Made in Viet Nam
email: info@riverside-furniture.com
Components and Hardware List
Page 1 of 2
#64336 Credenza Hutch
#64333 Credenza
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture MUST
BE ASSEMBLED BY TWO PEOPLE on a soft surface such as
a blanket or carpet.
Regency
Home Office
Assembly Instructions
1 pc.4 pcs.
4 pcs.
To Wall Oulet
4 pcs. 2 pcs.
Furniture
Tipping
Restraint Kit
A
A B C D E
Back view
D
Step 2 : Attach the Hutch to the Credenza using the mounting plates and bolts at the back.
F2 pcs.
4mm Allen Key
Allen Head Bolt
Ø1/4 x 3⁄4" Spring Washer
1/4' Flat Washer
1/4" x 19 x 2mm Mending Plate
Step 1 : Remove shipping brace by removing screws as shown. Discard the rail.