Addonics Technologies SESU3CS User manual

Type
User manual

This manual is also suitable for

Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
www.addonics.com
T E C H N O L O G I E S
Sapphire eSATA/USB 3.0 Drive Enclosure
(SESCS, SESU3CS)
User Guide
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Unpacking and Overview
SESCS, SESU3CS
Front View
Back View
Inside View
1
4
1. On/Off Switch
2. Cooling Fan
3. eSATA Port
4. Power Connector
1. 4P Molex Power Connector
2.
SATA-eSATA Bridge
3. Power Board
1
2
2 3
3
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
eSATA cable eSATA to USB 3.0 Adapter (Model SESU3CS)
Power Cable
1. Loosen the two cover screws on the back of the unit found on the left and
right edges. Remove the rear cover, then slide the top cover off.
2. Remove the front plate and replace with a 5.25" drive, or a 2.5" or 3.5"
device mounted in a 5.25" mounting bracket using the 5.25" drive
mounting holes.
3. Reassemble the unit.
4. Connect the power supply from an AC outlet to the back of the unit.
5. Connect an eSATA host to the unit and turn it on. For Model AESU3CS,
optionally attach the eSATA-USB 3.0 Adapter to connect the unit to USB
host.
Installation
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Addonics Technologies SESU3CS User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI