Miele 28648050 USA is a 30" Downdraft Ventilation Hood that helps to remove smoke, odors, and grease from the air while cooking. It has a powerful internal blower that can be mounted in various positions to accommodate your kitchen layout. The hood also features a sleek design that will complement any kitchen décor.
Here are some of the benefits of using the Miele 28648050 USA:
- Improved air quality: The hood helps to remove smoke, odors, and grease from the air, which can improve the air quality in your kitchen. This is especially beneficial for people with allergies or asthma.
- Reduced condensation: The hood helps to reduce condensation on your windows and walls, which can prevent mold and mildew growth.
Miele 28648050 USA is a 30" Downdraft Ventilation Hood that helps to remove smoke, odors, and grease from the air while cooking. It has a powerful internal blower that can be mounted in various positions to accommodate your kitchen layout. The hood also features a sleek design that will complement any kitchen décor.
Here are some of the benefits of using the Miele 28648050 USA:
- Improved air quality: The hood helps to remove smoke, odors, and grease from the air, which can improve the air quality in your kitchen. This is especially beneficial for people with allergies or asthma.
- Reduced condensation: The hood helps to reduce condensation on your windows and walls, which can prevent mold and mildew growth.
Product Dimensions Page 1 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
Location Codes
1 DAG 500 Internal blower – The blower box can be mounted in such a way that the
vent collar is aligned to the left, the right, downwards or towards the rear, as desired.
2 Connection plate when using the DAG 1000 external blower. The blower or the
connection plate can also be mounted in the same position on the rear of the
Appliance.
X = Distance to the rear of the cabinet or wall. Must be a minimum of ½” (13 mm).
Exhaust duct connection diameters
DA 6480, DA 6490 with internal blower DA 6480, DA 6490 with external blower
DAG 500 Internal Blower - 6” Ø (150 mm) DAG 1000 External Blower- 10” Ø (254 mm)
Item 28648050USA – DA 6480 Shipping weight 44 lbs (20 kg)
Shipping dimensions 31 5/16” (795 mm) L x 8 1/4” (210 mm) W x 33 1/16” (840 mm) H
Item 28649050USA – DA 6490 Shipping weight 50.7 lbs (23 kg)
Shipping dimensions 37“ (940 mm) L x 8 1/4” (210 mm) W x 33 1/16” (840 mm) H
The hood requires a 120 VAC, 60 Hz, 15 A hard wire connection to the terminal.
All electrical work should be performed by a qualified electrician.
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 05152012
Cut-out Dimensions Page 2 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
Location Codes
A – Cooktop Overhang
B – Cooktop Minimum Width
DA6480: 28” (711 mm)
DA6490: 34” (864 mm)
C – Vented rear
D – Feed the power cord and control cable when using an external blower downwards or to the rear.
Exhaust duct connection diameters
DA 6480, DA 6490 with internal blower DA 6480, DA 6490 with external blower
DAG 500 Internal Blower - 6” Ø (150 mm) DAG 1000 External Blower- 10” Ø (254 mm)
Notes:
Not to be used with Miele CombiSet units
The specified dimensions minimum cut-out dimensions must be observed.
If an oven is installed in front of the ventilation system ensure that all installation dimensions and guidelines regarding
If
an
oven
is
installed
in
front
of
the
ventilation
system
,
ensure
that
all
installation
dimensions
and
guidelines
regarding
ventilations systems.
Be aware of kitchen cabinets, back splashes and/or racks in the area of the ventilation system and the cooktop. Ensure
that the area where the vent rises is free of obstacles.
Make sure that any required minimum distance between the front edge of the countertop and the front edge of the
cooktop is maintained.
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 05152012
Product and Cut-out Dimensions Page 3 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
Exhaust air ducting using the DAG 500 internal blower, installed on the front of the appliance [vent duct 6” ø (150 mm)]
A to the left or right
B
downwards
B
downwards
C to the rear
If the blower is being installed at the rear of the appliance, a cut-out must be made in the rear of the cabinet or wall
where it can be mounted and appropriate clearances must be maintained behind the cabinet.
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 05152012
Product and Cut-out Dimensions Page 4 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
DAG 500 Internal Blower
Shown with interior
mounted DAG 500
vent motor
DAG 500 mounted in front of the exhaust system. DAG 500 mounted behind the exhaust system.
DAG 500 Internal Blower exhaust diameter- 6” Ø (150 mm) Note that the blower must be accessible to install the
venting ductwork
Maximum load with interior
mounted
Maximum
load
with
interior
-
mounted
DAG 500 vent motor…………………420 W
Item 28996319USA – DAG 500 Shipping weight 23 lbs (10.5 kg)
Shipping dimensions 24“ (610 mm) L x 18 5/16” (465 mm) W x 18 1/8” (460 mm) H
All installations must be done in accordance with local codes.
Drawin
g
is not to scale S
p
ecification Sheets OJS 05152012
Product and Cut-out Dimensions Page 5 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
DAG 1000 External Blower
Installation using the
DAG 1000 external blower
connection plate
Exhaust air ducting to the front
Exhaust air ducting to the rear
Exhaust
air
ducting
to
the
front
.
Exhaust
air
ducting
to
the
rear
.
Note that the back must be accessible for installation
of the venting ductwork
If using the external blower, install a connection cable between the ventilation system
and the external blower.
DAG 1000 External Blower exhaust diameter- 10” Ø (254 mm)
Maximum Load
with exterior-mounted
DAG 1000 vent motor……………….210 W
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 05152012
Product Dimensions Page 6 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
DAG 1000 External Blower
¾
Conduit Size
¾
Conduit
Size
10” ø
DAG 1000 External Blower exhaust diameter- 10” Ø (254 mm)
Item 28996291USA – DAG 1000 Shipping weight 55 lbs (25 kg)
Shipping dimensions 36 1/4“ (920 mm) L x 13 1/4” (336 mm) W x 30” (762 mm) H
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 05152012
Product and Cut-out Dimensions Page 7 of 7
DA 6480 30
”
Downdraft Ventilation Hood
DA
6480
30
Downdraft
Ventilation
Hood
DA 6490 36” Downdraft Ventilation Hood
Downdraft Recirculation Kit DUU 2900
2
1
2
3
Details
Item 09162160
Cabinet cut-out 15 7/16” x 8 13/16” (392 mm x 224 mm)
To be vented out the sides or base of cabinet.
5 7/8” Vent port can be mounted in 3 positions
Discharge Grill exhaust is 180°
Two - Item number 09162160 - DKF 18-1 Charcoal filters included
All installations must be done in accordance with local codes.
Drawin
g
is not to scale S
p
ecification Sheets OJS 05152012
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Miele 28648050 USA is a 30" Downdraft Ventilation Hood that helps to remove smoke, odors, and grease from the air while cooking. It has a powerful internal blower that can be mounted in various positions to accommodate your kitchen layout. The hood also features a sleek design that will complement any kitchen décor.
Here are some of the benefits of using the Miele 28648050 USA:
- Improved air quality: The hood helps to remove smoke, odors, and grease from the air, which can improve the air quality in your kitchen. This is especially beneficial for people with allergies or asthma.
- Reduced condensation: The hood helps to reduce condensation on your windows and walls, which can prevent mold and mildew growth.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
GE ZV36TSF3SS Owner's manual
-
Wolf 1100 User manual
-
Wolf CTWH30 Operating instructions
-
Thermador VTN1000F Download Design Guide Volume 4 - 2014
-
Wolf CT15I/S Specification
-
-
Faber IBDD600B Installation guide
-
Hyundai Atos 2002 Owner's manual
-
Thermador VCIN36JP User guide
-
Thermador HPIN48HS User guide