User manual
3
MAIN FUNCTIONS
Instructions for charging
Before use the headphone for the first time, please charge it full.
Plug the micro USB cable into micro USB charging port and connect the other end of the cable to either a
computer USB port or to a USB- compatible car or wall charger.
A red LED light will appear to indicate when the headphone is charging.
When charging is complete, the LED light will turn off.
The automatic power off function and power on can’t be possible when charging.
When the battery is low, a voice prompt.
ON/OFF
1. On: Press and hold the power button for 2 seconds until the red and blue light flashes alternately; then it
begins Bluetooth® pairing mode.
2. Off: Press and hold the power button for 2 seconds to turn off.
If you don’t connect Bluetooth® device when the red and blue light flashes, the earphone will auto power
off after 5 minutes.
Bluetooth® pairing
If the unit has never been paired with a Bluetooth® device before, you need to follow the instructions
below to pair the headphone with your Bluetooth® device:
1) Enable Bluetooth® in your device and set it to search for compatible devices.
2) Select “TES227” from the list of found devices.
3) If the pairing is successful, the blue LED is flashing (every 5 seconds).
The headphone will connect automatically, if paired before.
Play/Pause
When the Bluetooth® headphone connects to the device, short press the Power button when the music is
on, the music will be paused. Short press it again to play the music again.
Next/Previous SONG
Long press + button to play the next song and long press - to play previous song .
Increase/ Decrease the volume
Short press + button to increase the volume and short press – to decrease it.
A sound is ringing when adjust to the max voice.