Introducing the BEA Stanley Dip Switch I, a versatile and reliable control system designed to enhance the functionality of your automatic door or gate. With its advanced features and user-friendly design, this dip switch offers a range of possibilities to customize and optimize your access control system. Here are some key capabilities:
-
Multi-functionality: The BEA Stanley Dip Switch I can be programmed for various applications, including push-n-go, latch assist, ratchet function, and stack pressure.
-
Safety and Security: The dip switch allows for the integration of safety beams and magnetic reed switches to ensure safe operation and prevent accidents.
Introducing the BEA Stanley Dip Switch I, a versatile and reliable control system designed to enhance the functionality of your automatic door or gate. With its advanced features and user-friendly design, this dip switch offers a range of possibilities to customize and optimize your access control system. Here are some key capabilities:
-
Multi-functionality: The BEA Stanley Dip Switch I can be programmed for various applications, including push-n-go, latch assist, ratchet function, and stack pressure.
-
Safety and Security: The dip switch allows for the integration of safety beams and magnetic reed switches to ensure safe operation and prevent accidents.
B.E.A., Inc.
DATE:
REV:
DRAWN BY:
SHEET:
SCALE:
SIZE:
CAGE CODE:
DWG NO:
FILE OF:
A
1 OF 1
NONE
05 JAN 04
ENG'G
JED
01
BLANK 1
INHIBIT GND 2
INHIBIT + 3
N.C. 4
N.O. 5
COM 6
POWER 7
POWER 8
SAFETY SIDE
BLANK 1
INHIBIT GND 2
INHIBIT + 3
N.C. 4
N.O. 5
COM 6
POWER 7
POWER 8
APPROACH SIDE
MAGNETIC REED
SWITCH
COM.
N/C
OPTION
3
5
1
4
CMN 6
8
7
24VAC
ISO RELAY
COIL
5 4 3 2 1
* P1 COMMON
N/O
N/C
N/O
N/C WHITE*
2
EAGLE
24 V
TRANSFORMER
115 VAC
BODYGUARD
DK-12
DATA + 7
DATA - 6
N.C. 5
N.O. 4
COM 3
POWER 2
POWER 1
MOTOR
90 DEGREE LIMIT SWITCH
LO21
BROWN
ORANGE
WHITE
RED/WHITE
GREEN
RED
"B" CONTROL
WHITE
NOTES: 1) OPTION SAFETY SIDE SUPERSCAN INHIBIT WITH MAGNETIC
REED SWITCH.
2) SWITCH MUST BE ADJUSTED TO OPEN AT APPROXIMATELY
70 DEGREES.
3) LO-21 RED AND BLACK WIRES CONNECT TO THE SOLENOID VALVE.
SOLENOID WIRES TYPICALLY
RED OR BLACK
RED
BLACK
RESISTOR
TITLE: KM 2000 "B" CONTROL WITH EAGLE,
BODYGUARD, SUPERSCANS, INHIBIT
RELAY
80.0111
BLUE
WHITE
100 Enterprise Drive, Pittsburgh, PA 15275
PH: (412) 249-4100 FAX: (412) 249-4101
SIZE:
DRAWN BY:
TITLE: KM 3100 "K" CONTROL WITH
COMMANDER SYSTEM
A
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
KJG TUC
80.0134.01
SCALE: DATE:
NONE 23 NOV 2005
PART NO:
SHEET
1 OF 1
NOTES: 1) WIRE LO-21 RED / BLACK WIRES TO MICRO-SWITCH WHEN STACK OR LATCH ASSIST FUNCTIONS ARE TURNED
ON. (SEE NOTE 2)
2) AN ADDITIONAL MICROSWITCH WILL NEED INSTALLED ON OPERATOR ORIENTED 180 DEGREES FROM CLOSED
LATCH SPEED SWITCH. THIS WILL PROVIDE PROPER VOLTAGE TO THE LO21K. CONTACT B.E.A. TECHNICAL
SUPPORT FOR WIRING INFORMATION.
3) SW-1 SETTINGS (UP IS OFF) 1.PUSH-N-GO 2. LATCH ASSIST 3. RATCHET FUNCTION 4. STACK PRESSURE.
4) DUAL CONTROL SHOWN
5) SW-1 CALIBRATION SWITCH REMOVE JUMPER AFTER 1ST ACTIVATION AFTER INITIAL POWER UP. STORE ON 1 POST.
F1
J10
J3
J6
J1
J5
F2
J2
J9
W12
SW1
F3
MICRO
CONTROL
OPERATOR
BLACK -
RED +
YELLOW
DATA + 7
blue
DATA - 6
brown
N.C. 5
N.O. 4
green
COM 3
white
POWER 2
black
POWER 1
red
N.C. 5
N.O. 4
green
COM 3
white
POWER 2
black
POWER 1
red
RED/WHITE
WHITE
BODYGUARD
LO-21K
OFF
ON
RED
GREEN
BLACK -
EAGLE
24 V
TRANSFORMER
LO21K DEFAULT DIP SWITCHES
FOR KM
+- +-
BROWN
GREEN
WHITE
WHITE
BROWN
IF USING DRY CONTACT SAFETY BEAM
CONNECT N.O. & COM. TO GRAY & PURPLE
RESPECTIVLEY
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC.
FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS,
CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT
LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE
DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE
AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
SIZE:
DRAWN BY:
B
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
KJG TUC
SCALE: DATE:
NONE 01 DEC 2005
PART NO:
SHEET
1 OF 1
NOTES: 1 ) SW-1 SETTINGS (UP IS OFF) 1.PUSH-N-GO 2. LATCH ASSIST 3. RATCHET FUNCTION 4. STACK PRESSURE.
2 ) DUAL CONTROL SHOWN
3 ) SW-1 CALIBRATION SWITCH REMOVE JUMPER AFTER 1ST ACTIVATION AFTER INITIAL POWER UP. STORE ON 1 POST.
LEFT APPRCH SIDE SSCAN
RIGHT APPRCH SIDE SSCAN
TITLE: KM 3000/3100 (MICRO) K-CONTROL
LO21K, W/PARALLAX 2 SYSTEM
Q-DISCONNECT ON APPROACH SIDE
80.0176.02
RIGHT SAFETY SIDE SSCAN
LEFT SAFETY SIDE SSCAN
BODYGUARD
24 V
TRANSFORMER
SUPERSCAN QUICK
DISCONNECT CABLE
SUPERSCAN QUICK
DISCONNECT CABLE
F1
J10
J3
J6
J1
J5
F2
J2
J9
W12
SW1
F3
MICRO
CONTROL
OPERATOR
BLACK -
RED +
YELLOW
EAGLE
N.C. 5
N.O. 4
green
COM 3
white
POWER 2
black
POWER 1
red
RED
GREEN
OFF
ON
LO21K
GREEN
BLACK -
YELLOW
BLUE
HOLD OPEN
AUTO
OFF
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC. FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME
AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE
ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER
SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
STALL
SIZE:
DRAWN BY:
TITLE:
B
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
KJG TUC
SCALE: DATE:
NONE 01 DEC 2005
PART NO:
SHEET
1 OF 1
NOTES: 1 ) SW-1 SETTINGS (UP IS OFF) 1.PUSH-N-GO 2. LATCH ASSIST 3. RATCHET FUNCTION 4. STACK PRESSURE.
2 ) DUAL CONTROL SHOWN
3 ) SW-1 CALIBRATION SWITCH REMOVE JUMPER AFTER 1ST ACTIVATION AFTER INITIAL POWER UP. STORE ON 1 POST.
RIGHT APPRCH SIDE SSCAN
TITLE: KM 3000/3100 (MICRO) K-CONTROL
LO21K, W/PARALLAX 1 SYSTEM
Q-DISCONNECT ON APPROACH SIDE
80.0177.02
LEFT SAFETY SIDE SSCAN
BODYGUARD
24 V
TRANSFORMER
F1
J10
J3
J6
J1
J5
F2
J2
J9
W12
SW1
F3
MICRO
CONTROL
OPERATOR
BLACK -
RED +
YELLOW
EAGLE
N.C. 5
N.O. 4
green
COM 3
white
POWER 2
black
POWER 1
red
RED
GREEN
OFF
ON
LO21K
GREEN
BLACK -
YELLOW
BLUE
HOLD OPEN
AUTO
OFF
QUICK-DISCONNECT CABLE
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC. FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME
AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE
ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER
SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
STALL
SIZE:
DRAWN BY:
TITLE: KM 3000/3100 (MICRO) K-CONTROL
LO21K, W/PARALLAX 1 SYSTEM
Q-Disconnect on Safety Side
A
NOTES: 1) SW-1 SETTINGS (UP IS OFF) 1.PUSH-N-GO=(OFF). 2. LATCH ASSIST=(OFF). 3. RATCHET FUNCTION=(OFF).4. STACK
PRESSURE=(OFF).
2) LO21K: DIP SWITCHES 6, 7, 8, NOT USED.
3) SW-1 CALIBRATION SWITCH (LOCATED ON CONTROL) REMOVE JUMPER AFTER 1ST ACTIVATION AFTER INITIAL
POWER UP. STORE ON 1 POST.
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
TUC TUC
80.0210.01
SCALE: DATE:
NONE 18 OCT 2005
PART NO:
SHEET
1 OF 1
F1
J10
J3
J6
J1
J5
F2
J2
J9
W12
SW1
F3
MICRO
CONTROL
YELLOW
QUICK DISCONNECT
CABLE
APPROACH SUPERSCAN
SAFTY SUPERSCAN
EAGLE
N.C. 5
N.O. 4
green
COM 3
white
POWER 2
black
POWER 1
red
BODYGUARD
RED
GREEN
OFF
ON
LO21K
24 V
TRANSFORMER
HOLD OPEN
OFF
AUTO
MOTOR
-
+
DIP SWITCHES
6, 7, 8, NOT USED
(NOT USED)
RED
BLACK
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC.
FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS,
CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT
LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE
DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE
AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
SIZE:
DRAWN BY:
TITLE: KM 3000/3100 (MICRO) K-CONTROL
LO21K, W/PARALLAX 1 SYSTEM
Q-Disconnect on Approach Side
A
NOTES: 1) SW-1 SETTINGS (UP IS OFF) 1.PUSH-N-GO(OFF). 2. LATCH ASSIST(OFF). 3. RATCHET FUNCTION(OFF). 4. STACK
PRESSURE(OFF).
2) LO21K: DIP SWITCHES 6, 7, 8, NOT USED.
3) SW-1 CALIBRATION SWITCH REMOVE JUMPER ON CONTROL AFTER 1ST ACTIVATION AFTER INITIAL POWER
UP. STORE ON 1 POST.
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
TUC TUC
80.0211.01
SCALE: DATE:
NONE 18 OCT 2005
PART NO:
SHEET
1 OF 1
F1
J10
J3
J6
J1
J5
F2
J2
J9
W12
SW1
F3
MICRO
CONTROL
YELLOW
QUICK DISCONNECT
CABLE
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC.
FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS,
CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT
LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE
DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE
AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
APPROACH SUPERSCAN
SAFTY SUPERSCAN
EAGLE
N.C. 5
N.O. 4
green
COM 3
white
POWER 2
black
POWER 1
red
BODYGUARD
RED
GREEN
OFF
ON
LO21K
24 V
TRANSFORMER
HOLD OPEN
OFF
AUTO
MOTOR
-
+
DIP SWITCHES
6, 7, 8, NOT USED
(NOT USED)
RED
BLACK
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC. FOR FURTHER ASSISTANCE
DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 /
MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING
WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION
OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM
SIZE:
DRAWN BY:
TITLE: KM "K" CONTROL
LO-LINX SYSTEM
A
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
80.0286.00
SCALE:
DATE:
NONE
10/15/2007
PART NO:
SHEET
1 OF 1
JED TUC
NOTES:
1. MOTOR CONNECTION IS TIED IN PARALLEL TO EXISTING MOTOR LEADS. NO RESPECT TO PALARITY IS REQUIRED.
2. EXTERNAL SWITCHES ARE REQUIRED IF INHIBIT DESIRED AT SWING SIDE SUPERSCANS, SWITCH OPENS UPON INHIBIT POINT.
3. THE KNOWING ACT SWITCH IS CONNECTED AT THE AUX INPUT AND CAN BE ANY DRY CONTACT DEVICE SUCH AS A PUSHPLATE, CARD READER,
ETC. THE AUX INPUT IS REQUIRED FOR ALL INITIAL ACTIVATION WHEN FUNCTION 'FA' ON THE LO-LINX IS SET TO '01'.
4. THE SECOND BODYGUARD AND EAGLE ARE PRIMARILY USED IN DUAL-EGRESS APPLICATIONS. ENSURE BODYGUARD RELAY VALUE IS SET TO 2.
BROWN
WHITE
BLUE
YELLOW
GREEN
G
R
E
E
N
/
A
C
T
W
H
I
T
E
/
C
O
M
YELLOW/STALL
R
E
D
/
S
A
F
KM K CONTROL
Pre-wired
switch
assembly
DC
MOTOR
-
+
RED
RED
BLACK
RED
BODYGUARD (Y) HARNESS
USED FOR DUAL-EGRESS
APPLICATIONS
*
LO-LINX SUPERSCAN HARNESS
p/n: 70.5071
LO-LINX EAGLE HARNESS p/n: 20.5096
LO-LINX BODYGUARD
HARNESS p/n: 20.5082
LO-LINX POWER
HARNESS p/n: 20.5095
LO-LINX SWITCH HARNESS p/n: 20.5078
LO-LINX CONTROL
HARNESS p/n: 20.5097
24 V
TRANSFORMER
HOLD OPEN
OFF
AUTO
RED
BLACK
WHITE
LO-LINX MOTOR HARNESS p/n: 20.5076
75.5137.02
LO-LINX
SETUP
INCR.
FUNCT.
12-24V
AC/DC
PWR
TO CTRL
STALL
SAFETY
ACTIV.
STALL COM
SFTY / ACT COM
BEAM
TX RX
SWITCH
GND
AUTO
HOLD
AUX
COM
N/O
EAGLE 1
EAGLE 2
BODY-
GUARD
SENSORS
DOOR MTD
SENSOR 1
DOOR MTD
SENSOR 2
MTR
MOTOR
STALL 1
STALL
STALL 2
E
M
P
T
Y
1
I
N
H
I
B
I
T
G
N
D
2
I
N
H
I
B
I
T
+
3
N
.
C
.
4
N
.
O
.
5
C
O
M
6
P
O
W
E
R
7
P
O
W
E
R
8
E
M
P
T
Y
1
I
N
H
I
B
I
T
G
N
D
2
I
N
H
I
B
I
T
+
3
N
.
C
.
4
N
.
O
.
5
C
O
M
6
P
O
W
E
R
7
P
O
W
E
R
8
RED
BLACK
WHITE
GREEN
RED
BLACK
WHITE
GREEN
DOOR MTD SENSOR
APPROACH SIDE
DOOR MTD SENSOR
SAFETY SIDE
E
M
P
T
Y
1
I
N
H
I
B
I
T
G
N
D
2
I
N
H
I
B
I
T
+
3
N
.
C
.
4
N
.
O
.
5
C
O
M
6
P
O
W
E
R
7
P
O
W
E
R
8
E
M
P
T
Y
1
I
N
H
I
B
I
T
G
N
D
2
I
N
H
I
B
I
T
+
3
N
.
C
.
4
N
.
O
.
5
C
O
M
6
P
O
W
E
R
7
P
O
W
E
R
8
RED
BLACK
WHITE
GREEN
RED
BLACK
WHITE
GREEN
DOOR MTD SENSOR
APPROACH SIDE
DOOR MTD SENSOR
SAFETY SIDE
GREEN
WHITE
BLACK
RED
EAGLE 1
GREEN
WHITE
BLACK
RED
EAGLE 2
RED
BLACK
WHITE
BROWN
BLUE
GREEN
RED
BLACK
WHITE
BROWN
BLUE
GREEN
SEE NOTE # 4
SEE NOTE # 4
SEE NOTE
#2
SEE NOTE #1
LO-LINX GREEN WHITE
Y
ELLO
W
BLUE BROWN
SWING ACT.COM.SAF.STALLSTAL COM.
B E S A M 3 0 0 13 12 11 15 , 17 16 ,18
BESAM M/P 3 4 9 5 13
DOM YELLOW GREY BLUE PURPLE GREY
GT 300/400 BLACK RED WHITE WHITE RED
GT MAG 6 BLACK 5 RED 4 WHITE 3 VIOLET 5 RED
HORTON 4190 2 3, 6, 8 4 10 3, 6, 8
HUNTER ACT. RTN SAF. 1 SAF. 2 RTN
KM K GREEN WHITE RED YELLOW WHITE
STANLEY "L" ORANGE YELLOW RED BLUE YELLOW
STANLEY M/P 2 1, 8 7 7 1, 8
STANLEY 521 TB4-5 TB4-4 TB4-8 TB4-10 TB4-9
TORM AX TDA 2 1 ,3, 6, 8 8 & 9 7 1, 3, 6, 8
COM
N/O
SEE NOTE #3
SEE NOTE # 4
-
1
-
2
-
3
-
4
-
5
-
6
-
7
BEA Stanley Dip Switch I User manual
- Type
- User manual
- This manual is also suitable for
Introducing the BEA Stanley Dip Switch I, a versatile and reliable control system designed to enhance the functionality of your automatic door or gate. With its advanced features and user-friendly design, this dip switch offers a range of possibilities to customize and optimize your access control system. Here are some key capabilities:
-
Multi-functionality: The BEA Stanley Dip Switch I can be programmed for various applications, including push-n-go, latch assist, ratchet function, and stack pressure.
-
Safety and Security: The dip switch allows for the integration of safety beams and magnetic reed switches to ensure safe operation and prevent accidents.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Broan GB5BW Product information
-
-
LockeyUSA GB2900 & GB2985 LINX Operating instructions
-
Monitor Audio RS W12 User manual
-
Linx 160 Owner's manual
-
Simplicity LAWN TRACTOR, BROADMOOR/CONQUEST/PRESTIGE Product information
-
Hager BODYGUARD-T Installation Instructions Manual
-
Eagle Eagle I User manual
-
-
Eagle Access Control Systems Eagle I User manual
