Roline USB3.2 Gen 1 Hub Installation guide

Hello! I'm your chat assistant. I've read the Quick Installation Guide for the Gen 1 4-Hub with Extension Cable. This document provides instructions on how to install the USB 3.2 hub, which features a repeater cable and supports data transfer speeds up to 5Gbit/s. It also includes system requirements and information on how to connect devices. I am ready to answer your questions.
What is the maximum data transfer speed of this device?

Is additional drive required for the hub?

What operating systems are supported?

Features

USB3.2 Gen 1 hub with repeater cable (10m)

USB3.2 Compliant, downwards compatible with USB2.0/1.1

devices

Max. Data transfer speed up to 5Gbit/s.

Plug & Play, no additional drive required.

Connections: 1x USB3.2 Type A Male, 4x USB3.2 Type A

Female.

System Requirements

 Windows

 Mac OS X 10.x or Higher

 Available USB3.0 Port

Installation

1. Connect the USB Type-A Male connector of the

USB3.2 Gen 1 4-Hub with Extension Cable to any

available USB3.0 Port on your computer.

2. Connect the USB Type-A Male connector of your

USB Device to the Female port of the USB3.2

Gen 1 4 Port Hub.

3. Additional power will be required when you

connect USB Devices with high power

requirements. Connect the Power Adapter

(optional, 5V4A) to the wall power outlet, then

plug into the DC Jack socket on the Hub.

4. Daisy-chain connection possible.

Quick Installation Guide