Watchguard XTM 2 Series (XTM 21-23) Hardware Guide

Brand: Watchguard

Model: XTM 2 Series (XTM 21-23)

Type: Hardware Guide

WatchGuard

XTM 2 Series

Hardware Guide

XTM 21, 21-W, 22, 22-W, 23, 23-W

ii WatchGuard XTM 2 Series

ADDRESS

505 Fifth Avenue South

Suite 500

Seattle, WA 98104

SUPPORT

www.watchguard.com/support

U.S. and Canada +877.232.3531

All Other Countries +1.206.521.3575

SALES

U.S. and Canada +1.800.734.9905

All Other Countries +1.206.613.0895

ABOUT WATCHGUARD

WatchGuard offers affordable, all-in-one network and content security solutions that

provide defense-in-depth and help meet regulatory compliance requirements. The

WatchGuard XTM line combines firewall, VPN, GAV, IPS, spam blocking and URL

filtering to protect your network from spam, viruses, malware, and intrusions. The new

XCS line offers email and web content security combined with data loss prevention.

WatchGuard extensible solutions scale to offer right-sized security ranging from small

businesses to enterprises with 10,000+ employees. WatchGuard builds simple, reliable,

and robust security appliances featuring fast implementation and comprehensive

management and reporting tools. Enterprises throughout the world rely on our

signature red boxes to maximize security without sacrificing efficiency and

productivity.

For more information, please call 206.613.6600 or visit www.watchguard.com

WatchGuard, the WatchGuard logo, Firebox, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use”

portion of the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard

Technologies, Inc. and/or it’s subsidiaries in the United States and/or other countries. All other trademarks are the property

of their respective owners.

Printed in the United States of America.

Part Number: 275-3312-002

Revised: December 1, 2011

U.S. Patent Nos. 6,493,752; 6,597,661; D473,879. Other Patents Pending.

Notice to Users

Information in this guide is subject to change without notice. Updates to this guide are posted at:

http://www.watchguard.com/help/documentation/hardware.asp

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express

written permission of WatchGuard Technologies, Inc.

Complete copyright, trademark, patent, and licensing information can be

found in the Copyright and Licensing Guide. You can find this document

online at: http://www.watchguard.com/help/documentation/

Hardware Guide 1

Hardware Specifications

WatchGuard® XTM security appliances deliver unparalleled unified threat management, superior

performance, ease of use, and value for your small organization or branch office. Our security subscriptions

give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-based exploits, and

blended threats. From firewall and VPN protection to secure remote access, WatchGuard XTM devices support

a broad range of network environments.

This guide introduces the XTM 2 Series, a series of RoHS-compliant (lead-free) hardware products offered by

WatchGuard.

The WatchGuard® XTM 2 Series is a network security device for small organizations and branch offices.

The XTM 2 Series product line includes:

 WatchGuard XTM 2 Series

 WatchGuard XTM 2 Series Wireless

You can upgrade some XTM 2 Series or XTM 2 Series wireless devices to a higher model in the XTM 2 Series

line for more capacity and performance with a simple software license key.

Note

This Hardware Guide applies to XTM 2 Series devices with model numbers XTM 21, 22, 23, 21-W,

22-W, and 23-W . If your device has a different model number, your hardware is described in the

XTM 2 Series Hardware Guide that applies to that model.

Fireware XTM OS

The XTM 2 Series devices support WatchGuard’s next generation UTM OS—Fireware® XTM. Each XTM 2 Series

device includes Fireware XTM and delivers exceptional protection against today's sophisticated threats to

make sure that your business stays connected. For more information on the features of Fireware XTM OS, see

the current Fireware XTM WatchGuard System Manager Help or Fireware XTM Web UI Help.

2 WatchGuard XTM 2 Series

Hardware Specifications

Package Contents

 CD-ROM with this Hardware Guide

 XTM 2 Series appliance

 Quick Start Guide

 Hardware warranty card

 AC adapter (12V/2A) with international plug kit

 Power cable clip, to attach to the cable and connect to the device. This decreases the tension on the

power cable.

 1 straight-through Ethernet cable

 1 wall mount plate (wireless models only)

 Three antennas (wireless models only)

Hardware Description

Hardware Specifications

Interface Specifications

XTM 21, 22, 23 XTM 21-W, 22-W, 23-W Wireless models

Processor 667 MHz Single Core 667 MHz Single Core

Memory: Flash 256 MB 256 MB

Memory: RAM 256 MB 256 MB

Power supply 12V/2A 12V/2A

Dimensions D = 156mm (6.13”)

W = 163mm (7.4”)

H = 32mm (1.25”)

D =203mm (8.0”)

W = 273mm (10.75”)

H = 32mm (1.25”)

Antenna height = 127mm (5.0”)

Weight 1.3 U.S. pounds 1.55 U.S. pounds (with antennas)

Network interfaces

• 3x GbE Copper RJ45, 1000Base-T, 100Base-TX,

or 10 Base-T (10/ 100/1000Mbps)

• 3x 10/100 Mbps

I/O interfaces

•2 USB

Hardware Guide 3

Hardware Specifications

Front View

The front panel of the device.

Fail Over

The Fail Over indicator is lit when there is a WAN failover from the primary external interface to the

backup interface. After the external interface connection fails back to the primary external interface,

the indicator is not lit.

WAP

The WAP indicator is lit when the XTM 2 Series wireless device is activated as a wireless access point

or as a wireless client.

Network interface status indicators

The status indicators for the six network interfaces are labeled 5, 4, 3, 2, 1, 0. There are two status

indicators for each interface.

Status

The Status indicator shows when there is a management connection to the device. The Status

indicator is lit for 30 seconds after you connect to the device with the Fireware XTM Web UI or the

command line interface. It is also lit when the device is polled by WatchGuard System Manager.

Mode

The Mode indicator shows the status of the external network connection. If the device can connect

to the external network and send traffic, the indicator is green. The indicator flashes if the device

cannot connect to the external network and send traffic.

Attn

The Attn indicator is lit when you start the device with the Reset button pressed. For more

information, see “Restore Factory Default Settings” on page 7.

Power ( )

The power indicator is lit when the device is on.

Indicator Indicator color Interface Status

Link Green Power on, connection established

Not lit Power off, no connections

Blinks (speed of blink increases as

the data flow increases)

Data sent and received

100/1000 Not lit Link speed: 10 Mbps

Green Link speed: 100 Mbps

Amber Link speed: 1000 Mbps

4 WatchGuard XTM 2 Series

Hardware Specifications

Rear View

Rear view of the device.

Network interfaces

The interfaces have standard RJ45 connectors and are labeled 0, 1, 2, 3, 4, 5.

 Interfaces 0, 1, and 2 — support link speeds of 10 or 100 Mpbs.

 Interfaces 3, 4, and 5 — support link speeds of 10, 100, or 1000 Mbps.

Antenna (wireless models only)

The XTM 2 Series Wireless device has a wireless antenna to the right of the network interfaces.

Power input

A 12V/2A power supply is included with your device. Connect the AC adapter to the device and to a

power source. The power supply tip is plus (+) polarity. Use only the supplied AC power adapter.

Reset button

To reset the device, use the procedure in “Restore Factory Default Settings” on page 7.

USB interfaces

Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.

For more information about USB functions, see current Fireware XTM WatchGuard System Manager

Help or Fireware XTM Web UI Help.

Side Panels

Computer lock slot

The two side panels of the XTM 2 Series have a slot for a computer lock.

Antennas (wireless models only)

The two side panels of the XTM 2 Series Wireless have wireless antennas.

Wall mounting plate (wireless models only)

The wall mounting plate enables you to put the device in a good location to increase the range.

Hardware Guide 5

Hardware Specifications

AC Power Adapter

The AC power adapter supplies power for the XTM 2 Series device. You must use the correct plug for the AC

power adapter for the power source used in your country.

The international plug kit includes four plugs: Q-NA (North America), Q-UK (United Kingdom), Q-EU (European

Union), and Q-SAA (Asia).

Remove the plug from the AC power adapter

If the plug installed in the AC power adapter does not match your power source:

1. Use your thumb or finger to press down the locking key on the AC power adapter.

2. Hold the bottom of the plug.

3. Pull up from the bottom of the plug to remove it from the AC power adapter.

Connect the plug to the AC power adapter

To install a different plug in the AC power adapter:

1. Insert the top of the new plug in the AC power adapter at a 45-degree angle.

You must insert the top of the new plug first. Do not use force to insert the plug into the adapter.

2. Press the bottom of the new plug into the AC power adapter.

The plug clicks into position.

Environmental Requirements

To safely install your XTM 2 Series device, we recommend that you:

 Install it indoors.

 Put it in a secure area, such as a locked room, to block the device from people who do not have

permission to use it

 Connect it to a conditioned power supply to prevent damage from sudden power changes

Other environmental requirements:

Operating temperature 0 – 40°C (32 – 104°F)

Operating relative humidity 10% - 85% Non-condensing

Non-operating temperature –40 – 70°C (–40 – 158°F)

Non-operating relative humidity 10% – 95% Non-condensing

6 WatchGuard XTM 2 Series

Hardware Specifications

Safety Notices

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements

include product safety approvals and other global compliance standards. Read these instructions carefully

before you operate the product, and refer to them as needed for continued safe operation of your product.

Product Safety Certification

The WatchGuard product is safety certified for these standards:

o CAN/CSA C22.2 No.60950-1-07

o IEC 60950-1, Second Edition

o UL 60950-1, Second Edition

Safety Warning

o Do not place objects on the power cord.

o Do not obstruct the ventilation openings. These openings prevent overheating of the XTM device.

o Never push objects of any kind into slots or openings on this equipment. If you make contact with a

voltage point or short out a part, it can result in fire or electrical shock.

o If the equipment is supplied with a three-conductor AC power cable, the power cable must be

plugged in to an approved three-contact electrical outlet with the grounding wire connected to an

electrical ground (safety ground) at the power outlet.

o When you remove or install an appliance, follow the general installation safety instructions provided

in this Hardware Guide to avoid injury or damage to the device.

The lithium battery used in the security appliance may not be replaced by the user. Return the appliance to a

WatchGuard authorized service center for replacement with the same or equivalent type recommended by

the manufacturer. If, for any reason, the battery or security appliance must be disposed of, do so following the

battery manufacturer’s instructions.

Hardware Guide 7

Hardware Specifications

Restore Factory Default Settings

If you have a problem in your configuration file that you cannot correct, you can restore the factory default

settings and start from a new configuration file. For example, if you do not know the administrator account

passphrase, or if a power interruption causes damage to the Fireware XTM OS, you can restore the XTM 2

Series device to the factory default settings and build your configuration again.

To set the XTM 2 Series device to the factory default settings:

1. Disconnect the power supply.

2. Press and hold the Reset button on the back of the device.

3. Connect the power supply while you continue to depress the Reset button.

4. Continue to depress the button until the Attn indicator stays lit. This shows that the device was

successfully restored to the factory default settings.

This process can take 75 seconds or more.

You must start the device again before you can connect to it. If you do not, when you try to connect to

the device, a web page appears with the message, “Your device is running from a backup copy of

firmware.” This message also appears if the Reset button is stuck in the depressed position. If you

continue to see this message, check the Reset button and start the device again.

5. Disconnect the power supply.

6. Connect the power supply again.

The Power Indicator is lit and your device is reset.

8 WatchGuard XTM 2 Series

Hardware Specifications

About the XTM 2 Series Wireless

The WatchGuard XTM 2 Series Wireless conforms to IEEE 802.11a/b/g/n wireless LAN standards. Some key

features that have an effect on performance of an 802.11a/b/g/n wireless device include antenna directional

gain, signal attenuation (path loss), and channel data rate.

Antenna Directional Gain

Antenna directional gain is based on the shape of the radiation pattern around the antenna. The XTM 2 Series

Wireless uses three 2.0 dBi swivel-mount whip antennas. The whip antenna has a radiation pattern similar to

a sphere that is depressed in the center. If the antenna is vertical, the gain is greater in the horizontal direction

and less in the vertical direction.

Signal Attenuation

The strength of the wireless signal can vary based on the distance between the XTM 2 Series device and the

wireless client, the orientation of the antennas, and many environmental factors such as physical obstructions

(cabinets, walls, doors, windows, cars driving by, and people moving around), other wireless devices (access

points and clients on overlapping channels, wireless phones, or nearby Bluetooth transmitters), and some

appliances such as microwave ovens, and mercury street lamps at night, to name a few.

Multi-path reflection occurs when RF signals to the receiver arrive via more than one path because of

reflections off walls and other surfaces between the transmitter and the receiver. Multi-path reflection can

cause signal strength to vary by as much as 30dB. To reduce variation in signal strength due to multi-path

reflection, the XTM 2 Series Wireless uses three antennas spaced some distance apart. This ensures that signal

conditions are different at each antenna, and lowers the chance of losing data due to poor reception at any

one antenna. All three antenna signals are combined, to increase the overall signal to noise ratio (SNR), and

therefore the increase data-rate at a given range.

Wireless clients often have one or two antennas that are spaced close together because of smaller enclosures.

As a result, the signal conditions at each antenna are more similar, and if there is a signal loss, both antennas

are negatively affected. The XTM 2 Series Wireless with three widely spaced antennas will tend to have better

range on average than a wireless client, and may be able to receive signals from a wireless client even if the

client cannot receive signals from the XTM 2 Series Wireless.

Channel Data Rate

Channel data rates change with the modulation type, which changes based on conditions. This includes noise

and the distance between transmitter and receiver. In general, the available data rates for an IEEE 802.11a/b/

g/n device range from 1 Mbps in the worst conditions to over 200 Mbps in the best conditions.

Hardware Guide 9

Legal and Regulatory Information

Limited Hardware Warranty

This Limited Hardware Warranty (the “Warranty”) applies to the enclosed hardware product, not including any associated

software, which is licensed pursuant to a separate end-user license agreement and warranty (the “Product”). BY USING

THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF. If you do not agree to these

terms, please return this package, along with proof of purchase, to the authorized dealer from which you purchased it for

a full refund. WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on the reverse side of

this card, as applicable:

1. LIMITED WARRANTY. WatchGuard warrants that upon delivery and for one (1) year thereafter (the “Warranty Period”):

(a) the Product will be free from material defects in materials and workmanship, and (b) the Product, when properly

installed and used for its intended purpose and in its intended operating environment, will perform substantially in

accordance with WatchGuard applicable specifications.

This warranty does not apply to any Product that has been: (i) altered, repaired or modified by any party other than

WatchGuard except for the replacement or inclusion of specified components authorized in, and performed in strict

accordance with, documentation provided by WatchGuard; or (ii) damaged or destroyed by force majeure events,

accidents, power spikes or similar events, or by any intentional, reckless or negligent acts or omissions of any party. You

may have additional warranties with respect to the Product from the manufacturers of Product components. However,

you agree not to look to WatchGuard for, and hereby release WatchGuard from any liability for, performance of,

enforcement of, or damages or other relief on account of, any such warranties or any breach thereof.

2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in Section 1 above, WatchGuard

will, following the receipt of the product you claim is defective and at its option, either (a) repair the Product, or (b)

replace the Product with a like or similar product; provided, that you will be responsible for returning the Product and for

all costs of shipping and handling. Repair or replacement of the Product shall not extend the Warranty Period. Any

Product, component, part or other item replaced by WatchGuard becomes the property of WatchGuard. WatchGuard

shall not be responsible for return of or damage to any software, firmware, information or data contained in, stored on, or

integrated with any returned Products.

3. DISCLAIMER AND RELEASE. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD, AND YOUR REMEDIES,

SET FORTH IN PARAGRAPHS 1 AND 2 ABOVE ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY WAIVE,

DISCLAIM AND RELEASE ANY AND ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND ALL

OTHER RIGHTS, CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD, EXPRESS OR IMPLIED, ARISING BY LAW

OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY IMPLIED

WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE, ANY WARRANTY OF

NONINFRINGEMENT, ANY WARRANTY OF UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION, LIABILITY,

RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE (WHETHER ACTIVE, PASSIVE OR

IMPUTED) OR FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY, STRICT LIABILITY OR OTHER THEORY, AND ANY

10 WatchGuard XTM 2 Series

Legal and Regulatory Information

OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY,

THE PRODUCT).

4. LIMITATION AND LIABILITY. WATCHGUARD'S LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY),

TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY)

WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT.

THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE

LIABLE TO YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING

ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER

OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS

OF PROFITS, BUSINESS, OR DATA) ARISING OUT OF OR IN CONNECTION WITH THIS WARRANTY OR THE USE OF OR

INABILITY TO USE THE PRODUCT, EVEN IF WATCHGUARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY.

5. MISCELLANEOUS PROVISIONS. This Warranty will be governed by the laws of the state of Washington, U.S.A., without

reference to its choice of law rules. The provisions of the 1980 United Nations Convention on Contracts for the

International Sales of Goods, as amended, shall not apply. You agree not to directly or indirectly transfer the Product or

use of the product or associated documentation to any country to which such transfer would be prohibited by the U.S.

Export laws and regulations. If any provision of this Warranty is found to be invalid or unenforceable, then the remainder

shall have full force and effect and the invalid provision shall be modified or partially enforced to the maximum extent

permitted by law to effectuate the purpose of this Warranty. This is the entire agreement between WatchGuard and you

relating to the Product, and supersedes any prior purchase order, communications, advertising or representations

concerning the Product AND BY USING THE PRODUCT YOU AGREE TO THESE TERMS. IF THE PRODUCT IS BEING USED BY

AN ENTITY, THE INDIVIDUAL INDICATING AGREEMENT TO THESE TERMS BY USING THE PRODUCT REPRESENTS AND

WARRANTS THAT (A) SUCH INDIVIDUAL IS DULY AUTHORIZED TO ACCEPT THE WARRANTY ON BEHALF OF THE ENTITY

AND TO BIND THE ENTITY TO THE TERMS OF THIS WARRANTY; (B) THE ENTITY HAS THE FULL POWER, CORPORATE OR

OTHERWISE, TO ENTER INTO THE WARRANTY AND PERFORM ITS OBLIGATIONS UNDER THE WARRANTY AND; (C) THE

WARRANTY AND THE PERFORMANCE OF THE ENTITY'S OBLIGATIONS UNDER THE WARRANTY DO NOT VIOLATE ANY

THIRD-PARTY AGREEMENT TO WHICH THE ENTITY IS A PARTY. No change or modification of the Warranty will be valid

unless it is in writing and is signed by WatchGuard.

Hardware Guide 11

Legal and Regulatory Information

Declaration of Conformity

12 WatchGuard XTM 2 Series

Legal and Regulatory Information

FCC Certification

This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired

operation.

NOTE: The antennas used for this transmitter must be installed to provide a separation distance of at least

20cm from all persons and must not be co-located or operating in conjunction with any other antenna or

transmitter.

Caution

Changes or modifications to ANY PART OF THIS PRODUCT not expressly approved by

WatchGuard could void the user's authority to operate the equipment per FCC regulations.

In particular, modifying antenna gain to exceed 2.0 dBi voids the FCC certification.

CE Notice

The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the

Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union

(EU).

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel broulleur du

Canada.

Hardware Guide 13

Legal and Regulatory Information

CANADA RSS-210

The term “IC:” before the radio certification number only signifies that Industry of Canada technical

specifications were met.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate with the antennas listed below, and having a maximum gain of 2.0

dBi. Antennas not included in this list or having a gain greater than 2.0 dBi are strictly prohibited for use with

this device. The required antenna impedance is 50 ohms.

WGRD P/N 155-3329-001 or any antenna with 2.0dBi or lower gain

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful

communication.

Frequency band from 5.15 GHz to 5.25 GHz is restricted to indoor use only to reduce potential for harmful

interference to co-channel mobile satellite systems. The maximum antenna gain permitted on devices in the

5725 – 5825 MHz band complies with the EIRP limits specified for point-to-point and non point-to-point

operation as appropriate, as stated in section A9.2(3).

VCCI Notice Class A ITE

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME

OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING

TO THE MANUFACTURER’S INSTRUCTIONS.

ATTENTION: IL Y A DANGER D’EXPLOSION S’IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE, REMPLACER

UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE OU D’UN TYPE ÉQUIVALENT RECOMMANDÉ PAR LE

CONSTRUCTEUR. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU

FABRICANT.

14 WatchGuard XTM 2 Series

Legal and Regulatory Information

Korean Class A Notice

Korean Wireless Notice

Taiwanese Class A Notice

Taiwanese Wireless Notice

Hardware Guide 15

Legal and Regulatory Information

France

En France, ce produit ne peut être installé et opéré qu'à l'intérieur, et seulement sur les canaux 10, 11, 12 , 13

comme défini par IEEE 802.11g/b. L'utilisation de ce produit à l'extérieur ou sur n'importe quel autre canal est

illégal en France.

In France, this product may only be installed and operated indoors, and only on channels 10, 11, 12, 13 as

defined by IEEE 802.11g/b. Use of the product outdoors, or on any other channel, is illegal in France.

RoHS Statement

The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous

Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic

equipment put on the market within the member states must not contain certain hazardous materials. The

WatchGuard XTM 2 Series complies with the European Union’s R0HS directive 2002/95/EC and similar

regulations that may be adopted by other countries for European Sales.

WEEE Statement

WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that

member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment (WEEE).

The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the

reduction of WEEE through reuse, recovery, and recycling of WEEE.

WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure that our

products are in compliance with the WEEE statutes, and that the recovery of our product per the specific EU

country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product

that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at:

U.S. Customers: 877.232.3531

International Customers: +1.206.613.0456

WatchGuard is reasonably confident that our products do not contain any substances or hazardous materials

presently banned by any legislation, and do not present a risk due to hazardous materials. WEEE recovery

professionals should also note that these products do not have any materials that are of particular high value

in their individual form.

16 WatchGuard XTM 2 Series

Legal and Regulatory Information

REACH Certificate of Compliance

The new EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals)

came into effect on June 1, 2007. REACH is Europe's new chemicals legislation, which is applicable in all 27 EU

Member States as well as the EFTA European Economic Area (EEA). REACH creates a new system for gathering

information, assessing risks to human health and the environment, and authorizing or restricting the

marketing and use of chemicals produced or supplied in the EEA. REACH has an impact on EEA producers and

importers of finished products and users of chemicals in the course of industrial or professional activities.

WatchGuard supports the overall REACH objective of improving the protection of human health and the

environment and will meet all applicable REACH requirements. WatchGuard is strongly committed to working

with our customers and supply chain to define and implement the REACH requirements and ensure a smooth

transition to compliance.

One of the REACH requirements is that manufacturers and importers have the duty to register substances they

are producing or importing. In accordance with the regulations, the products of WatchGuard do not need to

be registered for the following reasons:

1. WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH.

2. WatchGuard products are non-chemical products that are not designed to release any substance

under normal and reasonably predictable application.

3. Our products do not contain the listed substances at more than 0.1% by weight of the whole product/

part.

Licensing

Some components of the XTM 2 Series software are distributed with source code covered under one or more

third party or open source licenses. You can find full licensing information in the Licensing Guide on our public

web site at www.watchguard.com/help/documentation. We include below the full text of the GNU General

Public License.

To get the source code covered by this license, contact WatchGuard Technical Support at:

United States or Canada: 877.232.3531

All other countries: +1.360.482.1083

You can download the source code at no charge. If you request the material be sent to you on CD-ROM, there

is a $35 charge for administration and shipping.

Hardware Guide 17

Legal and Regulatory Information

GNU General Public License (GPL)

Each of the following programs are wholly or partially licensed under the GPL: ARPTables, bpalogin, bridge-

utils, busybox, ebtables, glibc, hostapd, iproute, ipset, iptables, iputils, linux, nmap, ppp, pptpd, rp-pppoe,

wireless_tools, wpa_supplicant.

Specific copyright information for the above software, if any, can be found in subsequent pages of this

chapter.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

51 Franklin Street, Fifth Floor

Boston, MA 02110-1301, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not

allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast,

the GNU General Public License is intended to guarantee your freedom to share and change free software--to

make sure the software is free for all its users. This General Public License applies to most of the Free Software

Foundation's software and to any other program whose authors commit to using it. (Some other Free

Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it

to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are

designed to make sure that you have the freedom to distribute copies of free software (and charge for this

service if you wish), that you receive source code or can get it if you want it, that you can change the software

or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you

to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of

the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the

recipients all the rights that you have. You must make sure that they, too, receive or can get the source code.

And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you

legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is

no warranty for this free software. If the software is modified by someone else and passed on, we want its

recipients to know that what they have is not the original, so that any problems introduced by others will not

reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that

redistributors of a free program will individually obtain patent licenses, in effect making the program

proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or

not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

18 WatchGuard XTM 2 Series

Legal and Regulatory Information

Terms and Conditions for Copying, Distribution, and Modification

1. This License applies to any program or other work which contains a notice placed by the copyright

holder saying it may be distributed under the terms of this General Public License. The “Program”,

below, refers to any such program or work, and a “work based on the Program” means either the

Program or any derivative work under copyright law: that is to say, a work containing the Program or

a portion of it, either verbatim or with modifications and/or translated into another language.

(Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is

addressed as “you”.

Activities other than copying, distribution and modification are not covered by this License; they are

outside its scope. The act of running the Program is not restricted, and the output from the Program is

covered only if its contents constitute a work based on the Program (independent of having been

made by running the Program). Whether that is true depends on what the Program does.

2. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any

medium, provided that you conspicuously and appropriately publish on each copy an appropriate

the absence of any warranty; and give any other recipients of the Program a copy of this License along

with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer

warranty protection in exchange for a fee. You may modify your copy or copies of the Program or any

portion of it, thus forming a work based on the Program, and copy and distribute such modifications

or work under the terms of Section 1 above, provided that you also meet all of these conditions:

 You must cause the modified files to carry prominent notices stating that you changed the files and

the date of any change.

 You must cause any work that you distribute or publish, that in whole or in part contains or is

derived from the Program or any part thereof, to be licensed as a whole at no charge to all third

parties under the terms of this License.

 If the modified program normally reads commands interactively when run, you must cause it, when

started running for such interactive use in the most ordinary way, to print or display an

announcement including an appropriate copyright notice and a notice that there is no warranty (or

else, saying that you provide a warranty) and that users may redistribute the program under these

conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself

is interactive but does not normally print such an announcement, your work based on the Program

is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not

derived from the Program, and can be reasonably considered independent and separate works in

themselves, then this License, and its terms, do not apply to those sections when you distribute them

as separate works. But when you distribute the same sections as part of a whole which is a work based

on the Program, the distribution of the whole must be on the terms of this License, whose permissions

for other licensees extend to the entire whole, and thus to each and every part regardless of who

wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by

you; rather, the intent is to exercise the right to control the distribution of derivative or collective works

based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a

work based on the Program) on a volume of a storage or distribution medium does not bring the other

work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or

executable form under the terms of Sections 1 and 2 above provided that you also do one of the

following:

Page is loading ...

Watchguard XTM 2 Series (XTM 21-23) Hardware Guide

Watchguard XTM 2 Series (XTM 21-23) Hardware Guide

Watchguard XTM 2 Series (XTM 21-23) Hardware Guide

Related papers

Other documents