INSTALLATION GUIDE

ENGLISH

Code: EWMK406030

Name: Metallic enclosure KEY 400x600x300 IP55

IM EWMK406030

The EWMK406030 enclosure is intended for mounting electrical power equipment in electrotechnical branches that

require IP55 protection grade (protection grade IP55: ‘5’ – protection against dust, ‘5’ – protection against water jets).

A mounting plate is included to the enclosure.

2. Specifications:

- to keep tightness, buy the following isolation cable glands:

ML146 (M12x1.25), ML147 (M16X1.5), ML145 (M20x1.5)

The enclosure in its standard version does not include an earthing wire or

cable glands

- mounted with wall holders (included)

4. Construction:

3) Mounting plate

4) Mounting plate, to enter cables (cable glands required, available as accessories)

5) Mechanical lock 2 pc.

6) Wall holder

7) Flat washer ø8

8) Nut M8

9) Spring washer ø8

10) Screw M8*20

5. Accessories:

Caution! The enclosure does not include any cable glands in its standard version

RAPU-E ML146

6. Available models:

- EWMK253015 – 250x300x150 IP55

- EWMK304025 – 300x400x250 IP55

- EWMK405020 – 400x500x200 IP55

- EWMK406030 – 400x600x300 IP55

- EWMK507030 – 500x700x300 IP55

- EWMK606030 – 600x600x300 IP55