Livoo TES236 User manual

Brand: Livoo

Model: TES236

Type: User manual

User manual

WWW.LIVOO.FR

Reference : TES236

Version : 1.4

Language : English

Bluetooth® compatible

wireless earphones

User manual

Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our

products. We hope that this product will give you complete satisfaction.

This instruction manual is also available on our website www.livoo.fr

PLEASE READ ALL INSTRUCTIONS CAREFULLY

SAFETY INSTRUCTIONS

Never dissemble the Bluetooth® Earbuds in an attempt to make any repairs as this could result in electrical

shock, burns or product failure.

Use extra caution while children are using the Bluetooth® Earphones.

Earbuds and power case are not waterproof or water resistant;

Use extra caution in high temperatures;

Do NOT the device in water or very humid places, such as swimming pools or bathrooms;

Damage, shock, and/or injury can occur if this warning is not heeded properly;

The Bluetooth® Earphones are not covered under warranty when the product has metal rust, surface

spalling and any other natural oxidation.

PACKAGE CONTENTS

• 2 Bluetooth® Earphones

• 1 Charging case

• 1 USB/Micro USB cable

• Instruction manual

SPECIFICATIONS

Power

Built-in Li battery (Headset: 40mAh, powerbank and charging case 3.7V, 2000mAh)

Power input for charging box: DC5V/1A (Max)

USB-A output: DC5V/ 1A (Max)

Technical

Frequency range : 40HZ-18KHZ

Sensitivity Rate :105dB±3dB

Wireless Version: Airoha 5.0

Wireless distance 10m (straight-line)

Speaker Φ6mm /32 Ω

User manual

PRODUCT DESCRIPTIONS

Charging case schematic

Headphone schematic

Button control:

Powered on : Press on the headsets R&L for 2s

Powered off : Press on the headsets R&L for 5s

Pause: short press on the headsets R/L

Play: short press on the headsets R/L

Answer phone call: short press on the headsets R/L

Refuse phone call: Press on the headsets R/L and hold 3s

Previous music: double press on the headset L

Next music: double press the headset R

Enable Siri or google assistant : press on the headsets L /R for three time

Headsets

Handle strap

Power bank+charging case

USB

A output interface

Charging indicator

DC5V charging interface

Charging interface

Red/Blue indicator

Choose the right size for yourself

User manual

Charging the earphones

Before the first use, charge the battery completely.

In order to charge the earphones, you need to use the charging box.

Place each earphone into a slot.

If the box is charged, the earphones will immediately start charging, which is indicated by a red LED light on

the earphone.

If the charging box is not charged, charge the box as per the instructions below.

When the earphones are fully charged, the red LED light will turn off.

Charge the charging box

To charge the charging box, connect the small end of the Micro USB charging cable to the Micro USB port,

with the large USB port into computer’s USB port or an AC adaptor (not included).

A red LED light is flashing, when the charging box is fully charged, the red light stays on.

Note :

The headsets will power off in 5 minutes if no connected with any wireless device.

Please put the earphones back to charging case after using them.

Wireless connected

Take out the earphones from the charging case, power on the two earphones.

The two earphones pair automatically after the indicator light flash. Once finished one earphone indicator

flashes rapid and the other slowly.

Activate your pairing device’s Bluetooth ®. Search for “TES236” and select it to connect.

FAQ

1.L&R headsets can’t auto paired.

In off state, press L&R buttons and hold for 8s until blue & red light on, then loosen, and then powered on

again to pair

2. Phone can’t find the headsets or can’t connect with headsets

Put headsets back to charging case and then take out to connect with wireless device again, or cancel all

wireless connection in your phone and re-open Bluetooth to search and connect.

3. The headsets has interrupt or disconnection from wireless device

1) The straight-line distance between headsets & wireless device is over 10M.

2) There is signal blocking between headsets and wireless device.

4. Charging case can’t charge for headsets

1) Please clean the Charging interface for headsets and charging case

2) Please take out the headsets and put them back again

3) Please charge for the charging case

User manual

EU DECLARATION OF CONFORMITY

DELTA

BP61071

67452 Mundolsheim – France

Herewith declare under our sole responsibility, that the radio equipment

Bluetooth® compatible wireless earphones

TES236 (Frequency range 2402MHz-2480MHz)

Fulfils the essential requirements of the Directive 2014/53/UE

The following standards were applied:

Radio:

EN 300 328 V2.1.1

EMC:

EN 55014-1 :2017

EN 61000-3-2:2014

EN61000-3-3:2013

EN55014-2:2015

Health and Safety:

EN 62368-1:2014+A11:2017

Mundolsheim, 16/12/2019

User manual

Correct Disposal of this product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

The European Directive 2012/19/EU on Waste Facilities Electrical and Electronic (WEEE)

This marking shown on the product or its literature, indicates that it should not be disposed with other household

wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other

types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product or their local authority office, for details of

where and how they can take this item for environmentally safe recycling

• Photo no contractual

• Worried about the quality of his products the manufacturer reserves the right to make modifications without advance

notice

LIVOO

BP 61071

67452 Mundolsheim - FRANCE

Livoo TES236 User manual

Livoo TES236 User manual

Related papers

Other documents