Rev-A-Shelf 4DPBG-2421-1 Operating instructions

Type
Operating instructions

This manual is also suitable for

1) Measure inside of drawer.
2) Transfer measurements to peg
board.
3) Trim board to desired dimensions
using a table saw. (Note: Be sure vinyl
side is face up before cutting.)
(Note: Drawer Pegs and Accessories Sold Separately.)
Peg Board
Installation Instructions
I-4DPBG-0411
12400 Earl Jones Way
Louisville, KY 40299
www.rev-a-shelf.com • 1-800-626-1126
1) Measure inside of drawer.
2) Transfer measurements to peg
board.
3) Trim board to desired dimensions
using a table saw. (Note: Be sure vinyl
side is face up before cutting.)
(Note: Drawer Pegs and Accessories Sold Separately.)
Peg Board
Installation Instructions
I-4DPBG-0411
12400 Earl Jones Way
Louisville, KY 40299
www.rev-a-shelf.com • 1-800-626-1126
  • Page 1 1
  • Page 2 2

Rev-A-Shelf 4DPBG-2421-1 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI