INSTALLATION GUIDE
ENGLISH
Code: EWMK304025
Name: Metallic enclosure KEY 300x400x250 IP55
IM EWMK304025
Edition: 1st from 04.01.2013
Supersedes: ------------------------
1. Intended use:
The EWMK304025 enclosure is intended for mounting electrical power equipment in electrotechnical branches that
require IP55 protection grade (protection grade IP55: ‘5’ – protection against dust, ‘5’ – protection against water jets).
A mounting plate is included to the enclosure.
2. Specifications:
SPECIFICATIONS
External dimensions.
W=300, H=400, D=250 [mm, +/-2]
Mounting plate
dimensions.
W=254 H=325, distance: mounting plate-door D=197 [mm, +/-2]
Net/gross weight.
8,8 / 8,68 [kg]
Operating conditions.
II environmental class
Materials.
- enclosure: steel 1,2mm,
- colour: RAL 7035(grey, structural)
- mounting plate: galvanized sheet S2,0mm
- high-quality polyurethane gasket
Use.
inside / surface-mounted / IP55
Closing.
mechanical lock 1pc. - 1 key included
Additional accessorie.
- RAPU – earthing wire 3,3mm
2
-30cm
- to keep tightness, buy the following isolation cable glands:
ML146 (M12x1.25), ML147 (M16X1.5), ML145 (M20x1.5)
The enclosure in its standard version does not include an earthing wire or
cable glands
Notes.
- changeable door – right or left
- mounted with wall holders (included)
The enclosure does not feature embossing for cable glands
Declarations.
RoHS
3. Dimensions:
4. Construction:
1) Enclosure
2) Door
3) Mounting plate
4) Mounting plate, to enter cables (cable glands required, available as accessories)
5) Mechanical lock 1 pc.
6) Wall holder
7) Flat washer ø8
8) Nut M8
9) Spring washer ø8
10) Screw M8*20
5. Accessories:
Caution! The enclosure does not include any cable glands in its standard version
RAPU ML146
ML147
ML145
Earthing wire 3,3mm
2
Isolation
cable gland M12x1,25 Isolation cable gland M16x1,5
Isolation cable gland M20x1,5
6. Available models:
- EWMK253015 – 250x300x150 IP55
- EWMK304025 – 300x400x250 IP55
- EWMK405020 – 400x500x200 IP55
- EWMK406030 – 400x600x300 IP55
- EWMK507030 – 500x700x300 IP55
- EWMK606030 – 600x600x300 IP55
- EWMK608035 – 600x800x350 IP55
MANUFACTURER
Pulsar K.Bogusz Sp.j.
Siedlec 150,
32-744 Łapczyca, Poland
Tel. (00 48) 14-610-19-40, Fax. (00 48) 14-610-19-50
e-mail: sales@pulsar.pl
www.pulsar.pl , www.zasilacze.pl
WARRANTY
12 months from the date of purchase.
THE WARRANTY IS VALID only upon presentation of the item’s proof of purchase.
/
