Panasonic TXL32EM6E Operating instructions

Brand: Panasonic

Model: TXL32EM6E

Category: LCD TVs

Type: Operating instructions

Model No.

TX-L32EM6E

Operating Instructions

LCD Television

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and retain them for

future reference.

The images shown in this manual are for illustrative purposes only.

Please refer to Pan European Guarantee Card if you need to contact your local Panasonic

dealer for assistance.

English

Notice for DVB functions

● This TV is designed to meet the standards (as of August, 2012) of DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital

terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services.

Consult your local dealer for availability of DVB-T services in your area.

Consult your cable service provider for availability of DVB-C services with this TV.

● This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C.

● Not all the features are available depending on the country, area, broadcaster, service provider.

● Not all CI modules work properly with this TV. Consult your service provider about the available CI module.

● This TV may not work correctly with CI module that is not approved by the service provider.

● Additional fees may be charged depending on the service provider.

● The compatibility with future services is not guaranteed.

● Check the latest information on the available services at the following website. (English only)

http://panasonic.jp/support/global/cs/tv/

Enjoy your TV!

Transport only in upright position

Panasonic does not guarantee operation and performance

of peripheral devices made by other manufacturers; and

we disclaim any liability or damage arising from operation

and/ or performance from usage of such other maker’s

peripheral devices.

This product is licensed under the AVC patent portfolio

license for the personal and non-commercial use of a

consumer to (i) encode video in compliance with the AVC

Standard (“AVC Video”) and/or (ii) decode AVC Video that

was encoded by a consumer engaged in a personal and

non-commercial activity and/or was obtained from a video

provider licensed to provide AVC Video. No license is

granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA,

LLC. See http://www.mpegla.com.

Contents

Be Sure to Read

Safety Precautions ............................................... 4

Quick Start Guide

Accessories / Options ..........................................6

Identifying Controls .............................................9

Basic Connection ............................................... 11

Auto Setup ..........................................................13

Basic Features

Watching TV ........................................................16

Using TV Guide ...................................................20

Viewing Teletext .................................................22

Watching External Inputs ..................................24

How to Use Menu Functions .............................25

Advanced Features

Retuning from Setup Menu ...............................33

List favourite channels and skip unwanted

channels .............................................................. 35

Child Lock ...........................................................37

Using Common Interface ................................... 39

Shipping Condition ............................................40

Updating the TV Software ..................................41

Using Media Player ............................................42

External Equipment ............................................49

Others

Technical Information ........................................52

FAQs .................................................................... 58

Maintenance ........................................................60

Licence ................................................................ 61

Specications ..................................................... 62

Safety Precautions

Be Sure to Read

Safety Precautions

Warning

Handling the mains plug and lead

● Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause re.)

● Ensure that the mains plug is easily accessible.

● Do not touch the mains plug with a wet hand. This may cause electrical shock.

● Do not use any mains lead other than that provided with this TV. This may cause re or electrical shock.

● Do not damage the mains lead, damaged lead may cause re or electrical shock.

• Do not move the TV with the lead plugged into a socket outlet.

• Do not place a heavy object on the lead or place the lead near a high temperature object.

• Do not twist the lead, bend it excessively or stretch it.

• Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.

• Do not use a damaged mains plug or socket outlet.

• Ensure the TV does not crush the mains lead.

If you nd any

abnormality, remove the

mains plug immediately!

AC 220-240 V

50/60 Hz

Power source / Installation

● This TV is designed for:

• AC 220-240 V, 50/60 Hz

• Table-top use

Do not expose to rain or excessive moisture

● To prevent damage which might result in electric shock

or re, do not expose this TV to rain or excessive

moisture.

● This TV must not be exposed to dripping or splashing

water and objects lled with liquid, such as vases, must

not be placed on top of or above the TV.

Do not remove covers and NEVER modify the

TV yourself

● High voltage components may cause serious electrical

shock, do not remove the rear cover as live parts are

accessible when it is removed.

● There are no user serviceable parts inside.

● Have the TV checked, adjusted or repaired at your

local Panasonic dealer.

Do not place the TV on sloped or unstable

surfaces, and ensure that the TV does not

hang over the edge of the base

● The TV may fall or tip over.

Do not expose the TV to direct sunlight and

other sources of heat

● Avoid exposing the TV to direct sunlight and other

sources of heat.

Do not place foreign objects inside the TV

● Do not allow any objects to drop into the TV through

the air vents as re or electric shock may result.

To prevent the spread

of re, keep candles

or other open ames

away from this product

at all times

Use only original dedicated pedestal /

mounting equipment

● Using an unapproved pedestal or other xtures may

make the TV unstable, risking injury. Be sure to ask

your local Panasonic dealer to perform the setup or

installation.

● Use approved pedestals (p. 7) /

wall-hanging brackets (p. 6).

Safety Precautions

Caution

When cleaning the TV, remove the mains plug

● Cleaning an energised TV may cause electric shock.

Remove the mains plug from the wall socket

when the TV is not in use for a prolonged

period of time

● This TV will still consume some power even in the Off

mode, as long as the mains plug is still connected.

Do not expose your ears to excessive volume

from the headphones

● Irreversible damage can be caused.

Do not apply strong force or impact to the

display panel

● This may cause damage resulting in injury.

Do not block the rear air vents

● Adequate ventilation is essential to prevent failure of

electronic components.

● Ventilation should not be impeded by covering the

ventilation openings with items such as newspapers,

table cloths and curtains.

● We recommend that a gap of at least 10 cm is left all

around this TV even when placed inside a cabinet or

between shelves.

● When using the pedestal, keep the space between the

bottom of the TV and the surface where the TV is set.

● If pedestal is not used, ensure the vents in the bottom

of the TV are not blocked.

Minimum distance

10 10 10

(cm)

Accessories / Options

Quick Start Guide

Accessories / Options

Standard accessories

Remote Control

● N2QAYB000815

VIERA

TOOLS INPUT

TV AV

MENU TEXT STTL GUIDE

EXIT

OPTION

BACK/

RETURN

ASPECT

MUTE

STILL

LAST VIEW

jkl

tuv

abc

mno

wxyz

def

ghi

pqrs

Batteries for the Remote

Control (2)

● (R6AA)

(p. 8)

Pedestal

(p. 7)

Mains Lead

(p. 11)

Assembly screws for

base (4)

(p. 7)

Assembly screws for

pedestal (4)

(p. 7)

Operating Instructions Pan European Guarantee

Card

M4 × 14

M4 × 10

● Accessories may not be placed all together. Take care not to throw them away unintentionally.

● This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by

young children accidentally. Keep these parts out of reach of young children.

Optional accessories

Please contact your local Panasonic dealer to purchase the recommended optional accessories.

For additional details, please read the manual of the optional accessories.

Wall-hanging bracket

Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.

● Holes for wall-hanging bracket installation

Depth of screw:

TX-L32EM6E

Minimum 16 mm

Maximum 21 mm

Diameter: M6

Screw for xing the TV onto the wall-hanging

bracket (not supplied with the TV)

● Make sure that all screws are securely

tightened.

(View from the side)

Rear of the TV

● TX-L32EM6E

a: 200 mm

b: 100 mm

Warning

● Always be sure to ask a qualied technician to carry out set up. Incorrect tting may cause equipment to fall, resulting

in injury and product damage. Any damage resulting from not having a professional installer mount your unit will void

your warranty.

● When any optional accessories or wall hanging brackets are used, always ensure that the instructions provided are

followed fully.

● Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high

heat. Doing so may warp or damage plastic cabinet parts.

● Take care when xing wall brackets to the wall. Wall mounted equipment shall not be grounded by metal within the

wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.

● To prevent fall and injury, remove the TV from its xed wall position when no longer in use.

Accessories / Options

Quick Start Guide

Attaching / removing the pedestal

Warning

Do not disassemble or modify the pedestal.

● Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than the one provided with this TV.

● Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic

dealer immediately.

During set-up, make sure that all screws are securely tightened.

● If insufcient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong

enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Ensure that the TV does not fall over.

● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury

may result.

Two or more people are required to install and remove the TV.

● If two or more people are not present, the TV may be dropped, and personal injury may result.

When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specied

procedure. (see below)

● Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.

Assembly screws (8) Bracket Base

M4 × 14

Assembly screws for base (4)

M4 × 10

Assembly screws for pedestal (4)

1 Place the TV screen face-down

on a cushioned, clean surface to

protect the screen from damages

and scratches.

2 Assembling the pedestal

Use the assembly screws to fasten

the bracket to the base securely.

● Make sure that the screws are

securely tightened.

● Forcing the assembly screws the

wrong way will strip the threads.

3 Securing the TV

Adjust the position of the

pedestal, then insert the

pedestal to the TV screen.

Use the assembly screws to

fasten securely.

● Tighten the four assembly screws

loosely at rst, then tighten them

rmly to x securely.

● Carry out the work on a horizontal

and level surface.

M4 × 14

Hold the

bracket not

to fall over

Front

M4 × 10

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Place the TV screen facing down on a at surface place where maintained with soft materials (such as a blanket)

for protecting the display screen.

2 Remove assembly screws for pedestal with screw driver.

3 Remove the pedestal from the TV.

Accessories / Options

Quick Start Guide

Preventing the TV from falling over

Using the fall-prevent screw hole and a screw (commercially available), securely x the body of the pedestal to the

installation surface.

● The place where the pedestal is to be xed should be thick enough and made of hard material.

Screw (not supplied)

Diameter: 3 mm

Length: 25 - 30 mm

Screw hole

Installing / removing remote's batteries

1 Remove the battery compartment cover. 2 Insert two R6AA batteries (1.5V) according to

“+” and “-” polarity markings inside the battery

compartment, then close the battery compartment

cover.

Pull open

Hook

Note the correct

polarity (+ or -)

Caution

● Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

● Do not mix old and new batteries.

● Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese

batteries).

● Do not use rechargeable (Ni-Cd) batteries.

● Do not burn or break up batteries.

● Do not expose batteries to excessive heat such as sunshine, re or the like.

● Make sure you dispose of batteries correctly.

● Ensure batteries are replaced correctly, there is danger of explosion and re if battery is reversed.

● Do not disassemble or modify the remote control.

Identifying Controls

Quick Start Guide

Identifying Controls

Remote Control

VIERA

TOOLS INPUT

TV AV

MENU TEXT STTL GUIDE

EXIT

OPTION

BACK/

RETURN

ASPECT

MUTE

STILL

LAST VIEW

jkl

tuv

abc

mno

wxyz

def

ghi

pqrs

1 Standby On / Off switch

● Switches TV on or off standby.

● If you cannot turn the TV power on by pressing

button of the remote control, please press

(POWER) button on the back of the TV.

2 VIERA TOOLS (p. 43)

● Displays some special feature icons and accesses

easily.

3 (p. 25)

● Press to access [Picture], [Sound], [Timer], [Setup],

and [Help].

4 (p. 22)

● Switches to teletext mode.

5 (Information) (p. 17)

● Displays channel and programme information.

6 Cursor buttons

● Makes selections and adjustments.

● Conrms selections and choices.

● Press after selecting channel positions to quickly

change channel.

● Displays the Channel List.

8 (p. 18)

● Easy optional setting for viewing, sound, etc.

9 Coloured buttons (red-green-yellow-blue)

● Used for the selection, navigation and operation of

various functions.

10 (Volume up / Volume down)

● Changes volume.

11 (p. 19)

● Changes aspect ratio.

12 Numeric buttons

● Changes channel and teletext pages.

● Sets characters.

● When in Standby mode, switches TV on.

● Freezes / unfreezes the picture. (p. 17)

● Holds the current teletext page (teletext mode).

(p. 22)

14 Input mode selection

● - Switches DVB-C / DVB-T / Analogue

mode. (p. 16)

● - Switches to AV input mode from

[Input Selection] list. (p. 24)

● Displays TV guide. (p. 20)

16 (p. 17)

● Displays subtitles.

● Returns to the normal viewing screen.

● Returns to the previous menu / page.

19 (Channel up / Channel down)

● Selects channel in sequence.

● Switches sound mute on or off.

21 (p. 19)

● Switches to previously viewed channel or input mode.

Identifying Controls

Quick Start Guide

Indicator / Control panel

1 C.A.T.S. (Contrast Automatic Tracking System)

sensor

● Senses brightness to adjust picture quality when

[Ambient Sensor] in [Picture] is set to [On].

(p. 26)

2 Remote control signal receiver

● Do not place any objects between the TV remote

control signal receiver and remote control.

3 Power indicator

Red: Standby

Green: On

● The LED blinks when the TV receives a command from

the remote control.

● Selects an input source.

● Conrms and enters a selection on the On-Screen

Display Menu.

5 Menu

● Press the button for a while to open or close the

On-Screen Display Menu.

● Changes channels.

● Selects item on the On-Screen Display Menu.

INPUT

HOLD

for

1 2 3

● Changes volume.

● Adjusts the value of the selected item on the

On-Screen Display Menu.

(POWER)

● Switches TV on or off.

● To completely turn off the TV, please remove the mains

lead from the wall socket.

Note

● If the TV is turned off by (POWER) button on the back of the TV, you cannot switch TV power on by button of

the remote control. Please press (POWER) button again on the back of the TV to turn the TV on.

Using the On-Screen Displays - Operation guide

Many features available on this TV can be accessed via the On-Screen Display menu.

 Operation guide  How to use remote control

Operation guide will help you to operate by using the

remote control.

Example: [Sound]

● Open the main menu

1/2

Mode

Bass

Treble

Equaliser

Balance

Surround

Headphone Volume

Auto Gain Control

Volume CorrectionVolume Correction

Speaker Distance to Wall

Standard

O

Over 30cm

Main Menu

Picture

Sound

Timer

Setup

Help

Change

Select

RETURN

Page up

Page down

Selects your favourite sound mode.

Operation guide

● Move the cursor / select from a

range of options / select the menu

item (up and down only) / adjust

levels (left and right only)

● Access the menu / store settings

after adjustments have been made

or options have been set

BACK/

RETURN

● Return to the previous menu

EXIT

● Exit the menu system and return to

the normal viewing screen

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:

• [Off Timer] is active in the [Timer].

• No operation is performed for 4 hours if [Auto Standby] is set to [On].

Basic Connection

Quick Start Guide

Basic Connection

External equipment and cables shown are not supplied with this TV.

Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

Terminals

1 2 3 4 5

1 DIGITAL AUDIO (p. 50)

2 AV 2 (COMPONENT / VIDEO)

(p. 49, 50)

3 AV 1 (SCART) (p. 12, 49)

4 Terrestrial terminal (see below)

5 HDMI 1 - HDMI 2 (ARC) (p. 12, 49)

6 CI slot (p. 39)

7 Headphone jack (p. 50)

8 USB port (p. 42)

Connections

Mains lead and aerial

Mains lead

RF cable

Insert the mains plug (supplied) rmly into place.

● When disconnecting the mains lead,

be absolutely sure to disconnect the mains plug at

the socket outlet rst.

Terrestrial aerial

Cable

 Antenna, Cable

 Mains Lead

AC 220-240 V

50/60 Hz

If the antenna is placed in the wrong location, interference might happen.

Note

● Do not put the Coaxial cable close to the mains lead to avoid noise.

● Do not place the Coaxial cable under the TV.

● To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct terminating

plug are required.

● If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial

socket and the TV.

● Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for

your particular area and the accessories required.

● Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs

incurred, are the responsibility of you, the customer.

Basic Connection

Quick Start Guide

AV devices

 Player

Player

HDMI cable

 DVD Recorder / VCR

RF cable

Cable

SCART cable

DVD Recorder / VCR

Terrestrial aerial

 DVD Recorder / VCR and Set top box

RF cable

HDMI cable

SCART cable

DVD Recorder / VCR

Set top box

Terrestrial

aerial

Note

● Please also read the manual of the equipment being connected.

● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

● When using a SCART or HDMI cable, use the fully wired one.

● Check the type of terminals and cable plugs are correct when connecting.

Auto Setup

Quick Start Guide

Auto Setup

Search and store TV channels automatically.

● These steps are not necessary if the setup has been completed by your local dealer.

● Please complete connections (p. 11, 12) and settings (if necessary) of the connected equipment before starting

Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.

BACK/

RETURN

Plug the TV into mains socket and switch On

● Takes a few seconds to be displayed.

● If the red LED shows on the TV, press the Standby On / Off switch on

the remote control.

Select the language

Menüsprache

Deutsch

Français

Italiano

Español

Português

Nederlands

English

Dansk

Еλληνικά

Svenska

Norsk

Suomi

Türkçe

Čeština

Slovenčina

Български

Magyar

Polski

Română

Hrvatski

Slovenščina

eesti keel

Srpski

Latviešu

Lietuvių

select

set

Select [Home]

Select [Home] viewing environment to use in your home environment.

Please select your viewing environment.

Home Shop

change

conrm

 [Shop] viewing environment (for shop display only)

[Shop] viewing environment is the demonstration mode to explain main

features of this TV.

Select [Home] viewing environment to use in your home environment.

● You can return to viewing environment selection screen at the stage of

[Shop] conrmation screen.

1 Return to viewing environment

selection screen

2 Select [Home]

Shop

You have selected shop mode

BACK/

RETURN

Please select your viewing environment.

Home Shop

change

conrm

To change viewing environment later on, you will need to initialise all settings

by accessing [Shipping Condition]. [Shipping Condition] (p. 40)

Auto Setup

Quick Start Guide

Select your country

● Depending on the country you select, select your

Region or store the Child Lock- PIN number

(“0000” cannot be stored) by following the on screen

instructions.

Country

Germany

Austria

France

Italy

Spain

Portugal

Switzerland

Malta

Andorra

Sweden

Denmark

Norway

Finland

Luxembourg

Belgium

Netherlands

Turkey

Greece

Czech

Poland

Hungary

Slovakia

Slovenia

Croatia

Estonia

Lithuania

Romania

Others

select

set

Select the mode you want to tune

TV Signal Selection

Start Auto Setup

DVB-C

DVB-T

Analogue

select

tune /

skip tuning

: tune (search for the

available channels)

: skip tuning

Select [Start Auto Setup]

TV Signal Selection

Start Auto Setup

DVB-C

DVB-T

Analogue

select

access

● Auto Setup will start to search for TV channels and store them.

The stored channels and sorted channel order vary depending on the country, area, broadcasting system

and conditions of signal reception.

Auto Setup screen varies depending on the country you select.

1 [DVB-C Network Settings] 2 [DVB-C Auto Setup]

● Depending on the country you select, select your

cable provider beforehand by following the on

screen instructions.

DVB-C Network Settings

Frequency

Network ID

Auto

Start Auto Setup

select

[Start Auto Setup]

access

jkl

tuv

abc

mno

wxyz

def

ghi

pqrs

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter

[Frequency] and [Network ID] specied by your cable

provider with numeric buttons.

0% 100%

100

CBBC Channel

100

DVB-C Auto Setup

Progress

This will take about 3 minutes.

No. Channel Name Type Quality

BBC Radio Wales

Free TV

Free TV : 3 Pay TV : 0 Radio: 0

Searching

Auto Setup

3 [DVB-T Auto Setup] 4 [Analogue Auto Setup]

CH 5 69

DVB-T Auto Setup

Progress

This will take about 3 minutes.

Free TV : 4 Pay TV : 0 Radio : 0

Searching

100

CBBC Channel

100

CH Channel Name Type Quality

BBC Radio Wales

Free TV

100Cartoon Nwk Free TV

● Depending on the country you select, the

channel selection screen will be displayed after

[DVB-T Auto Setup] if multiple channels have the

same logical channel number. Select your preferred

channel or exit the screen for automatic selections.

CH 29

CH 33 BBC1

CH 2 78 41CC 1

CH Channel Name

This will take about 3 minutes.

Analogue Auto Setup

Scan

Analogue: 2

Searching

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the RF cable, and then, follow the on screen instructions.

● To check channel list at-a-glance “Using TV Guide” (p. 20)

● To retune all channels “Retuning from Setup Menu” (p. 33)

● To initialise all settings [Shipping Condition] (p. 40)

Watching TV

Basic Features

Watching TV

STILL

INPUT

MENU STTL

EXIT

OPTION

ASPECT

LAST VIEW

jkl

tuv

abc

mno

wxyz

def

ghi

pqrs

Volume

Turn power on

Select the mode

TV Selection

DVB-C

DVB-T

Analogue

● The selectable modes vary depending

on the stored channels (p. 13).

select

access

● If [TV Selection] menu is not displayed,

press the TV button to switch the mode.

Select a channel

jkl

tuv

abc

mno

wxyz

def

ghi

pqrs

down

● To select a more than two-digit channel

position number, e.g. 399

def

wxyz wxyz

 To select from the Channel List

select channel

watch

All DVB-T Channels

Cartoon Nwk6

BBC Radio Wales

BBC Radio Cymru

BBC ONE Wales

BBC THREE

BBCi

CBBC Channel

Sorting 123...

● To sort channel names in alphabetical order

(red)

● To change the category

(Blue)

Note

● To watch pay-TV “Using Common Interface” (p. 39)

Watching TV

Other useful functions

Display Information banner

Sound mute On

Teletext service available

Multiple audio and video available

[Bad signal]

Poor TV signal quality

Multiple audio available

[Stereo], [Mono]

Audio mode

[Dolby D+], [Dolby D], [HE-AAC]

Dolby Digital Plus, Dolby Digital or

HE-AAC audio track

Multiple video available

1 - 90

Off Timer remaining time

● For settings

(p. 18)

Subtitle service available

Features available / Message meanings

● Also appears when changing a channel

ZDF

HDTV

Change category Info

5 3 2 4

Bad signal Dolby D+

Now

20:00 - 20:550

Coronation Street

All DVB-T Channels

20:35

6 7

Example : DVB

1 Channel position and name

2 Channel type / Encrypted channel

3 Programme

4 Programme Start / Finish time (DVB)

Channel number, etc. (Analogue)

5 Progress time indicator of the selected

programme (DVB)

6 Category

7 Current time

● To hide

EXIT

● Extra information (DVB)

Press twice

(Press again to hide the banner)

● To set display timeout

[Banner Display Timeout]

Display subtitles

Display / hide subtitles (if available)

STTL

● To change the language for DVB (if available) [Subtitle language] (p. 18)

Still

Freeze / unfreeze picture

STILL

Watching TV

Display the selectable settings for the current status

Check or change the current status instantly

OPTION

● To change

select

change

[Multi Video] (DVB mode)

Allows you to select from a group of

multiple videos (if available)

● This setting is not memorized and it

will return to the default setting once

you exit the current programme.

[Multi Audio] (DVB mode)

Allows you to select between

alternative language for sound tracks

(if available)

● This setting is not memorized and it

will return to the default setting once

you exit the current programme.

[Dual Audio] (DVB mode)

● Allows you to select stereo /

monaural (if available)

[Sub Channel] (DVB mode)

● Allows you to select the multifeed

programme - sub channel

(if available)

[Subtitle Language] (DVB mode)

● Allows you to select the language in

which subtitles should appear

(if available)

[Teletext Character Set]

Sets the teletext language font

[Teletext Language] (DVB mode)

● Allows you to select between

alternative language for teletext

(if available)

[MPX] (Analogue mode)

Selects multiplex sound mode

(if available)

[Volume Correction]

Adjusts volume of individual channel or

input mode

Off Timer

Turn the TV to Standby mode automatically after a xed period.

You can set the [Off Timer] via the [Timer].

1 Display the menu

2 Select [Timer]

Main Menu

Picture

Sound

Timer

select

access

3 Select [Off Timer] and set the time

O Timer

90 minutes

75 minutes

60 minutes

45 minutes

30 minutes

15 minutes

O

select

set

● To cancel, set to [Off] or turn the TV off.

● To conrm the remaining time “Display Information banner” (p. 17)

● When the remaining time is within 3 minutes, the remaining time will ash on the screen.

Watching TV

Last view

Switch to previously viewed channel or input mode easily.

LAST VIEW

● Press again to return to the present view.

Aspect

Change the aspect ratio (image size)

ASPECT

Enjoy viewing the image at its optimum size and aspect.

Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose

the aspect ratio automatically according to the “Aspect Control Signal” (p. 52).

 If you would like to change the aspect ratio manually

1 Display [Aspect Selection] list

2 While the list is displayed,

select the mode

ASPECT

Aspect Selection

Auto

16:9

14:9

Just

4:3

4:3 Full

Sidecut Just

Sidecut Zoom

Select

RETURN

Change

Zoom

select

store

[Aspect Selection] list

● You can also change the mode only

using button.

ASPECT

(Press repeatedly until you

reach the desired mode)

[Auto]

The aspect ratio works automatically based on programmes signal format.

For details (p. 52)

[16:9]

Directly displays the image at 16:9

without distortion (anamorphic).

[Zoom]

Displays a 16:9 letterbox or 4:3 image

without distortion.

[14:9]

Displays the image at the standard 14:9

without distortion.

[4:3 Full]

Displays a 4:3 image enlarged

horizontally to t the screen.

● HD signal only

[Just]

Displays a 4:3 image full-screen.

Stretching is only noticeable at the left

and right edges.

[Sidecut Zoom]

Displays a 16:9 letterbox (anamorphic)

image full-screen without distortion.

● HD signal only

[4:3]

Displays the image at the standard 4:3

without distortion.

[Sidecut Just]

Displays a 16:9 letterbox (anamorphic)

image full-screen. Stretching is only

noticeable at the left and right edges.

● HD signal only

Note

● Not available in teletext service.

Using TV Guide

TV Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast

and the forthcoming broadcasts over the next seven days (depending on the broadcasters).

● This function varies depending on the country you select. (p. 13)

● DVB-T and Analogue channels are displayed on the same TV Guide screen. There will be no programme listings for

Analogue channels.

● When this TV is turned on for the rst time, or the TV is switched off for more than a week, it may take some time

before TV Guide is completely shown.

INPUT

EXIT

GUIDE

Select the mode

(p. 16)

View TV Guide

GUIDE

Press again to change the layout ([Landscape] / [Portrait]).

Example:

GUIDE

20:00 - 20:30 DIY SOS : We open in the Battersbys

1 BBC ONE

Select channel

RETURN

+24 hours Prog.Type Category

Info

Change display mode

Page down

TV Guide: Landscape Thu 08.11.2010 16:34

Thu 08.11.2010 All Types All Channels

8:00 9:00

Schleswig-Holst...

Haral... Rucksack artour Leben für 4... MDR...

buten un binnen... Hallo Niedersac... Das Beste aus E...

Hallo Niedersac... Das Beste aus E...

buten un binnen...

118 NDR FS HH

119 NDR FS SH

120 NDR FS MV

122 MDR Sachsen

123 MDR S-Anhalt

124 MDR Thüringen

Time:

117 NDR FS NDSD

Select programme

Page up

View

1 TV Screen

2 TV Guide time

3 [D] : DVB-T

[A] : Analogue

4 Current date and time

5 TV Guide date

6 Programme

7 Channel position and

name

Note

● It may cause slow response, when press the UP/DOWN keys for TV

programme guide. This is due to programme data downloading

 To return to TV

EXIT

 To view the next programme

select

next programme

 To the previous day (DVB mode)

(red)

 To the next day (DVB mode)

(green)

 View details of the programme (DVB mode)

select

(Press again to

return to TV Guide.)

 To change pages

down

Page is loading ...

Panasonic TXL32EM6E Operating instructions

Brand: Panasonic

Model: TXL32EM6E

Category: LCD TVs

Type: Operating instructions

Download PDF

report

Panasonic TXL32EM6E Operating instructions

Panasonic TXL32EM6E Operating instructions

Related papers

Other documents