Software 6 Release Notes
Release 6.10.3-1
Westermo Network Technologies AB
November 2, 2023
Contents
1 General Information 3
2 Release Highlights 4
2.1 6.10.3-0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 6.10.3-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Limitations 4
4 Configuration Parameter Changes 4
5 Changed Configuration Parameter Descriptions 5
5.1 MIB Reference: WESTERMO-SW6-MIB . . . . . . . . . . . . . . . . . . . . . . . . 5
2 of 8
2 Release Highlights
2.1 6.10.3-0
• Cellular: Add support for cellular Firmware EM12GPAR01A21M4G_01.200.01.200
• Factory Reset: Prevent false positive of Factory Reset Adapter detection
• 802.1x: Add support for VLAN tagged EAPOL authentication on Ethernet service port
• Wireless: Fix rare temporary RSSI offset after Handoff (802.11n products only)
2.2 6.10.3-1
• CURL: Fix CVE-2023-38545 and CVE-2023-38546
3 Limitations
•
When the device is reconfigured to Mesh with SAE as encryption, the device has to be rebooted
after applying the configuration (802.11n products only)
• Multi-SSID with DFS channels does not work (802.11n products only)
•
It is recommended to operate the wave 1 card (radio1) with a maximum of 60 active clients.
(802.11ac products only)
4 Configuration Parameter Changes
The following configuration items have been added/changed/removed or marked as obsolete:
•cfgSysComment (added)
•cfgHttpTlsCiphers (changed)
•cfgWlanDevShortRetry (changed)
•cfgWlanDevLongRetry (changed)
4 of 8
•cfgWlanWmeCwMin (changed)
•cfgWlanWmeCwMax (changed)
•swCellSignalSinr (changed)
5 Changed Configuration Parameter Descriptions
5.1 MIB Reference: WESTERMO-SW6-MIB
5.1.1 cfgSysComment
System Comment
This parameter has no operational function. A simple comment field to add customised information,
such as configuration version, release notes or other remarks.
Type DisplayString
Range 0 - 255
Access readwrite
OID 1.3.6.1.4.1.16177.1.400.1.1.1.4
5.1.2 cfgHttpTlsCiphers
OpenSSL Cipher and Ciphersuites String for HTTPS server
Specify which OpenSSL ciphers and ciphersuites to use for HTTPS connections.
Please read the user manual and the OpenSSL documentation for a list of available ciphers, cipher-
suites and used syntax.
Up to TLSv1.2, OpenSSL uses ciphers, while with TLSv1.3 ciphersuites are used. The format
for this parameter is as follows: [|], i.e. the pipe (‘|’) sign is used to separate the ciphers from the
ciphersuites.
If ciphers or ciphersuites is left empty, no restrictions are applied and all of the related built-ins are
available. If ciphers is set with the special string ‘disable’, the support for TLSv1.2 and below is
disabled, while ‘disable’ given as cyphersuites disables TLSv1.3.
Set to ‘none’ to disable restriction.
5 of 8
Examples:
•ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384
limit TLSv1.2 to the selected two ciphers, leave TLSv1.3 ciphersuites all enabled
•DHE-RSA-AES256-GCM-SHA384|TLS_AES_256_GCM_SHA384
limit TLSv1.2 to one cipher and TLSv1.3 to one ciphersuite
•DHE-RSA-AES256-GCM-SHA384|disable
limit TLSv1.2 to one cipher and disable TLSv1.3 support
•disable|TLS_AES_256_GCM_SHA384
disable TLSv1.2 support and limit TLSv1.3 to one ciphersuite
•|TLS_AES_256_GCM_SHA384
leave all TLSv1.2 enabled, limit TLSv1.3 to one ciphersuite
•|disable
leave all TLSv1.2 ciphers enabled, disable TLSv1.3 support
•disable|
disable TLSv1.2 support, leave all TLSv1.3 ciphersuites enabled
•none
no restrictions for TLSv1.2 and TLSv1.3
Type DisplayString
Range 0 - 255
Access readwrite
OID 1.3.6.1.4.1.16177.1.400.1.1.15.14
5.1.3 cfgWlanDevShortRetry
RTS Transmission Retries
This parameter only applies to legacy bitrates (802.11b/g/a). To affect the retry behaviour of 802.11n
rates see cfgWlanDevQmrrString.
6 of 8
Number of times the transmission of the RTS frame will be retried if there is no CTS received from
the AP. This is in addition to the initial RTS attempt.
Applies to AP and STA. 802.11n products only.
Range 1 - 15
Access readwrite
OID 1.3.6.1.4.1.16177.1.400.1.1.3.1.1.13
5.1.4 cfgWlanDevLongRetry
Data Frame Tries
This parameter only applies to legacy bitrates (802.11b/g/a). To affect the retry behaviour of 802.11n
rates see cfgWlanDevQmrrString.
Number of times the unicast data frames will be retried if there is no ACK from the receiver. This
value includes the initial attempt.
Applies to AP and STA. 802.11n products only.
Range 1 - 15
Access readwrite
OID 1.3.6.1.4.1.16177.1.400.1.1.3.1.1.14
5.1.5 cfgWlanWmeCwMin
Contention Window Minimum in Exponential Form
Is used on STAs connected to this AP: Real value = (2ˆn)-1
Applies to AP. 802.11n products only.
Range 1 - 10
Access readwrite
OID 1.3.6.1.4.1.16177.1.400.1.1.3.5.1.4
5.1.6 cfgWlanWmeCwMax
Contention Window Maximum in Exponential Form
7 of 8
Is used on STAs connected to this AP: Real value = (2ˆn)-1
Applies to AP. 802.11n products only.
Range 1 - 10
Access readwrite
OID 1.3.6.1.4.1.16177.1.400.1.1.3.5.1.5
5.1.7 swCellSignalSinr
Signal-To-Interference-Plus-Noise Ratio
This parameter is only active when swCellSignalType is of type lte(1).
The signal-to-interference-plus-noise ratio (SINR) in dB is calculated from the value vof this entry
using the following equation:
SINR = (v * 2) - 20
Examples:
•0: SINR = -20dB
•10: SINR = 0dB
•25: SINR = 30dB
Applies to cellular products only.
Type Integer32
Access readonly
OID 1.3.6.1.4.1.16177.1.400.1.6.50.1.1.16
8 of 8
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Westermo Ibex-RT-220 Firmware
- Type
- Firmware
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Westermo Ibex-RT-370 User guide
-
-
-
-
-
Westermo RT-220-LV User guide
-
-
-
-
Other documents
-
Kofax Communication Server 10.3.0 Owner's manual
-
Broadcom Brocade Fabric OS FIPS Cryptographic Module 8.2.x User guide
-
Perle IOLAN SCR1618 RDAC Console Server User guide
-
Perle IRG5000 LTE User guide
-
Planet UPOE-800G User manual
-
Multitech MTR-H5-B07 User guide
-
-
-
Xerox C410 User guide
-
Multitech MTR-H6-B18 User guide