Symmons 3602-STN-TRM Installation guide

Category
Faucets
Type
Installation guide
Measurements
A 8 1/2”, 216 mm
B
Rough-in
2 3/8” ± 1/2”, 60 mm ± 13 mm
C 3 1/2”, 89 mm
D 1/2”, 13 mm
E Ref. 12”, 305 mm
F Ref. 77”, 1956 mm
G 8 3/8”, 212 mm
H Ref. 32”, 813 mm
I Ø 2 1/4”, 57 mm
J 7 1/2”, 191 mm
K 3 3/16”, 81 mm
L Ø 2 3/8”, 60 mm
FLOORFLOOR
AA
BB
HH
II
CC
KK
EE
GG
DD
FF
JJ
MM
Model Number Specification
Warranty
Dimensions
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Tub/shower trim includes shower arm with ange,
non-diverter tub spout and 1 mode showerhead with
2.0 gpm (7.6 L/min) ow restrictor. Components made
from metal and nonmetallic materials plated in standard
polished chrome nish.
Tub/Shower Trim
Installation Guide
CDS0181-3602-OTS-2.0-TRM
CDS0181-3602-OTS-2.0-TRM
Tub/Shower Trim
Notes:
1) All dimensions measured from nominal rough-in (see B as reference).
2) Dimensions subject to change without notice.
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800)796-6667 Fax: (800)961-9621
© 2014 Symmons Industries, Inc. www.symmons.com [email protected] ZV-2297 REV 0 112514
Replacement Parts
Item Description Part Number
A Shower Arm 352SH-2.0
B
Shower Arm &
Flange
300
C Handle Assembly T-619
D Set Screw TS-18A
E Dome & Lock Nut T-19/20
F
Diverter Lever
Handle
T-30
G*
Shower
Escutcheon Kit
T-428-NS-K010
H Tub Spout OTS
E
G
G
G
G
B
B
D
F
E
G
H
A
C
1/2”-14 NPT
G
Parts Breakdown
*Note: Apply a bead of silicone around perimeter of shower
escutcheon after installing trim ush with wall.
Tools Required for Installation
Allen wrench
(1/8”)
Phillips head
screwdriver
Plumber tape
Silicone
  • Page 1 1
  • Page 2 2

Symmons 3602-STN-TRM Installation guide

Category
Faucets
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI