Origin Storage 1USHL-108 Installation guide

Category
Rack accessories
Type
Installation guide

Origin Storage 1USHL-108 is a versatile and adjustable 1U server rack shelf system designed for mounting equipment in 19-inch racks. Its universal design allows for three basic configurations: 4-post, 2-post centered, and 2-post flush front. With various mounting orientations and multiple hardware options, it accommodates equipment of different widths and depths. The shelf's sturdy construction and included hardware ensure secure and stable installation in various rack types, including square hole, 12-24 threaded, 10-32 threaded, and round hole (non-threaded) racks.

Origin Storage 1USHL-108 is a versatile and adjustable 1U server rack shelf system designed for mounting equipment in 19-inch racks. Its universal design allows for three basic configurations: 4-post, 2-post centered, and 2-post flush front. With various mounting orientations and multiple hardware options, it accommodates equipment of different widths and depths. The shelf's sturdy construction and included hardware ensure secure and stable installation in various rack types, including square hole, 12-24 threaded, 10-32 threaded, and round hole (non-threaded) racks.

RackSolutions
.com
info
@RackSolutions.com
Technical Support & Sales 903.453.0801
4Post and 2Post Universal Shelf
System for 19” Racks
Installation Instructions
Kit P/N: 1USHL-108
Patent(s) Pending
Page 2
Kit Contents
tekcarB tnorF
edilS raeR
tekcarB
flehS
noitatneirO pU-ediS-thgiR
noitatneirO nwoD-ediS-pU
htdiW 2.71
htdiW 7.71
Front Hardware Kit:
(4) 8-32 Flat Head Screws
(4) 8-32 Nuts
(2) Front Brackets
Rear Hardware Kit:
(4) 8-32 Flat Head Screws
(4) 8-32 Brass Shoulder Nuts
(2) Rear Slide Brackets
Rack Hardware Kit:
(8) 10-32 Pan Head Screws
(8) 12-24 Pan Head Screws
(8) 12-24 Cage Nuts
(8) 12-24 Square Nuts
Installation Instructions
Step 1. Right-Side-Up or Up-Side-Down: Equipment narrower than 17.2” should be
mounted with the shelf in the Right-Side-Up orientation (see below). Equipment
17.2” to 17.5” wide must be mounted with the shelf in the Up-Side-Down
orientation (see below). Right-Side-Up mounting is preferred since it saves
vertical rack space. All subsequent instructions assume a Right-Side-Up
orientation.
Step 2. Three Mounting Orientations: This kit can be installed in three basic
configurations:
4Post ..................... Go to Page 3
2Post Centered ..... Go to Page 4
2Post Flush ........... Go to Page 5
4Post Installation Instructions
Page 3
1. Attach the (2) Front Brackets (located as shown below) using the Front Hardware Kit. See Page
6 for details.
2. Attach the (2) Rear Slide Brackets as shown below using the Rear Hardware Kit. See Page 7 for
details. The location of the Rear Slide Brackets depends of your racks mounting depth.
3. Attach the shelf assembly to the rack as shown below using the Rack Hardware Kit. See Page 8
for rack hardware requirements.
Page 4
1. Attach the (2) Front Brackets (located as shown below) using the Front Hardware Kit. See Page
6 for details.
2. Attach the (2) Rear Slide Brackets as shown below using the Rear Hardware Kit. See Page 7 for
details. The location of the Rear Slide Brackets depends of your racks mounting depth.
2Post Center Installation Instructions
3. Attach the shelf assembly to the rack as shown below using the Rack Hardware Kit. See Page 8
for rack hardware requirements.
1. Attach the (2) Front Brackets (located as shown below) using the Front Hardware Kit. See Page
6 for details.
2. Attach the (2) Rear Slide Brackets as shown below using the Rear Hardware Kit. See Page 7 for
details. The location of the Rear Slide Brackets depends of your racks mounting depth.
3. Attach the shelf assembly to the rack as shown below using the Rack Hardware Kit. See Page 8
for rack hardware requirements.
2Post Flush Front Installation Instructions
Page 5
Page 6
1# noitatneirO
2# noitatneirO
Attach the (2) Front Brackets as shown below using (2) 8-32 Flat head Screws and (2)
8-32 Nuts from the Front Hardware Kit bag.
Note 1:
There are two possible orientations for the Front Brackets (see below).
Note 2: There are four multiple locations for the Front Brackets.
Front Bracket Installation Instructions
Rear Bracket Installation Instructions
Page 7
1# noitatneirO
2# noitatneirO
Attach the (2) Rear Slide Brackets as shown below using (2) 8-32 Flat head Screws and
(2) Brass Shoulder Nuts from the Rear Hardware Kit bag.
Note 1: There are two possible orientations for the Rear Slide Brackets.
Note 2: There are multiple locations for the Front Brackets.
RackSolutions
.com
info
@RackSolutions.com
Technical Support & Sales 903.453.0801
Warranty Statement
Innovation First, Inc. warrants our products against defects in material and workmanship for a
period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to
repairing or replacing, at our option, any defective product.
Rack Hardware Kit
The Rack Hardware Kit provides various screws and nuts for the four most common types
of racks.
Square Hole Racks: Install (2) Cage Nuts on each rack post in the top and bottom holes of
the 1U space. Attach with the (larger) 12-24 Screws.
12-24 Threaded Racks: Attach with the (larger) 12-24 Screws. Use (2) screws on each
rack post.
10-32 Threaded Racks: Attach with the (smaller) 10-32 Screws. Use (2) screws on each
rack post.
Round Hole Racks (non-threaded): Attach with the (larger) 12-24 Screws and the square
nuts. Use (2) screws and (2) nuts on each rack post.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Origin Storage 1USHL-108 Installation guide

Category
Rack accessories
Type
Installation guide

Origin Storage 1USHL-108 is a versatile and adjustable 1U server rack shelf system designed for mounting equipment in 19-inch racks. Its universal design allows for three basic configurations: 4-post, 2-post centered, and 2-post flush front. With various mounting orientations and multiple hardware options, it accommodates equipment of different widths and depths. The shelf's sturdy construction and included hardware ensure secure and stable installation in various rack types, including square hole, 12-24 threaded, 10-32 threaded, and round hole (non-threaded) racks.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI