2. Intellinet
  3. High Power Wireless G Access Point

Intellinet High Power Wireless G Access Point, 503082 User manual

  • Hello! I am an AI chatbot trained to assist you with the Intellinet High Power Wireless G Access Point User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
High Powered Wireless G Access Point (503082)
Repeater and Bridge Mode
Root AP Settings
Connect Root AP directly to the router with Ethernet cable
Click Wireless-----Click Basic Settings
Choose Repeater Mode (Bridge Mode)
Set SSID (Root AP)
Set Channel
Click Apply Changes
WDS Settings
Click Wireless------Click WDS Settings
Enable WDS
Enter MAC address of AP devices you wish to repeat.
**AP model 503082 requires both the Wireless MAC and the LAN MAC**
Root AP System Tab
Click Status ------ Click System
TCP Settings
Click TCP/IP
Enter network IP address for the AP
Default Gateway should match the IP address of your router
DHCP: Enable or Disable
Apply Changes (Please note the IP address before
selecting Apply Changes)
Repeater AP Device
Click Wireless ------- Click Basic Settings
Choose Repeater Mode or Bridge Mode
Set SSID (AP2) does not have to match the SSID of the Root AP.
Set Channel: Must match the Channel of the Root AP
Click Apply Changes
WDS Settings
Click Wireless ------ Click WDS Settings
Enable WDS
Enter MAC address of Root AP you wish to repeat the signal from
****AP model 503082 requires both the Wireless MAC and
the LAN MAC
TCP Settings
Click TCP/IP
Enter network IP address for the AP
Default Gateway should match the IP address of your router
DHCP: Enable or Disable
Repeater System Settings
Click Status
/