INSTALLATION GUIDE
ENGLISH
Code: EWMK507030
Name: Metallic enclosure KEY 500x700x300 IP55
IM EWMK507030
Edition: 1st from 04.01.2013
Supersedes: ------------------------
1. Intended use:
The EWMK507030 enclosure is intended for mounting electrical power equipment in electrotechnical branches that
require IP55 protection grade (protection grade IP55: ‘5’ – protection against dust, ‘5’ – protection against water jets).
A mounting plate is included to the enclosure.
2. Specifications:
SPECIFICATIONS
External dimensions.
W=500 H=700 D=300 [mm, +/-2]
Mounting plate dimensions.
W=454 H=625, distance: mounting plate-door D=257 [mm, +/-2]
Net/gross weight.
19/ 20,8 [kg]
Operating conditions.
II environmental class
Materials.
- enclosure: steel 1,2mm,
- colour: RAL 7035(grey, structural)
- mounting plate: galvanized sheet 2,0mm
- high-quality polyurethane gasket
Use.
inside / surface-mounted / IP55
Closing.
mechanical lock 2pc. - 1 key included
Additional accessorie.:
- RAPU – earthing wire 3,3mm
2
-30cm
- to keep tightness, buy the following isolation cable glands:
ML146 (M12x1.25), ML147 (M16X1.5), ML145 (M20x1.5)
The enclosure in its standard version does not include an earthing wire or
cable glands
Notes.
- changeable door – right or left
- mounted with wall holders (included)
The enclosure does not feature embossing for cable glands
Declarations.
RoHS
3. Dimensions: