FE-36R

FACE EXTENSION FOR MODEL C36EMW-R SERIES

INSTALLATION INSTRUCTIONS

INSTALLING FACE EXTENSIONS

1.Remove 6 existing screws from front side face assembly as shown in Figure A.

2.Align holes on right face extension (Figure A) with holes on the side of front face assembly so that the faces are ush.

Secure with 3 screws previously removed (follow this step to install left face extension).

3.Secure and ush top face extension with left and right face extensions using 4 sheet metal screws (see Figure B).

4.Secure top face extension to top of face assembly using 4 self-drilling screws (see Figure A). Be sure faces are evenly

DESA Heating, LLC

2701 Industrial Drive

Bowling Green, KY 42101

www.desatech.com

1-866-672-6040

ITEmS NEEdEd:

• Philip screw driver

ITEmS INCLudEd IN kIT:

• Top extension (1)

RIGHT FACE