BENDIX 03-A-05E User manual

BENDIX
Brand
BENDIX
Model
03-A-05E
Type
User manual
BW9043 © 2004 Bendix Commercial Vehicle Systems LLC 8/2004. Printed in U.S.A. All rights reserved.
CATALOG
03-A-05E
SERVICE NUMBERS
SR-7
™
SPRING BRAKE
MODULATING VALVE
The Bendix
®
SR-7
™
Spring Brake Modulating Valve is used
in conjunction with a dual air brake system and spring
brake actuator and performs the following functions:
1. Provides a rapid application of the spring brake actuator
when parking.
2. Modulates the spring brake actuator application using
the dual brake valve should a primary failure occur in
the service brake system.
3. Prevents compounding of service and spring forces.
1/4" NPT
Park Control
Balance Port
Shown with
Push-to-Connect
(PTC) fitting.
3/8" NPT
Delivery
Mounting Studs
(2)
3/8" NPT
Delivery
Exhaust
1/2" NPT
Supply
Control Port
Shown with
NPT port.
For service information see Service Data Sheet
SD-03-9043.
Weight 3.3 lbs.
Device Code 9043
Service Replaces O.E. Mounting Stud Control Port Balance Port
Piece Number Piece Number Thd. Length (in.) Size Fitting Size Fitting
801328 5012488, 5012489 3/8"-16 .94 1/4" NPT -- 1/4 NPT --
5012568 & 5012100
801329 5010914, 5010915 3/8"-16 .94 3/8 PTC Straight 3/8 PTC Straight
5010916, 5010917,
5011179, 5011180
5012045, 5012046
& 5013055
801536 5012472 & 5012831 3/8"-16 .94 3/8 PTC 90° 3/8 PTC Straight
801569 5012569 M10 1.38 3/8 PTC 90° 3/8 PTC 90°
801570 5012615 -- -- 1/4 NPT -- 1/4 NPT --
801571 5012616 & 5013862 -- -- 3/8 PTC Straight 3/8 PTC Straight
801898 5013864 3/8"-16 1.38 3/8 PTC Straight 3/8 PTC Straight
Note: Service piece numbers are basic valves supplied without fittings and pipe plugs. Reuse pipe plugs and
fittings when replacing the Original Equipment (O.E.) valves.
  • Page 1 1

BENDIX 03-A-05E User manual

BENDIX
Brand
BENDIX
Model
03-A-05E
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents