1
MS904500TX
Liam
Media Console
Assembly
Instructions
For assistance with assembly
contact:
Southern Enterprises
Inc.
Customer Service 1-800-633-5096
www.seidal.com
2
MS904500TX Liam
Media Console
Assembly
Instructions
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer
.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below. You may receive extra hardware with your unit.
※
MAX. LOADING CAPACITY IS 175 LBS FOR TOP PANEL, 20 LBS PER SHELF, 10 LBS
FOR DRAWER.
1.
Allen Wrench
M4
4.
Screw
8x3.5x19mm
7.
Round Head
Screw
6x13x12mm
Quantity
Of 1
Quantity
Of 6
Quantity
Of 22
2.
Bolt
∅
1/4mmx15mm
5.
Wood Dowel
∅
6mmx25mm
8.
Door Handle
Quantity
Of 8
Quantity
Of 12
Quantity
Of 3
3.
Cam Lock
6.
Steel Leg
Quantity
Of 8
Quantity
Of 2
9.
Screw
3x14mm
Quantity
Of 8
10.
Hinge
Quantity
Of 4
11.
Cam Bolt
Quantity
Of 8
Care and Cleaning Instructions:
Before using, wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Tool required: Phillips screw driver
(Not Included)
3
CAM
LOCK
DOWEL
MS904500TX
Liam
Media Console
For assistance with assembly
contact:
Southern Enterprises
Inc.
Customer Service 1-800-633-5096
www.seidal.com
PARTS LIST:
NO DESCRIPTION QTY
NO DESCRIPTION QTY
A
TOP PANEL
1 J
CENTER BACK PANEL
1
B
BOTTOM PANEL
1 K
DRAWER FRONT PANEL
1
C
LEFT PANEL
1
L
DRAWER LEFT PANEL
1
D
RIGHT PANEL
1 M
DRAWER RIGHT PANEL
1
E
RIGHT CENTER DIVIDER
1 N
DRAWER BOTTOM PANEL
1
F
LEFT DOOR PANEL
1 O
DRAWER BACK PANEL
1
G
RIGHT DOOR PANEL
1 P
FIXED SHELF
1
H
LEFT BACK PANEL
1 Q
LEFT CENTER DIVIDER
1
I
RIGHT BACK PANEL
1
CAM LOCK INSTRUCTION
CAM LOCK INSTRUCTION:
PANEL I
THIS ITEM IS ASSEMBLED WITH CAM LOCK SET.
--SCREW CAM BOLT INTO PANEL II.
--INSERT CAM LOCK INTO PRE-DRILLED HOLE IN PANEL I, AND
CAM LOCK
--ROTATE CAM LOCK UNTIL ARROW IS IN LINE WITH HOLE ON PANEL EDGE.
--ALIGN CAM BOLT TO CAM LOCK HOLE ON PANEL I, AND PRESS PANELS I &
II
T
OGETHER.
--LOCK PANELS TOGETHER BY TURNING CAM LOCK CLOCKWISE UNTIL
TIGHT.
PANEL II
CAM BOLT
NOTE :
FOLLOW INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE
FAST, EASY AND CORRECT ASSEMBLY. HOUSE HOLD GLUE SUGGESTED FOR WOOD DOWEL.(eg.
ELMERS GLUE, NOT PROVIDED).SOLID ARROW MARK POINTS AT FRONT SIDE OR UP DIRECTION.
PHILLIP SCREW DRIVER IS REQUIRED(NOT PROVIDED).TWO PERSONS ARE RECOMMENDED TO
ASSEMBLE THIS ITEM.
4
1
MS904500TX
Liam
Media Console
Assembly Instructions
1
2
Step 1:
Attach the Steel Legs (6)
to Bottom Panel (B) using
6
Bolts(2). Tighten Bolts (2)
1
wit h Allen Wrench (1) as
shown in Figure
1.
2
6
B
B
Figure 1
Customer Service 1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Pkwy Ste: 200
Coppell, Texas 75019
5
MS904500TX
Liam
Media Console
Assembly Instructions
Step 1:
Attach Right Center Divider
(E) and Left Center Divider
(Q) to Fixed Shelf (P) using
E
Wood Dowels (5) as shown
in Figure
2.
5
E
5
P
P
Q
Q
Figure 2
6
5
MS904500TX
Liam
Media Console
Assembly Instructions
Step 3
Step 1:
E
Attach Panels (E), (Q) and
P
(P) from the assembled unit
Q
in Figure 2 to Bottom Panel
(B) using Wood Dowels (5)
as shown in Figure 3.
Step 2:
B
Switch the locks to the on
position once the pegs
have been inserted into the
corresponding holes.
ON
OFF
Figure 3
7
Step 4
MS904500TX
Liam
Media Console
Assembly Instructions
ON
OFF
Step 1:
Attach Left Panel (C) and
Right Panel (D) to the
assemble unit from Figure 3
using Wood Dowels (5) as
D
shown in Figure 4.
Step 2:
E
Switch the locks to the on
position.
P
C
Q
5
5
Figure 4
8
Step 5
MS904500TX
Liam
Media Console
Assembly Instructions
ON
OFF
Step 1:
Assemble the top panel (A)
to the assembled unit using
wood dowels (5) as shown
in figure 5.
Step 2:
A
Switch the locks to the on
position as shown in Figure
D
5.
E
P
Q
B
C
5
Figure 5
9
O
MS904500TX
Liam
Media Console
Assembly Instructions
3
Step 1:
11
I ns er t Cam Loc k s ( 3) int o
Drawer Back Panel (O). Screw
Cam Bolts (11) into Left and
Right Drawer Panel (M/L). Insert
attached Cam Bolts (11) into
corresponding holes on Drawer
M
Back Panel (O), and tighten Cam
O
Locks(3).
M
L
Step 2:
L
N
Insert Drawer Bottom panel (N)
11
into the groove of the assembled
drawer.
Step 3:
Insert Cam Locks (3) into Panels
K
(L/M). Attach Door Handle (8) to
the drawer Front Panel (K) with
3
4
Screws (4).
Step 4:
Figure 6
Attach Drawer Front Panel (K)
8
to
the assembled drawer by
inserting the attached Cam Bolts
(11) into the corresponding holes
and tighten Cam Locks(3) to
secure.
10
MS904500TX
Liam
Media Console
Assembly Instructions
Step 1:
Attach Back Panels (H)(J)
and (I) to the assembled unit
using Screws (7) as shown
in figure 7.
I
J
H
7
Figure 7
11
MS904500TX
Liam
Media Console
Assembly Instructions
Step 1:
Attach Hinges (10) to the
Left Door Panel (F) and
Right Door Panel (G) using
G
Screws (9).
4
F
F
F
8
G
9
10
G
Figure 8
Step 2:
Attach Door Handles (8) to
the Door Panels with screws
(4) .
Step 3:
Lo ose n the re ar screws
locat ed on
t
he hinges
attached to Panels (C/D)
. Align the hinges on the
doors to the pre-installed
hinges on Panels(C/D).
Tighten the rear screws on
the pre-installed hinges on
panels(C/D).
note: Adjust the front screw
on the door hinge clockwise
or counter clockwise.
12
MS904500TX
Liam
Media Console
Assembly Instructions
Step 1:
Insert the drawer into the
unit by aligning the glides on
the drawer to the glides on
the unit and push in.
Figure 9
13
CAUTION
The top shelf is intended for a flat screen television with a maximum overall
width of 50” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each shelf should not be loaded with more than 20 lb. Each drawer should
not be loaded with more than 10 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing
possible injury.
This unit contains a permanent warning sticker located on back panel.
Do not allow children under 16 years to move the cart.
Model: MS904500TX
Liam Media Console
Southern Enterprises,
Inc
600 Freeport Parkway
,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 10/15/2015
14
Parts
Replacement Form
Customer Information
Name Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be
honored within this time frame. Parts will not be available for items arriving fully assembled. We do
not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under
no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-
Fri Central time if you have product issues or email us at service@
hollyandmartin.com
. Please ask
for customer service representative for issues involving damages or replacement parts. Please ask for
technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service
1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
/
