Wacker Neuson DPP33 is a Dual Pump Pack, designed as an accessory to work with a variety of hydronic surface heaters including the Wacker Neuson PureHeat 330 and 660 surface heaters. The DPP33 can add two additional hose loops for the heater, up to 600 ft of hose per loop. With the additional Quick Connect fittings and the 3 ft leader hose, the DPP33 is ready to increase the versatility of surface heater. The DPP33 is powered through the auxiliary control panel or on-board duplex receptacle.
Wacker Neuson DPP33 is a Dual Pump Pack, designed as an accessory to work with a variety of hydronic surface heaters including the Wacker Neuson PureHeat 330 and 660 surface heaters. The DPP33 can add two additional hose loops for the heater, up to 600 ft of hose per loop. With the additional Quick Connect fittings and the 3 ft leader hose, the DPP33 is ready to increase the versatility of surface heater. The DPP33 is powered through the auxiliary control panel or on-board duplex receptacle.
Wacker Neuson DPP33 is a Dual Pump Pack, designed as an accessory to work with a variety of hydronic surface heaters including the Wacker Neuson PureHeat 330 and 660 surface heaters. The DPP33 can add two additional hose loops for the heater, up to 600 ft of hose per loop. With the additional Quick Connect fittings and the 3 ft leader hose, the DPP33 is ready to increase the versatility of surface heater. The DPP33 is powered through the auxiliary control panel or on-board duplex receptacle.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI