Eneo DTR-2016/750CD Operating instructions

Operating Instructions

Digital Video Recorder

Models: DTR-2009/250CD, DTR-2016/250CD,

DTR-2009/500CD, DTR-2016/500CD,

DTR-2009/750CD DTR-2016/750CD

3

DTR-20XX

Safety instructions

EMC class

This digital video recorder (DVR) is a class A device in accordance with EN 55022.

This device may cause interference to other equipment in domestic use. In such cases the persons opera-

ting the DVR are required to provide appropriate countermeasures, for which they themselves bear the cost.

►

Importance of these Operating Instructions

Please read the safety instructions and the other information contained in the Operating Instructions before

connecting up and operating the DVR.

The Operating Instructions should be kept in a safe place for later reference.

►

Ambient conditions

The DVR should be protected against excessive heat, dust, moisture and vibration.

The DVR may only be operated at temperatures between +5°C and +40°C, and up to a maximum air

humidity of 90%.

The DVR may only be operated indoors, and must be protected against ingress of water and moisture.

►

Care of the DVR

Never switch on the DVR when moisture has penetrated it. In such cases, have the DVR checked by a

qualied service engineer.

Do not place any heavy objects on the DVR.

Never cover over the DVR‘s vents.

Never insert metal objects or any other items into the vents. This may permanently damage the DVR.

The housing may only be opened by authorised persons. Repairs may only be carried out by qualied

service personnel.

The DVR must be disconnected from the power supply before its housing is opened.

►

Getting started with the DVR

When laying the connecting cables, make sure no weight is placed on them, that they are not kinked or

damaged, and that no moisture can penetrate them..

►

Cleaning

The housing of the DVR may only be cleaned with a moisture (not wet) cloth.

Use only a mild detergent. Do not use solvent-containing detergents or petrol. This could permanently

damage the surface nish.

►

Spare parts

Use only original spare parts from Videor Technical GmbH..►

5

DTR-20XX

Table of contents

Overview 7

Package contents

7

Basis functions

7

Features

7

Requirements for operation

7

Control options

7

Connections on the rear

8

Front panel controls

9

Key to controls 1

0

Function buttons 1

0

PTZ camera functions 10

Playback functions 1

0

Remote control functions 1

1

Playback functions 1

1

Menu overview 12

Accessing the menus 1

4

Accessing the Display menu 1

4

Accessing the PTZ menu 1

4

Accessing the Setup menu 1

5

Accessing the Search menu 1

5

Getting started 1

6

Checklist for DVR operation 1

6

Connecting the remote control and DVR 1

6

Switching on the DVR 1

7

Switching off the DVR

17

Administration 1

8

Saving your system setup 1

8

Loading your system setup 1

8

Deleting recordings

18

Downloading software updates 1

9

Hiding from specic users 1

9

Restoring factory defaults 1

9

Determining the memory requirement of a recording 2

0

Searching for recordings 21

Using calendar search 2

2

Using event log search 2

3

Using text-in search 2

4

Using motion search 2

5

Copying recordings 2

6

DTR-20XX

Table of contents

Menu descriptions – Setup menu 27

System – Information 2

8

System – Date/Time 2

9

System – Storage 3

0

System – User 3

2

System – Shutdown 3

3

System – Log out user1... 3

3

Network – Network 3

3

Network – Notication 3

6

Devices – Camera 3

7

Devices – Audio 3

8

Devices – Alarm-Out 3

9

Devices – Display 4

0

Devices – Remote Control 4

1

Record – Record 4

2

Record – Schedule 4

3

Record – Pre-Event 4

4

Record – Archive 4

5

Event – Alarm-In 4

6

Event – Motion Detection 4

8

Event – Video Loss 5

0

Event – Text-In 5

2

Event – System Event 5

4

Event – Event Status 5

6

Specications DTR-2009

57

Specications DTR-2016 5

9

Accessories 6

1

Supported PTZ cameras 6

2

Index 6

3

Notes on disposal 66

7

DTR-20XX

Overview

Package contents

Digital video recorder (DVR)

Mains power cord

Operating instructions

RAS (Remote Administration System) software on CD

Operating instructions for RAS software on paper and CD

Mounting kit for rack installation

Screws for attaching SCSI Connector

Mounting screws and guide for installation of hard disk drives

Infrared remote control

Basis functions

Recording of video images from multiple cameras

Event-triggered start of recording

Video playback

Search for specic video sequences

Features

MPEG-4 compression / duplex mode

9 or 16 loop-through inputs / VGA, S-VHS/FBAS outputs

Audio and alarm inputs / outputs

Max. recording speed: 100 eld images per sec (PAL)

Memory capacity 250 GB / 500 GB / 750 GB

Maximum video resolution 720 x 576 pixels

SCSI port for archiving / memory expansion

Various recording criteria possible

Archiving/image transfer via USB and CD-RW

ATM/POS text display / 2x to 4x digital zoom

Telemetry control functions via RS-485 port

Network port (Ethernet) / IR remote control

Requirements for operation

Digital video recorder DTR connected

At least 1 camera connected

At least 1 monitor connected

Mouse connected, if DVR is to be controlled by mouse

Control options

Front panel

Remote control

Mouse

RAS program

●

8

DTR-20XX

Connections on the rear

Note: Connections optionally for NTSC or PAL operation.

AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 AUDIO OIT

VIDEO IN

LOOP

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

SPOT 1 SPOT 2

SPOT 3 SPOT 4

VIDEO OUT

SVHS OUT

NETWORKUSB RS-232C VGA SCSI

RS-485

ARI GNDAO1 AO2 AO3 AO4 AO5 AO6 AO7 AO8

GND GND GND

AO9

AO11AO10 AO12 AO13 AO14 AO15 AO16

GND

AI1 AI2 AI3 AI4 AI5 AI6 AI7 AI8

GND GND GND

AI9

AI11AI10 AI12 AI13 AI14 AI15 AI16

GND

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

1 2 3 4 5 6

13 12 111718 16 1415 910 8 7

No. Designation Functions/connections Example devices

1 VIDEO IN 1-16 Max. 16 video channels Cameras

2 LOOP 1-16 Max. 16 loop-through video channels Cameras

3 SVHS OUT S-VHS output Monitors

4 VIDEO OUT Video output Monitors

5 SPOT1 - SPOT4 Max. 4 video outputs Spot monitors

6 RS-485 External interface Keyboard, PTZ camera

7 NETWORK Network Network cable

8 ARI/GND

Reset alarm

with external signal

Switch

9 SCSI External storage media Hard disk

10 AO1 - AO16 Alarm outputs for external devices Siren, ashing light

11 VGA PC monitor PC monitor

12 RS-232C External interface Modem

13

USB External interface Drive, mouse

14 Reset switch Reset to factory defaults -

15 AI1 - AI16 Alarm inputs for external devices Sensors

16 AUDIO OUT Audio output Amplier, speakers

17

AUDIO IN 1 -

AUDIO IN 4

Max. 4 Audio inputs Microphone

18 Power supply Mains power connection -

9

DTR-20XX

Front panel controls

The following diagram and table shows the controls on the front panel of the DVR:

CAMERA

PLAY

/PAUS

E

SEARCH

FFRW

FO

RWARD

BACKW

ARD

PANIC

HDD

NETWORK

POWER

JOG

DISPLAY

MENU

SEQUENCE

ALARM

SPOT

ZOOM

FREEZE

PTZ

1

9

2

10

3

11

4

12

5

13

6

14

7

15

8

16

1 32 4 5 6

14 13 1011 9 712 8

No. Designation Function

1 USB ports

2 Eject built-in CD-RW writer

3 1 to 16

Select cameras

Enter passwords

●

4 Menu navigation

Navigation and selection within the menu

5 PANIC

Start/end panic recording

6 Shuttle ring

Innitely adjust playback speed

7 Jog dial

Change size of frame in picture-in-picture mode

Change numerical values in Setup menu

Frame-by-frame playback in Play mode

●

8

Playback functions (primary assignment)

PTZ camera functions (secondary assignment)

9 POWER Power-on indicator when DVR is in operation

10 NETWORK Indicates Ethernet or modem connection

11 HDD Indicates hard disk operation

12

DISPLAY, SEQUENCE,

FREEZE, SPOT, ZOOM,

PTZ

Function buttons

13

ALARM

Reset alarm

View event list

●

14 MENU Open/quit menu structure

10

DTR-20XX

Key to controls

Function buttons

Element Function

Change display mode

Switch video input by pressing and holding down button

●

Sequence On/Off

Freeze On/Off

PTZ camera functions On/Off

Zoom On/Off

Spot monitor assignments

PTZ camera functions

Element Function

Zoom in

Zoom out

Close-up

Wide-angle

Save preset

Load preset

Playback functions

Element Function

Select Search/Play function

Stop playback

●

Frame-by-frame rewind

Fast rewind

Start/pause playback

Fast forward

Frame-by-frame forward

11

DTR-20XX

Remote control functions

The following diagram and table shows the functions on the remote control:

ID

Select System ID

DISPLAY

TRIPLEX

FOCUS PRESET

SET

VIEW

ZOOM

AUDIO

CLIP COPY

BOOK MARK

FREEZE ALARM

SEQUENCE

SPOT

CAMERA

2 3 41

1

5

9

13

2

6

10

14

3

7

11

15

4

8

12

16

MENU PTZ

ZOOM

PANIC

DIGITAL VIDEO RECORDER

Remote Controller

1

2

3

4

5

6

7

12

10

11

8

9

No. Designation Function

1

SPOT 1 - 4

Spot monitor assignments

2 ALARM

Reset alarm

View event list

●

3 1 to 16

Select cameras

Enter passwords

●

4

PTZ camera functions

5 PTZ PTZ camera functions On/Off

6 ZOOM Zoom On/Off

7

Playback functions

8 PANIC Start/end panic recording

9 Menu navigation

Navigation and selection within

the menu

10 MENU Open/quit menu structure

11

No function

12

DISPLAY, SEQUENCE,

FREEZE

Function buttons

Playback functions

Element Function

Select Search/Play function

Stop playback

●

Pause playback

Start playback

Fast rewind

Fast forward

Frame-by-frame rewind

Frame-by-frame forward

12

DTR-20XX

The following illustration shows the structure of the complete menu tree that is accessible using the mouse

control:

Display Camera 1. CAM1

2. CAM2

3. CAM3

PIP Left-Top

Left-Bottom

Right-Top

Right-Bottom

Size 1/16

Size 1/9

Size 1/4

2x2

3x3

4x4

Previous Group

Next Group

Edit Group Camera

Spot Monitor...

Toggle VGA ...

Exit Group Edit

Sequence

Freeze

Zoom...

PTZ... Speed

Auto Pan

Tour

Pattern

Device Menu

Light

Pump

Wiper

Power

Aux.

Move to Origin

Spot Monitor

Toggle VGA ...

Exit PTZ

Spot Monitor... Select Spot Monitor

Spot Monitor 1

Spot Monitor 2

Spot Monitor 3

Spot Monitor 4

Toggle VGA ...

Menu overview

13

DTR-20XX

The following illustration shows the structure of the complete menu tree that is accessible using the mouse

control:

Setup menu... System Information

Date/Time

Storage

User

Shutdown...

Log out user1...

Network Network

Notication

Devices Camera

Audio

Alarm-Out

Display

Remote Control

Record Record

Schedule

Pre-Event

Archive

Exit Search

Menu overview, continued

14

DTR-20XX

Accessing the menus

Accessing the Display menu

Requirement:

The current camera image is shown in full image or quad image.

Step Action Access using Key sequence/menu path

1 Open Display menu...

Device

Remote control

Mouse Display

Access to submenu via Device/Remote Control

Submenu Camera image Key sequence

Change Display modes (PIP, 2x2, 3x3, 4x4)

Without frame

....

Previous/Next Group Without frame

Edit Group With frames >

Change position of image-in-image Without frame

Change size of image-in-image Without frame Jog dial

Accessing the PTZ menu

Requirement:

A PTZ camera is connected and congured.

Current camera image is shown as a full image.

Step Action Access using Key sequence/menu path

1

Open PTZ menu...

Result: Menu of the congured PTZ

camera is shown.

Device >

Remote control PTZ > MENU

Mouse PTZ...

●

15

DTR-20XX

Accessing the Setup menu

Requirement:

The current camera image is shown in full image or quad image.

Step Action Access using Key sequence/menu path

1

Open Setup menu...

Result: Prompt for user name and

password.

Device

Remote control MENU

Mouse Setup menu...

2

Log in as user.

User name: admin

Password: (blank)

Note: Use default access data only for

rst-time access.

Accessing the Search menu

Requirement:

The current camera image is shown in full image or quad image.

Step Action Access using Key sequence/menu path

1

Open Search menu...

Result: Search for recorded images is

activated.

Device >

Remote control

> MENU

Mouse Search

●

Accessing the menus, continued

16

DTR-20XX

Getting started

Checklist for DVR operation

Step Action Menu path

1 Connect peripheral devices as per planned setup.

2 Specify menu language.. Setup menu... > System > Information

3 Adjust date and time.. Setup menu... > System > Date/Time

4 Set up user. Setup menu... > System > User

5

Set up network and desired notication channels

(optional).

Setup menu... > Network > ...

6 Register peripherals with DVR. Setup menu... > Devices > ...

7 Set up event types and associated responses. Setup menu... > Event > ...

8 Set up recording parameters and schedule. Setup menu... > Record > ...

Connecting the remote control and DVR

The remote control and DVR can be assigned an ID, because the ID of each DVR in the network must be

unique. The DVR will then only respond to the remote control with the matching ID.

If the system ID in the DVR is 0, it will respond to the remote control regardless of the remote’s ID.

If the system ID in the DVR is not 0, you must set the ID of the remote control identically.

Step Action Menu path

1 Set DVR system ID. Setup menu... > System > Information

2

Match remote control to system ID by

pressing ID button on remote control.

3 Select relevant number on remote control.

●

17

DTR-20XX

Getting started, continued

Switching on the DVR

Requirement:

The start-up preparations are complete.

Step Action

1

Plug in DVR mains plug.

2

Switch on monitor.

Result: System starts up automatically and is ready to use.

Switching off the DVR

Requirement:

You have accessed the Setup menu.

Step Action Menu path

1

Shut down system.

Result: System shuts down automatically.

Setup menu > System > Shutdown ...

2 After shutdown, disconnect the mains plug.

●

18

DTR-20XX

Administration

Saving your system setup

You can save your DVR’s setup data, including its network conguration.

Requirement:

USB memory stick

Step Action Menu path

1

Insert a USB memory stick into one of the USB

ports

2 Export your setup.

Setup menu... > System > Information >

Setup Export...

3 Specify a le name.

4 Export your setup. Export

Loading your system setup

You can load your stored DVR system setup with or without its network conguration.

Requirement:

USB memory stick with stored setup

Step Action Menu path

1

Insert a USB memory stick into one of the USB

ports.

2 Import your setup.

Setup menu... > System > Information >

Setup Import...

3

Select the le name and, where appropriate, the

network conguration.

4 Import your setup. Import

Deleting recordings

You can only delete all your recordings together. It is not possible to delete recordings from a specic time

period.

Step Action Menu path

1

Delete all recordings.

Setup menu > System > Information > Clear All

Data...

or

Setup menu > System > Storage > Information tab

> Using > Clear

●

19

DTR-20XX

Administration, continued

Downloading software updates

You can download software updates for your DVR from a USB memory stick.

Requirement:

USB memory stick with latest software release

Step Action Menu path

1

Insert a USB memory stick into one of the

USB ports.

2 Start update. Setup menu... > System > Information > Upgrade...

3 Install new release

Hiding from specic users

You can hide video images and camera data according to the preset user rights.

Step Action Menu path

1 Set camera Covert mode. Setup menu... > Devices > Camera > Settings

2

Cancel ‘Covert Camera View‘ access for

specic users (groups).

Setup menu... > System > User

Restoring factory defaults

Before restoring the factory defaults, you should export your current system settings in case you need to re-

import them later. (see Saving your system setup and Loading your system setup)

Step Action

1 Shut down the system.

2 Disconnect the mains plug.

3 Push a paper clip into the Reset button (on the rear of the DVR) and hold it there.

4 Plug in the mains plug.

5 Wait for all the LEDs to ash 5 times (about 30 seconds).

6 Withdraw the paper clip.

●

20

DTR-20XX

Administration, continued

Determining the memory requirement of a recording

The amount of memory recorded video sequences will take up depends on the following factors:

picture quality

number of images per second

duration

The memory requirement is calculated by this formula:

Memory requirement = picture size x duration of recording x images per second

Example calculation of CIF resolution (PAL):

Picture

quality

Picture

size

Duration of

recording

Approx. memory space

5 images/s 10 images/s 25 images/s

Basic 2.4 KB 24 hours 1.04 GB 2.07 GB 5.18 GB

Standard 4.8 KB 24 hours 2.07 GB 4.15 GB 10.37 GB

High 9.6 KB 24 hours 4.15 GB 8.29 GB 20.74 GB

Very high 14.4 KB 24 hours 6.22 GB 12.44 GB 31.10 GB

Example calculation of 2CIF resolution (PAL):

Picture

quality

Picture

size

Duration of

recording

Approx. memory space

5 images/s 10 images/s 25 images/s

Basic 4.8 KB 24 hours 2.07 GB 4.15 GB 10.37 GB

Standard 9.6 KB 24 hours 4.15 GB 8.29 GB 20.74 GB

High 19.2 KB 24 hours 8.29 GB 16.59 GB 41.47 GB

Very high 28.8 KB 24 hours 12.44 GB 24.88 GB 62.20 GB

●

Page is loading ...

Eneo DTR-2016/750CD Operating instructions

This manual is also suitable for

Eneo DTR-2016/750CD Operating instructions

Related papers

Other documents