Shower Trim
Installation Guide
Dimensions
Measurements
A 2 1/2", 64 mm
B 7 1/2", 191 mm
C 3 9/16", 91 mm
D 3 1/2", 88 mm
E 7 3/8", 187 mm
F
Approx. 77", 1956 mm
G 3 3/8", 85 mm
H 2 13/16", 71 mm
I
(Rough-in)
2 3/8", 60 mm
J
Approx. 42", 1067 mm
A
B
C
G
D
H I
E
F
J
CD0196-3601-352SH-2.0-TRM
Single handle valve trim made from metal materials to be used with Temptrol
pressure balancing valve. Includes single mode shower head (2.0 GPM, 7.6
L/min) with shower arm and ange. All trim components in standard polished
chrome nish.
Model Numbers
• CD0196-3601-352SH-2.0-TRM
Specication
Warranty
Limited Lifetime - to the original end
purchaser in consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty
for compelte warranty information.
Notes:
1) Install blocking to support risers per application.
2) All dimensions measured from nominal rough-in.
3) Dimensions are subject to change without notice.
Parts Assembly
Replacement Parts
Item Description
Part
Number
A
Single mode
shower head
SH-01378
B Escutcheon T-470-NS-ETCH009
C Flat handle assembly T-617
Tools Required
Philips head
screwdriver
3/16" allen wrench
Note: Screw mounting plate flush with wall.
Snap escutcheon onto mounting plate.
A
B
C
Shower Trim
Installation Guide
CD0196-3601-352SH-2.0-TRM
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-962
©2013 Symmons Industries, Inc.
■
www.symmons.com
■
■
ZV-2075 REV 0 06/25/2013
/