor will pay the freight charges back to you.

How State Laws Apply

This warranty gives you specic legal rights. You may also have other rights which vary from state to state.

How Do I Get Service Under This Warranty?

TO OBTAIN WARRANTY ASSISTANCE, please call 1-800 RUG DOCTOR (1-800-784-3628) (8 am to 5 pm Mon - Fri CST)

or e-mail consumer. support@rugdoctor.com. Rug Doctor will need the following information in order to assist you: your

name, address and telephone number, product model and serial number, proof of purchase showing date and place of

purchase. Please explain the nature of the problem. Rug Doctor will review all the facts involved and advise you as to

recommended procedure. We recommend you keep the original carton and packing materials.

Rug Doctor, Inc.

4701 Old Shepard Place

Plano, Texas 75093

E-mail: consumer. support@rugdoctor. com

Web Site: www.rugdoctor. com

Unauthorized Use

Use of this carpet cleaning machine with Rug Doctor trademarks for rental purposes is UNAUTHORIZED and is in violation

of U.S.C. Section 1114(I) and 15 U.S.C. Section 1125(a).

One (1) Year Limited Commercial Warranty

All of the warranty terms as expressed above shall apply in all respects, for the original United States purchaser of a

Mighty Pro

X3™ carpet cleaning machine, who purchases/uses the machine commercially (not in household use), except

that the limited warranty period for the defects in material or workmanship as well as housing parts for commercial use

machines shall be one (1) year.

You can register your Rug Doctor machine at www.rugdoctor.com

Warranty and Product Registration

11

Rug Doctor Oxy-Steam

®

Carpet Cleaner has oxygen

cleaning boosters that lift out embedded dirt,

allergens and bacteria from deep within carpets.

Oxy-Steam

®

is very gentle on carpets and is safe to

use even on wool and wool-blend carpets.

Rug Doctor Oxy-Steam

®

Carpet Cleaner – Green

adds color-safe oxygen cleaning boosters to our

superior, environmentally safe, carpet cleaning

formula. It powers through to break the bonds dirt

and grime can have on carpet. Super-concentrated

for added value!

Rug Doctor Pet Formula Carpet Cleaner with

Bio-Enzymatic technology, eliminates odors,

removes oil and protein stains, dissolves urine

crystals and enhances the removal of allergens.

Our unique formula ingredients help rejuvenate

carpet bers.

Rug Doctor Pet Formula Carpet Cleaner – Green

with Bio-Enzymatic technology, eliminates odors,

removes oil and protein stains, dissolves urine

crystals and enhances the removal of allergens.

Our unique formula ingredients help rejuvenate

carpet bers.

Rug Doctor Spot & Stain Remover removes

stains from coffee, juice, sauces, chocolate syrup,

permanent marker, makeup, oil, mud, grass and

more. It solves nearly every kind of common spill

or stain.

Rug Doctor Spot & Stain Remover – Green solves

nearly every kind of commonly occurring spill or

stain. Use on carpet or upholstery to remove stains

from food and beverages, crayon, grease, mud and

much more! Ultra environmentally safe!

Rug Doctor Urine Eliminator is specially formulated

to remove odors and associated stains from urine,

vomit, feces, blood, perspiration, and other pet and

human-origin stains. Urine Eliminator eliminates

the source of the stain and odor.

Rug Doctor Urine Eliminator – Green destroys urine

and other organic odors and stains. It is especially

effective on carpets, upholstery, mattresses

and even pet beds. Ultra environmentally safe!

Rug Doctor Hi-Trafc Pre-Treatment improves

carpet cleaning results by lifting stubborn, oily soils

found in high-trafc areas. The trigger sprayer

makes it easy to apply.

Rug Doctor Upholstery Cleaner cleans and

brightens upholstery without harming delicate

fabrics or upholstery backing. Upholstery cleaner

keeps furniture, car interiors, RV’s, and more

looking like new.

Rug Doctor Odor Remover with advanced

Bio-Enzymatic technology eliminates the source

of trapped odors resulting from food, smoke,

mildew, animal waste and other foul odors. Use

as a pre-treatment or a stand-alone product.

Now that you have the power of the

professionals, make sure you keep

cleaning like one!

Rug Doctor

Oxy-Steam

®

Carpet Cleaner

Rug Doctor

Oxy-Steam

®

Green Formula

Carpet Cleaner

Rug Doctor

Pet Formula

Carpet Cleaner

Rug Doctor

Pet Formula

Green Formula

Carpet Cleaner

Carpet Cleaners

Rug Doctor

Spot & Stain

Remover

Rug Doctor

Spot & Stain

Remover

Green Formula

Rug Doctor

Urine Eliminator

Rug Doctor

Urine Eliminator

Green Formula

Stain and Spot Removers

Rug Doctor

Hi-Trafc

Pre-Treatment

Rug Doctor

Upholstery

Cleaner

Rug Doctor

Odor Remover

Special Application

Page is loading ...

Rug Doctor 95503 User guide

This manual is also suitable for

Rug Doctor 95503 User guide

in other languages

Related papers