Kichler Lighting 42955NI User manual

Type
User manual

This manual is also suitable for

Kichler Lighting 42955NI

The Kichler Lighting 42955NI is a versatile and stylish lighting fixture that can be used in a variety of applications. With its adjustable height and multiple light settings, it's perfect for illuminating any space.

The 42955NI features a sturdy metal construction with a brushed nickel finish. It has a classic design that will complement any décor. The fixture uses two 60-watt bulbs (not included) that provide ample lighting.

The 42955NI is easy to install and can be mounted on a ceiling or wall. It comes with all the necessary hardware for installation.

Here are some of the features and benefits of the Kichler Lighting 42955NI:

Kichler Lighting 42955NI

The Kichler Lighting 42955NI is a versatile and stylish lighting fixture that can be used in a variety of applications. With its adjustable height and multiple light settings, it's perfect for illuminating any space.

The 42955NI features a sturdy metal construction with a brushed nickel finish. It has a classic design that will complement any décor. The fixture uses two 60-watt bulbs (not included) that provide ample lighting.

The 42955NI is easy to install and can be mounted on a ceiling or wall. It comes with all the necessary hardware for installation.

Here are some of the features and benefits of the Kichler Lighting 42955NI:

IS-42954-US
Were here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
1) Take threaded pipe[A] from parts bag and screw on two
(2) hexnuts[C] as shown.
2) Screw threaded pipe into mounng strap[B]. Mounng
strap must be posioned with extruded thread faced into
outlet box[D]. Threaded pipe must protrude out the back
of mounng strap. Screw third hexnut[L] onto end of
threaded pipe protruding from back of mounng strap.
3) Connect mounng strap[B] to outlet box using the strap
mounng screws[E].
4) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
5) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
6) Push xture to ceiling carefully passing threaded pipe
with hole in canopy[G]. Make sure all wires are inside
canopy and do not get pinched between wall and canopy
of xture.
7) Thread lockup knob[F] onto threaded pipe and ghten
to secure xture to the ceiling.
8) Insert the clear bushings[H] into the glass panels, four (4)
per glass.
9) Raise the side glass[I] up to the holding brackets and
using the studded cylinders[J] put through the hole in
the glass and secure into place with the cylinder nuts[K].
Repeat four mes per glass panel as shown.
10) Install the recommended bulbs (not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons
[A] Threaded
Pipe
[B] Mounting
Strap
[C] Hexnuts
[D] Outlet Box
[E] Strap
Mounting
Screws
[F] Lockup Knob
[G] Canopy
[H] Clear
Bushings
[I] Side Glass
[J] Studded
Cylinder
[K] Cylinder Nuts
[L] Hexnut
D
B
E
A
L
F
G
I
J
K
H
C
IS-42954-CB
Were here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
1) Take threaded pipe[A] from parts bag and screw on two
(2) hexnuts[C] as shown.
2) Screw threaded pipe into mounng strap[B]. Mounng
strap must be posioned with extruded thread faced into
outlet box[D]. Threaded pipe must protrude out the back
of mounng strap. Screw third hexnut[L] onto end of
threaded pipe protruding from back of mounng strap.
3) Connect mounng strap[B] to outlet box using the strap
mounng screws[E].
4) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
5) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
6) Push xture to ceiling carefully passing threaded pipe
with hole in canopy[G]. Make sure all wires are inside
canopy and do not get pinched between wall and canopy
of xture.
7) Thread lockup knob[F] onto threaded pipe and ghten
to secure xture to the ceiling.
8) Insert the clear bushings[H] into the glass panels, four (4)
per glass.
9) Raise the side glass[I] up to the holding brackets and
using the studded cylinders[J] put through the hole in
the glass and secure into place with the cylinder nuts[K].
Repeat four mes per glass panel as shown.
10) Install the recommended bulbs (not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons
[A] Threaded
Pipe
[B] Mounting
Strap
[C] Hexnuts
[D] Outlet Box
[E] Strap
Mounting
Screws
[F] Lockup Knob
[G] Canopy
[H] Clear
Bushings
[I] Side Glass
[J] Studded
Cylinder
[K] Cylinder Nuts
[L] Hexnut
D
B
E
A
L
F
G
I
J
K
H
C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Kichler Lighting 42955NI User manual

Type
User manual
This manual is also suitable for

Kichler Lighting 42955NI

The Kichler Lighting 42955NI is a versatile and stylish lighting fixture that can be used in a variety of applications. With its adjustable height and multiple light settings, it's perfect for illuminating any space.

The 42955NI features a sturdy metal construction with a brushed nickel finish. It has a classic design that will complement any décor. The fixture uses two 60-watt bulbs (not included) that provide ample lighting.

The 42955NI is easy to install and can be mounted on a ceiling or wall. It comes with all the necessary hardware for installation.

Here are some of the features and benefits of the Kichler Lighting 42955NI:

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI