IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
CONNECTING THE WIRES
4.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refertothewiringdiagramandattachthexture’s
wirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundtoGround.Twisttheends
ofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.
5.Ifthereisnohousegroundwirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrap
andwrapthexture’sgroundwirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewires
andintothemountingbracket/mountingstrap.Tuckthewiresintothejunctionbox.
FINISHING THE INSTALLATION
6.Placethexture’scanopy(F)overmountingscrews(A)sothattheyprotrudethroughtheholesincanopy(F).
7.Threaddeconuts(G)ontomountingscrews(A).
8.Installlightbulbs(notincluded)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended
wattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
For Customer Service, please
contact the place of purchase.
AssemblyInstructions:7856-SF (Ferris)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See
the important notes above. Remove the old xture
from the ceiling, including the old mounting strap.
1.Takethemountingstrapassemblyfromtheparts
bag.Mountingstrap(B)containsthreadedholes.
Twoofmountingscrews(A)shouldbeattachedto
mountingstrap(B).Youmayneedtotightennuts(C)
thatholdthesescrewsinplace.
2.Pullthehousewiresthroughthecenterof
mountingstrap(B).Placemountingstrap(B)over
thejunctionboxsothatmountingscrews(A)are
horizontal,andinalignmentwiththeholelocations
onthexture’scanopy(F).
3.Securemountingstrap(B)tothejunctionbox
withmountingscrews(D)andascrewdriver.Tighten
thescrewssecurely.
A
GND
B
C
D
E
F
G