2. FMI
  3. FE-36R

FMI FE-36R Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the FMI FE-36R Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FE-36R
FACE EXTENSION FOR MODEL C36EMW-R SERIES
INSTALLATION INSTRUCTIONS
INSTALLING FACE EXTENSIONS
1.Remove 6 existing screws from front side face assembly as shown in Figure A.
2.Align holes on right face extension (Figure A) with holes on the side of front face assembly so that the faces are ush.
Secure with 3 screws previously removed (follow this step to install left face extension).
3.Secure and ush top face extension with left and right face extensions using 4 sheet metal screws (see Figure B).
4.Secure top face extension to top of face assembly using 4 self-drilling screws (see Figure A). Be sure faces are evenly
ush before drilling.
124179-01
Rev. A
07/08
NOT A UPC
124179 01
DESA Heating, LLC
2701 Industrial Drive
Bowling Green, KY 42101
www.desatech.com
1-866-672-6040
ITEmS NEEdEd:
• Philip screw driver
ITEmS INCLudEd IN kIT:
• Top extension (1)
• Right extension (1)
• Left extension (1)
• Self-drilling screws (4)
• Sheet Metal Screws (4)
Front Face extension will add 6" to the width and 6" to the height of replace face.
LEFT FACE
EXTENSION
FRONT FACE
ASSEMBLY
EXISTING SCREWS FROM
FRONT FACE ASSEMBLY (6)
FIGURE A
FIGURE B
SELF-DRILLING SCREW (4)
TOP FACE EXTENSION
RIGHT FACE
EXTENSION
SHEET METAL SCREW (4)
/