Amiga™ Pure Air II™ Bath
Model: BE30
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Ordering Information
Product Code:
BE30 Amiga™ Pure Air® II Bath
Left Hand
• Accessories / Hardware:
Trim Kit Rotary: #BN21
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 36” W x 20-3/4” H
(1829 mm) L x (914 mm) W x (527 mm) H
Drain/Overflow
A: 16-7/8” (429 mm) B: 14” (356 mm)
Cutout
70” x 34”
Total Weight
791 lb (359 kg) / 44 lb/sq. ft. (215 kg/m
2
)
Operating Gallonage
53 U.S. Gal. (201 Liters)
Product Weight
100 lb (45 kg)
Skirt Mounting
Optional U-Frame
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
Heater
No water heater is available on this unit. Blower has integral air heater.
72''
18''
36''
2''
16'' x 4''*
14''
Blower
12" H x 18" L
Service Access
Optional
Service Access
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
(51 mm)
(Blower)
#FR03 12/06
Product Shown: Amiga™ Pure Air® II Bath Left Hand Shown Model: BE30
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.