ASRock Rack EPC621D6U-2T16R Installation guide

  • Hello! I am an AI chatbot trained to assist you with the ASRock Rack EPC621D6U-2T16R Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
Guide to SATA Hard Disks
Installation and RAID Conguration
1. Guide to SATA Hard Disks Installation ..............................2
1.1 Serial ATA (SATA) Hard Disks Installation ................2
2. GuidetoRAIDCongurations ...........................................3
2.1 Introduction of RAID .................................................3
2.2 RAIDCongurationPrecautions ..............................6
2.3 InstallingWindows®OSWithRAIDFunctions .........7
2.4 ConguringaRAIDarrayUsingIntelRAIDBIOS ....8
2
1. Guide to SATA Hard Disks Installation
1.1 Serial ATA (SATA) Hard Disks Installation
IntelchipsetsupportsSerialATA(SATA)harddiskswithRAID
functions,includingRAID0,RAID1,RAID5,RAID10andIntel
RapidStorage.PleasereadtheRAIDcongurationsinthis
guidecarefullyaccordingtotheIntelsouthbridgechipsetthat
yourmotherboardadopts.YoumayinstallSATAharddiskson
thismotherboardforinternalstoragedevices.Thissectionwill
guideyouhowtocreateRAIDonSATAports.
3
2. GuidetoRAIDCongurations
2.1 Introduction of RAID
ThismotherboardadoptsIntelsouthbridgechipsetthatinte-
gratesRAIDcontrollersupportingRAID0/RAID1/IntelRapid
Storage/RAID10/RAID5functionwithfourindependentSe-
rialATA(SATA)channels.Thissectionwillintroducethebasic
knowledgeofRAID,andtheguidetocongureRAID0/RAID
1/IntelRapidStorage/RAID10/RAID5settings.
RAID
Theterm“RAID”standsfor“RedundantArrayofIndependent
Disks”,whichisamethodcombiningtwoormoreharddisk
drivesintoonelogicalunit.Foroptimalperformance,please
installidenticaldrivesofthesamemodelandcapacitywhen
creatingaRAIDset.
RAID 0 (Data Striping)
RAID0iscalleddatastripingthatoptimizestwo
identicalharddiskdrivestoreadandwritedata
inparallel,interleavedstacks.Itwillimprovedata
accessandstoragesinceitwilldoublethedata
transferrateofasinglediskalonewhilethetwo
harddisksperformthesameworkasasingle
drivebutatasustaineddatatransferrate.
WARNING!!
AlthoughRAID0functioncanimprovetheaccessperformance,
it does not provide any fault tolerance. Hot-Plug any HDDs of
theRAID0Diskwillcausedatadamageordataloss.
RAID 1 (Data Mirroring)
RAID1iscalleddatamirroringthatcopiesand
maintainsanidenticalimageofdatafromone
drivetoaseconddrive.Itprovidesdataprotection
andincreasesfaulttolerancetotheentiresystem
sincethediskarraymanagementsoftwarewill
directallapplicationstothesurvivingdriveasit
4
Intel Rapid Storage
TheIntelRapidStoragetechnologysupportedallowsyouto
createaRAID0andRAID1setusingonlytwoidenticalhard
diskdrives.TheIntelRapidStoragetechnologycreatestwo
partitionsoneachharddiskdrivetocreateavirtualRAID0
andRAID1sets.Thistechnologyalsoallowsyoutochange
theharddiskdrivepartitionsizewithoutlosinganydata.
RAID 10
RAID10isastripedcongurationwithRAID1segments
whosesegmentsareRAID1arrays.Thiscongurationhasthe
samefaulttoleranceasRAID1,andhasthesameoverhead
forfault-toleranceasmirroringalone.RAID10achieveshigh
input/outputratesbystripingRAID1segments.Insome
instances,aRAID10congurationcansustainmultiplesimul-
taneousdrivefailure.Aminimumoffourharddiskdrivesis
requiredforthissetup.
5
RAID 5
RAID5stripesbothdataandparityinformationacrossthreeor
moreharddiskdrives.AmongtheadvantagesofRAID5con-
gurationincludebetterHDDperformance,faulttolerance,and
higherstoragecapacity.TheRAID5congurationisbestsui-
tedfortransactionprocessing,relationaldatabaseapplications,
enterpriseresourceplanning,andotherbusinesssystems.Use
aminimumofthreeidenticalharddiskdrivesforthissetup.
6
2.2 RAID Congurations Precautions
1. PleaseusetwonewdrivesifyouarecreatingaRAID
0(striping)arrayforperformance.Itisrecommended
tousetwoSATAdrivesofthesamesize.Ifyouuse
twodrivesofdifferentsizes,thesmallercapacityhard
diskwillbethebasestoragesizeforeachdrive.For
example,ifoneharddiskhasan80GBstoragecapa-
cityandtheotherharddiskhas60GB,themaximum
storagecapacityforthe80GB-drivebecomes60GB,
andthetotalstoragecapacityforthisRAID0setis
120GB.
2. Youmayusetwonewdrives,oruseanexistingdrive
andanewdrivetocreateaRAID1(mirroring)array
fordataprotection(thenewdrivemustbeofthe
samesizeorlargerthantheexistingdrive).Ifyou
usetwodrivesofdifferentsizes,thesmallercapacity
harddiskwillbethebasestoragesize.Forexample,
ifoneharddiskhasan80GBstoragecapacityand
theotherharddiskhas60GB,themaximumstorage
capacityfortheRAID1setis60GB.
3. Pleaseverifythestatusofyourharddisksbeforeyou
setupyournewRAIDarray.
WARNING!!
  PleasebackupyourdatarstbeforeyoucreateRAIDfunctions.
  IntheprocessyoucreateRAID,thesystemwillaskifyouwant
  to“ClearDiskData”ornot.Itisrecommendedtoselect“Yes”,
  andthenyourfuturedatabuildingwilloperateunderaclean
  environment.
7
2.3 Installing Windows® OS With RAID Functions
IfyouwanttoinstallWindows®OSonyourSATAHDDswith
RAIDfunctions,pleasefollowtheproceduresbelow.
STEP 1: Set up UEFI.
A.EnterUEFISETUPUTILITYAdvancedscreen
StorageConguration.
 B.Set“SATAModeSelection”to[RAID].
STEP 2: Set RAID conguration.
Pleaserefertop.8-11ofthisdocumentforinstructionsonhow
tosetRAIDconguration.
STEP 3: Install Windows® OS on your system.
8
2.4 Configuring a RAID array Using Intel RAID
BIOS
Reboot your computer. Wait until you see the RAID software
promptingyoutopress<Ctrl+I>.
 Press<Ctrl+I>.Then,theIntelRAIDUtility-Create RAID
Volumewindowappears.
 IntheCreateVolumeMenu,underNameitem,pleasekey-ina
uniquenamewith1-16lettersforyourRAIDvolumethenpress
<Enter>.
9
Use the up or down arrow keys to select your desired RAID
Level.YoumayselectRAID0(Stripe),RAID1(Mirror),RAID
5orRAID10foryourRAIDlevel.Press<Enter>,andthenyou
can select Strip Size.
If you selected RAID 0 (Stripe), use the up or down keys to
selectthestripesizeforyourRAID0arraythenpress<Enter>.
Theavailablevaluesrange from 8KBto128 KB.Thedefault
selection is 128 KB. The strip value should be chosen based
ontheplanneddriveusage.
8/16KB-lowdiskusage
64KB-typicaldiskusage
128KB-performancediskusage
 Afteryousetdiskblocksize,press<Enter>tosetdisk
Capacity.
10
 AftersettingupCapacity,pleasepress<Enter>.
Press<Enter>undertheCreate Volumeitem.Theutility
promptsaconrmationmessageasbelow.
11
 Press<Y>tocompletethesetupofRAID.
Afterthecompletion,youwillseethedetailedinformationabout
theRAIDthatyousetup.
 PleasenotethatyouareonlyallowedtocreateoneRAID
partitionatatimeunderBIOS RAID environment. Ifyouwant
to create an extra RAID partition, please use the RAID utility
underWindowsenvironmenttocongureRAIDfunctionsafter
youinstallOS.
 Ifyouwant todeleteaRAIDvolume,pleaseselecttheoption
Delete RAID Volume,press<Enter>,andthenfollowthe
instructionsonthescreen.
1/11