Panasonic TXL32EM6Y Operating instructions

Panasonic
Brand
Panasonic
Model
TXL32EM6Y
Category
LCD TVs
Type
Operating instructions
Model No.
TX-L32EM6Y
Operating Instructions
LCD Television
For more detailed instructions, refer to the
Operating Instructions on the CD-ROM.
To view the Operating Instructions on the CD-ROM,
you need a computer equipped with a CD-ROM
drive, and Adobe® Reader® (Version 8.0 or later is
recommended) installed on your computer.
Depending on the operating system or settings on your
computer, the Operating Instructions may not start
automatically.
In this case, open the PDF le under the “MANUAL”
folder manually to view the instructions.
Contents
Be Sure to Read
Safety Precautions ............................................... 2
Maintenance ..........................................................3
Quick Start Guide
Accessories / Options ..........................................4
Identifying Controls .............................................7
Basic Connection ................................................. 9
Auto Setup .......................................................... 11
How to Use Menu Functions .............................14
Specications ..................................................... 21
Licence ................................................................ 22
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and retain them for
future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local Panasonic
dealer for assistance.
English
2
Safety Precautions
Be Sure to Read
Safety Precautions
Warning
Handling the mains plug and lead
● Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause re.)
● Ensure that the mains plug is easily accessible.
● Do not touch the mains plug with a wet hand. This may cause electrical shock.
● Do not use any mains lead other than that provided with this TV. This may cause re or electrical shock.
● Do not damage the mains lead, damaged lead may cause re or electrical shock.
• Do not move the TV with the lead plugged into a socket outlet.
• Do not place a heavy object on the lead or place the lead near a high temperature object.
• Do not twist the lead, bend it excessively or stretch it.
• Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.
• Do not use a damaged mains plug or socket outlet.
• Ensure the TV does not crush the mains lead.
If you nd any
abnormality, remove the
mains plug immediately!
AC 220-240 V
50/60 Hz
Power source / Installation
● This TV is designed for:
• AC 220-240 V, 50/60 Hz
• Table-top use
Do not expose to rain or excessive moisture
● To prevent damage which might result in electric shock
or re, do not expose this TV to rain or excessive
moisture.
● This TV must not be exposed to dripping or splashing
water and objects lled with liquid, such as vases, must
not be placed on top of or above the TV.
Do not remove covers and NEVER modify the
TV yourself
● High voltage components may cause serious electrical
shock, do not remove the rear cover as live parts are
accessible when it is removed.
● There are no user serviceable parts inside.
● Have the TV checked, adjusted or repaired at your
local Panasonic dealer.
Do not place the TV on sloped or unstable
surfaces, and ensure that the TV does not
hang over the edge of the base
● The TV may fall or tip over.
Do not expose the TV to direct sunlight and
other sources of heat
● Avoid exposing the TV to direct sunlight and other
sources of heat.
Do not place foreign objects inside the TV
● Do not allow any objects to drop into the TV through
the air vents as re or electric shock may result.
To prevent the spread of
re, keep candles or other
open ames away from
this product at all times
Use only original dedicated pedestal /
mounting equipment
● Using an unapproved pedestal or other xtures may
make the TV unstable, risking injury. Be sure to ask
your local Panasonic dealer to perform the setup or
installation.
● Use approved pedestals (p. 5) /
wall-hanging brackets (p. 4).
3
Maintenance
Caution
When cleaning the TV, remove the mains plug
● Cleaning an energised TV may cause electric shock.
Remove the mains plug from the wall socket
when the TV is not in use for a prolonged
period of time
● This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected.
Do not expose your ears to excessive volume
from the headphones
● Irreversible damage can be caused.
Do not apply strong force or impact to the
display panel
● This may cause damage resulting in injury.
Do not block the rear air vents
● Adequate ventilation is essential to prevent failure of
electronic components.
● Ventilation should not be impeded by covering the
ventilation openings with items such as newspapers,
table cloths and curtains.
● We recommend that a gap of at least 10 cm is left all
around this TV even when placed inside a cabinet or
between shelves.
● When using the pedestal, keep the space between the
bottom of the TV and the surface where the TV is set.
● If pedestal is not used, ensure the vents in the bottom
of the TV are not blocked.
Minimum distance
10
10 10 10
(cm)
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel, cabinet,
or pedestal by using a soft cloth to clean the dirt or
ngerprints.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth
with clean water or diluted neutral detergent (1 part
detergent to 100 parts water). Wring the cloth and wipe the
surface. Finally, wipe away all the moisture.
Caution
● Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
● Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.
● Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
● The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your ngernail or other hard objects.
● Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to re or electrical shock.
4
Accessories / Options
Quick Start Guide
Quick Start Guide
Accessories / Options
Standard accessories
Remote Control
● N2QAYB000815
VIERA
TOOLS INPUT
TV AV
MENU TEXT STTL GUIDE
EXIT
OK
OPTION
BACK/
RETURN
ASPECT
MUTE
STILL
LAST VIEW
TV
jkl
tuv
abc
mno
wxyz
def
ghi
pqrs
Batteries for the Remote
Control (2)
● (R6AA)
(p. 4)
Pedestal
(p. 5)
Mains Lead
(p. 9)
Assembly screws for
base (4)
(p. 5)
Assembly screws for
pedestal (4)
(p. 5)
Operating Instructions Pan European Guarantee
Card
M4 × 14 M4 × 10
● Accessories may not be placed all together. Take care not to throw them away unintentionally.
● This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Installing / removing remote’s batteries
1 Remove the battery compartment cover. 2 Insert two R6AA batteries (1.5V) according to
“+” and “-” polarity markings inside the battery
compartment, then close the battery compartment
cover.
Pull open
Hook
Note the correct
polarity (+ or -)
Close
Caution
● Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
● Do not mix old and new batteries.
● Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese
batteries).
● Do not use rechargeable (Ni-Cd) batteries.
● Do not burn or break up batteries.
● Do not expose batteries to excessive heat such as sunshine, re or the like.
● Make sure you dispose of batteries correctly.
● Ensure batteries are replaced correctly, there is danger of explosion and re if battery is reversed.
● Do not disassemble or modify the remote control.
5
Accessories / Options
Quick Start Guide
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
● If insufcient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
● If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specied
procedure. (see below)
● Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screws (8) Bracket Base
M4 × 14
Assembly screws for base (4)
M4 × 10
Assembly screws for pedestal (4)
1 Place the TV screen face-down
on a cushioned, clean surface to
protect the screen from damages
and scratches.
2 Assembling the pedestal
Use the assembly screws to fasten
the bracket to the base securely.
● Make sure that the screws are
securely tightened.
● Forcing the assembly screws the
wrong way will strip the threads.
3 Securing the TV
A
Adjust the position of the
pedestal, then insert the
pedestal to the TV screen.
B
Use the assembly screws to
fasten securely.
● Tighten the four assembly screws
loosely at rst, then tighten them
rmly to x securely.
● Carry out the work on a horizontal
and level surface.
M4 × 14
Hold the
bracket not
to fall over
Front
M4 × 10
A
B
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Place the TV screen facing down on a at surface place where maintained with soft materials (such as a blanket)
for protecting the display screen.
2 Remove assembly screws for pedestal with screw driver.
3 Remove the pedestal from the TV.
6
Accessories / Options
Quick Start Guide
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely x the body of the pedestal to the
installation surface.
● The place where the pedestal is to be xed should be thick enough and made of hard material.
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Screw hole
7
Identifying Controls
Quick Start Guide
Identifying Controls
Remote Control
VIERA
TOOLS INPUT
TV AV
MENU TEXT STTL GUIDE
EXIT
OK
OPTION
BACK/
RETURN
ASPECT
MUTE
STILL
LAST VIEW
TV
jkl
tuv
abc
mno
wxyz
def
ghi
pqrs
1
3
5
8
9
4
2
6
7
10
12
11
13
14
15
17
18
16
19
20
21
1 Standby On / Off switch
● Switches TV on or off standby.
● If you cannot turn the TV power on by pressing
button of the remote control, please press
(POWER) button on the back of the TV.
2 VIERA TOOLS
● Displays some special feature icons and accesses
easily.
3 (p. 14)
● Press to access [Picture], [Sound], [Timer], [Setup],
and [Help].
4
● Switches to teletext mode.
5 (Information)
● Displays channel and programme information.
6 Cursor buttons
● Makes selections and adjustments.
7
● Conrms selections and choices.
● Press after selecting channel positions to quickly
change channel.
● Displays the Channel List.
8
● Easy optional setting for viewing, sound, etc.
9 Coloured buttons (red-green-yellow-blue)
● Used for the selection, navigation and operation of
various functions.
10 (Volume up / Volume down)
● Changes volume.
11
● Changes aspect ratio.
12 Numeric buttons
● Changes channel and teletext pages.
● Sets characters.
● When in Standby mode, switches TV on.
13
● Freezes / unfreezes the picture.
● Holds the current teletext page (teletext mode).
14 Input mode selection
● - Switches DVB-C / DVB-T / Analogue
mode.
● - Switches to AV input mode from
[Input Selection] list.
15
● Displays TV guide.
16
● Displays subtitles.
17
● Returns to the normal viewing screen.
18
● Returns to the previous menu / page.
19 (Channel up / Channel down)
● Selects channel in sequence.
20
● Switches sound mute on or off.
21
● Switches to previously viewed channel or input mode.
8
Identifying Controls
Quick Start Guide
Indicator / Control panel
1 C.A.T.S. (Contrast Automatic Tracking System)
sensor
● Senses brightness to adjust picture quality when
[Ambient Sensor] in [Picture] is set to [On].
(p. 15)
2 Remote control signal receiver
● Do not place any objects between the TV remote
control signal receiver and remote control.
3 Power indicator
Red: Standby
Green: On
● The LED blinks when the TV receives a command from
the remote control.
4
● Selects an input source.
● Conrms and enters a selection on the On-Screen
Display Menu.
5 Menu
● Press the button for a while to open or close the
On-Screen Display Menu.
6
● Changes channels.
● Selects item on the On-Screen Display Menu.
INPUT
OK
HOLD
for
MENU
5
4
6
7
8
1 2 3
7
● Changes volume.
● Adjusts the value of the selected item on the
On-Screen Display Menu.
8
(POWER)
● Switches TV on or off.
● To completely turn off the TV, please remove the mains
lead from the wall socket.
Note
● If the TV is turned off by (POWER) button on the back of the TV, you cannot switch TV power on by button of
the remote control. Please press (POWER) button again on the back of the TV to turn the TV on.
Using the On-Screen Displays - Operation guide
Many features available on this TV can be accessed via the On-Screen Display menu.
Operation guide How to use remote control
Operation guide will help you to operate by using the
remote control.
Example: [Sound]
MENU
● Open the main menu
1/2
Mode
Bass
Treble
Equaliser
Balance
Surround
Headphone Volume
Auto Gain Control
Volume CorrectionVolume Correction
Speaker Distance to Wall
Standard
0
0
0
20
O
O
0
Over 30cm
Main Menu
Picture
Sound
Timer
Setup
Help
Access
Select
RETURN
Page up
Page down
Selects your favourite sound mode.
Operation guide
OK
● Move the cursor / select from a
range of options / select the menu
item (up and down only) / adjust
levels (left and right only)
OK
● Access the menu / store settings
after adjustments have been made
or options have been set
BACK/
RETURN
● Return to the previous menu
EXIT
● Exit the menu system and return to
the normal viewing screen
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
• [Off Timer] is active in the [Timer].
• No operation is performed for 4 hours if [Auto Standby] is set to [On].
9
Basic Connection
Quick Start Guide
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Terminals
6
7
8
1 2 3 4 5
1 DIGITAL AUDIO
2 AV 2 (COMPONENT / VIDEO)
3 AV 1 (SCART) (p. 10)
4 Terrestrial terminal (see below)
5 HDMI 1 - HDMI 2 (ARC) (p. 10)
6 CI slot
7 Headphone jack
8 USB port
Connections
Mains lead and aerial
Mains lead
RF cable
Insert the mains plug (supplied) rmly into place.
● When disconnecting the mains lead,
be absolutely sure to disconnect the mains plug at
the socket outlet rst.
Terrestrial aerial
Cable
Antenna, Cable
Mains Lead
AC 220-240 V
50/60 Hz
If the antenna is placed in the wrong location, interference might happen.
Note
● Do not put the Coaxial cable close to the mains lead to avoid noise.
● Do not place the Coaxial cable under the TV.
● To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct terminating
plug are required.
● If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial
socket and the TV.
● Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
● Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.
10
Basic Connection
Quick Start Guide
AV devices
Player
TV
Player
HDMI cable
DVD Recorder / VCR
TV
RF cable
RF cable
Cable
SCART cable
DVD Recorder / VCR
Terrestrial aerial
DVD Recorder / VCR and Set top box
TV
RF cable
RF cable
HDMI cable
SCART cable
SCART cable
DVD Recorder / VCR
Set top box
Terrestrial
aerial
Note
● Please also read the manual of the equipment being connected.
● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
● When using a SCART or HDMI cable, use the fully wired one.
● Check the type of terminals and cable plugs are correct when connecting.
11
Auto Setup
Quick Start Guide
Auto Setup
Search and store TV channels automatically.
● These steps are not necessary if the setup has been completed by your local dealer.
● Please complete connections (p. 9, 10) and settings (if necessary) of the connected equipment before starting
Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
TV
BACK/
RETURN
OK
1
Plug the TV into mains socket and switch On
● Takes a few seconds to be displayed.
● If the red LED shows on the TV, press the Standby On / Off switch on
the remote control.
2
Select the language
Menüsprache
Deutsch
Français
Italiano
Español
Português
Nederlands
English
Dansk
Еλληνικά
Svenska
Norsk
Suomi
Türkçe
Čeština
Slovenčina
Български
Magyar
Polski
Română
Hrvatski
Slovenščina
eesti keel
Srpski
Latviešu
Lietuvių
OK
select
set
3
Select [Home]
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home Shop
OK
change
conrm
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main
features of this TV.
Select [Home] viewing environment to use in your home environment.
● You can return to viewing environment selection screen at the stage of
[Shop] conrmation screen.
1 Return to viewing environment
selection screen
2 Select [Home]
Shop
You have selected shop mode
BACK/
RETURN
Please select your viewing environment.
Home Shop
OK
change
conrm
To change viewing environment later on, you will need to initialise all settings
by accessing [Shipping Condition]. [Shipping Condition]
12
Auto Setup
Quick Start Guide
4
Select your country
● Depending on the country you select, select your
Region or store the Child Lock- PIN number
(“0000” cannot be stored) by following the on screen
instructions.
Country
Germany
Austria
France
Italy
Spain
Portugal
Switzerland
Malta
Andorra
Sweden
Denmark
Norway
Finland
Luxembourg
Belgium
Netherlands
Turkey
Greece
Czech
Poland
Hungary
Slovakia
Slovenia
Croatia
Estonia
Lithuania
Romania
Others
OK
select
set
5
Select the mode you want to tune
TV Signal Selection
Start Auto Setup
DVB-C
DVB-T
Analogue
A
D
OK
select
tune /
skip tuning
: tune (search for the
available channels)
: skip tuning
6
Select [Start Auto Setup]
TV Signal Selection
Start Auto Setup
DVB-C
DVB-T
Analogue
A
D
OK
select
access
● Auto Setup will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the country, area, broadcasting system
and conditions of signal reception.
Auto Setup screen varies depending on the country you select.
1 [DVB-C Network Settings] 2 [DVB-C Auto Setup]
● Depending on the country you select, select your
cable provider beforehand by following the on
screen instructions.
DVB-C Network Settings
Frequency
Network ID
Auto
Auto
Start Auto Setup
OK
select
[Start Auto Setup]
access
jkl
tuv
abc
mno
wxyz
def
ghi
pqrs
Normally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter
[Frequency] and [Network ID] specied by your cable
provider with numeric buttons.
0% 100%
1
2
3
100
100
CBBC Channel
E4
100
DVB-C Auto Setup
Progress
This will take about 3 minutes.
No. Channel Name Type Quality
BBC Radio Wales
Free TV
Free TV
Free TV
Free TV : 3 Pay TV : 0 Radio: 0
Searching
13
Auto Setup
6
3 [DVB-T Auto Setup] 4 [Analogue Auto Setup]
CH 5 69
62
62
62
62
DVB-T Auto Setup
Progress
This will take about 3 minutes.
Free TV : 4 Pay TV : 0 Radio : 0
Searching
100
100
CBBC Channel
E4
100
CH Channel Name Type Quality
BBC Radio Wales
Free TV
Free TV
Free TV
100Cartoon Nwk Free TV
● Depending on the country you select, the
channel selection screen will be displayed after
[DVB-T Auto Setup] if multiple channels have the
same logical channel number. Select your preferred
channel or exit the screen for automatic selections.
CH 29
CH 33 BBC1
CH 2 78 41CC 1
CH Channel Name
This will take about 3 minutes.
Analogue Auto Setup
Scan
Analogue: 2
Searching
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the RF cable, and then, follow the on screen instructions.
14
How to Use Menu Functions
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
MENU
EXIT
OK
TV
BACK/
RETURN
To return to TV at
any time
EXIT
To return to the
previous screen
BACK/
RETURN
To change menu
pages
up
down
1
Display the menu
● Displays the functions that can be set
(varies according to the input signal)
2
Select the menu
Main Menu
Picture
Sound
Timer
Setup
Help
OK
select
access
3
Select the item
1/2
Viewing Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temperature
Adaptive Backlight Control
Normal
Normal
On
On
Main Menu
Picture
Sound
Timer
Setup
Help
Select
Selects your favourite picture mode for each input.
Vivid Colour
70
100
0
50
50
0
OK
select
access
Choose from among alternatives
Colour Temperature
Cool2
Cool1
Normal
Warm1
Warm2
OK
select
store
Adjust using the slide bar
Sharpness 50
Moved
OK
change
conrm
Go to the next screen
Screen Settings
Displays the next screen
OK
access
To reset the settings
● Picture or sound settings only
[Reset to Defaults] in the [Picture] or [Sound]
● To initialise all settings
[Shipping Condition]
15
How to Use Menu Functions
Menu list
Menu
Item Adjustments / Congurations (alternatives)
Picture
Viewing Mode
Selects your favourite picture mode for each input.
[Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Custom]
[Dynamic]:
Improves contrast and sharpness for viewing in a bright room.
[Normal]:
Normal use for viewing in a normal lighting condition.
[Cinema]:
Improves the performance of contrast, black and colour reproduction for
watching movies in a darkened room.
[True Cinema]:
Reproduces the original image quality precisely without any revision.
[Custom]:
Sets the settings for your preferred.
Backlight, Contrast,
Brightness, Colour,
Sharpness
Increases or decreases the levels of these options according to your personal
preference.
Tint Adjusts the picture hue to suit your taste.
Colour Temperature
Sets the overall colour tone of the picture.
[Cool 2] / [Cool 1] / [Normal] / [Warm 1] / [Warm 2]
Vivid Colour Automatically adjusts colours to vivid ones. [Off] / [On]
Adaptive Backlight
Control
Automatically controls luminance level according to the image. [Off] / [On]
Ambient Sensor
Automatically adjusts picture settings according to ambient lighting conditions.
[Off] / [On]
Noise Reduction
Picture Noise Reduction
Reduces unwanted picture noise and icker noise in the contoured parts of a
picture. [Auto] / [Max] / [Mid] / [Min] / [Off]
MPEG Noise Reduction Reduces unwanted MPEG block noise. [Auto] / [Max] / [Mid] / [Min] / [Off]
Advanced Settings
Adaptive Gamma
Control
Automatically controls middle level of luminance according to the image.
Black Expander Gradually adjusts the dark shades of the image.
White Balance Adjusts the white balance for red, green, and blue signal.
Colour
Management
Adjusts the hue, saturation, luminance settings.
Gamma Adjusts the gamma settings.
Reset to Defaults
Press button to reset to the default settings in [Advanced Settings] menu.
16
How to Use Menu Functions
Menu
Item Adjustments / Congurations (alternatives)
Picture
Option Settings
Film Cadence
Mode
Improves vertical resolution for movie images. [Off] / [On]
1080p Pixel Direct
Reproduces the original image quality for 1080p (HDMI) input signal.
[Off] / [On]
● For HDMI input only
HDMI Content
Type
Automatically adjusts picture according to received HDMI content.
[HDMI1] / [HDMI2]: [Graphics] / [Photos] / [Auto] / [Off]
[Auto Detail Setting]: [Photos] / [Graphics] / [Cinema]
● For HDMI input only
HDMI RGB Range
Changes the black level in the image for HDMI input mode.
[HDMI1] / [HDMI2]: [Auto] / [Full] / [Normal]
● For HDMI input only
AV Colour System
Selects optional colour system based on video signals in AV mode.
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
● For AV input only
3D-COMB
Makes still or slow moving pictures more vivid. [Off] / [On]
● Occasionally, while viewing still or slow moving pictures, colour patterning
may be seen. Set to [On] to display sharper and more accurate colours.
● For PAL / NTSC signal reception in TV mode or from composite
Screen Settings
16:9 Overscan
Selects the screen area displaying the image for 16:9 aspect. [Off] / [On]
[On] : Enlarges the image to hide the edge of the image.
[Off] : Displays the image in the original size.
H-size
Switches over horizontal scanning size. [H-Size1] / [H-Size2]
● For TV mode, AV and HDMI input
Zoom
Adjustments
Adjusts the vertical position and size when the aspect is set to [Just],
[Sidecut Just], [Zoom], or [Sidecut Zoom] modes.
Screen Display
Turns the display screen off when you select [Off]. [Off] / [On]
● Press any button (except Mute and Volume) of TV or remote control to turn
the screen [On] again.
Copy Adjustment
Copies picture adjustments to other inputs.
● Only active when [Viewing Mode] is [True Cinema] or [Custom].
Reset to Defaults
Select [Yes], then press button to reset to the default settings.
Sound
Mode
Selects your favourite sound mode. [Standard] / [Music] / [Speech] / [User]
● The selected mode affects all input signals.
[Standard]:
Provides the suitable sound quality for all types of scenes.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
● In [Music] and [Speech] modes, you can adjust [Bass] and [Treble] settings.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite
sound quality.
● For the [User] mode, [Equaliser] will be available in the [Sound] menu instead
of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Bass Adjusts level to enhance or minimise lower, deeper sound output.
17
How to Use Menu Functions
Menu
Item Adjustments / Congurations (alternatives)
Sound
Treble Adjusts level to enhance or minimise sharper, higher sound output.
Equaliser
Adjusts the frequency level to suit your favourite sound quality.
● This function is available when [Mode] is set to [User].
● Select the frequency and change the frequency level by using the cursor
button.
● To enhance the bass sound, raise the level of the lower frequency.
To enhance the treble sound, raise the level of the higher frequency.
● To reset the levels of each frequency to the default settings, select
[Reset to Defaults] by using the cursor button, and then press button.
Balance Adjusts volume level of right and left speakers.
Surround Surround sound settings. [Off] / [On]
Headphone Volume Adjusts the volume of the headphones.
Auto Gain Control
Automatically regulates large sound level differences between channels and
inputs. [Off] / [On]
Volume Correction Adjusts the volume of individual channel or input mode.
Speaker Distance to Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall. [Over 30cm] / [Up to 30cm]
● If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
● If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
MPX
Selects multiplex sound mode (if available)
[Stereo]: Available while mono signal is transmitted.
[Mono]: When stereo signal cannot be received.
● For Analogue mode
Audio Preference
Selects the initial setting for audio tracks. [Auto] / [MPEG]
● For DVB mode only
SPDIF Selection
SPDIF: A standard audio transfer le format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO and
HDMI 2 (ARC) (ARC function) terminals.
● For DVB mode or video contents of [Media player]
[Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output
as Dolby Digital Bitstream. MPEG is output as [PCM].
DTS is output as DTS for video contents of [Media player].
[PCM]: Digital output signal is xed to [PCM].
● ARC (Audio Return Channel) : A function of digital audio output using HDMI
cable
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO and
HDMI 2 (ARC) (ARC function) terminals, if the sound does not synchronise the
image.
● For DVB mode only
HDMI Input
HDMI 1
HDMI 2
Selects to t the input signal. [Digital] / [Analogue]
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
● For HDMI input only
Reset to Defaults
Press button to reset to the default settings.
18
How to Use Menu Functions
Menu
Item Adjustments / Congurations (alternatives)
Timer
Off Timer
Sets the time until the TV automatically goes to Standby mode.
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
Time Zone
Adjusts the time data.
● The time data will be corrected based on GMT.
● Set to [Auto] to adjust the time automatically according to your area.
Auto Standby
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours. [Off] / [On]
● Automatic input switching with the connected equipment affects this
function and time-count will be reset.
● The notication message will appear 3 minutes before going into Standby
mode.
No signal Power off Enables turning the TV off if no signal is detected for 10 minutes. [Off] / [On]
Setup
Eco Navigation Automatically sets the TV to the most suitable energy-saving mode.
Child Lock Locks a channel / AV input to prevent access to it.
DVB-T Tuning Menu
Favourites Edit Creates a list of favourite channels.
Channel List Skips unwanted channels or edits channel list.
Auto Setup Automatically sets the channels supplied.
Manual Tuning Searches for the DVB-T channels manually.
Update Channel List Updates Channel List while keeping your settings.
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries).
New Channel
Message
Selects whether to give a notication message when a new channel is found.
[Off] / [On]
Service
Replacement
Set to [On] to enable a message to switch to the available service
(only available in some countries). [Off] / [On]
Signal Condition Checks the DVB-T signal condition.
Add TV Signal
Adds the TV mode.
● This function is available if you skip any modes to tune in Auto Setup for
rst using the TV.
● To operate, refer to “Auto Setup” operations for rst using the TV.
(p. 11)
19
How to Use Menu Functions
Menu
Item Adjustments / Congurations (alternatives)
Setup
DVB-C Tuning Menu
Favourites Edit Creates a list of favourite channels.
Channel List Skips unwanted channels or edits channel list.
Auto Setup Automatically sets the channels supplied.
Manual Tuning Searches for the DVB-C channels manually.
Update Channel List Updates Channel List while keeping your settings.
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries).
New Channel
Message
Selects whether to give a notication message when a new channel is found.
[Off] / [On]
Service
Replacement
Set to [On] to enable a message to switch to the available service (only
available in some countries). [Off] / [On]
Signal Condition Checks the DVB-C signal condition.
Attenuator Automatically reduces the DVB-C signal to avoid the interference. [Off] / [On]
Add TV Signal
Adds the TV mode.
● This function is available if you skip any modes to tune in Auto Setup for
rst using the TV.
● To operate, refer to “Auto Setup” operations for rst using the TV.
(p. 11)
Analogue Tuning Menu
Channel List Skips unwanted channels or edits channel list.
Auto Setup Automatically sets the channels supplied.
Manual Tuning Searches for the analogue channels manually.
Add TV Signal
Adds the TV mode.
● This function is available if you skip any modes to tune in Auto Setup for
rst using the TV.
● To operate, refer to “Auto Setup” operations for rst using the TV.
(p. 11)
Language
OSD Language Changes language for on-screen displays.
Preferred Audio 1
Preferred Audio 2
Selects the rst and second preferred language for DVB multi audio
(depending on the broadcaster)
Preferred Subtitles 1
Preferred Subtitles 2
Selects the rst and second preferred language for DVB subtitles (depending
on the broadcaster).
Preferred Teletext
Selects the preferred language for DVB teletext service (depending on the
broadcaster).
20
How to Use Menu Functions
Menu
Item Adjustments / Congurations (alternatives)
Setup
Display Settings
Preferred Subtitle
Type
Selects the preferred subtitle type. [Standard] / [Hearing Impaired]
● [Hearing Impaired] provides aids in understanding and enjoyment with
DVB subtitles (depending on the broadcaster).
● [
Preferred Subtitles 1]
/ [
Preferred Subtitles 2
] are given priority.
Teletext Selects the teletext display mode. [TOP] / [List]
Teletext Character
Set
Selects teletext language. [West] / [East1] / [East2]
[West]: English, French, German, Greek, Italian, Spanish, Swedish, Turkish,
etc.
[East1]: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian,
etc.
[East2]: Czech, Hungarian, Lettish, Polish, Rumanian, etc.
Default Guide
Selects the default TV Guide type when the button is pressed. (Only
available in some countries) [Channel List] / [TV Guide]
[TV Guide]: Electronic Programme Guide (EPG) is available.
[Channel List]: The channel list will appear instead of EPG.
Input Labels
Accesses the input labels list to select the label of each input mode or set to
skip unconnected one for easier identication and selection in [TV Selection],
[Input Selection] or banner.
● To skip the input mode, select [Skip].
Banner Display
Timeout
Sets how long the Information banner stays on screen.
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
Radio Mode
Sets the timer for turning off the screen automatically when a radio channel is
selected [Off] / [5] / [10] / [15] / [20] (seconds)
● The sound is active even if the screen turns off. This function is effective in
reducing power consumption when listening to a radio channel.
● Press any buttons except Standby, Volume Up / Down and Sound Mute
buttons to turn the screen on.
● Not valid on Analogue mode
Common Interface Sets to watch encrypted channels, etc.
VIERA Link Settings
VIERA Link Sets to use VIERA Link functions. [Off] / [On]
Power on Link
Sets to use Power on Link function. [Off] / [On]
● This function is available when [VIERA Link] is set to [On].
Power off Link
Sets to use Power off Link function. [Off] / [On]
● This function is available when [VIERA Link] is set to [On].
Standby Power Save
Controls the power consumption in Standby mode of the connected
equipment to reduce the consumption. [Off] / [On]
● This function is available when [VIERA Link] is set to [On] and
[Power off Link] is set to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode
to reduce the power consumption.
[Off] / [On]
● This function is available when [VIERA Link] is set to [On].
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Panasonic TXL32EM6Y Operating instructions

Panasonic
Brand
Panasonic
Model
TXL32EM6Y
Category
LCD TVs
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers