Symmons Industries S-3501-CYL-B-BBZ-1.5-TRM Installation guide

Category
Sanitary ware
Type
Installation guide
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations
5 years - for commercial installations
Location:
Dia
Model Numbers
S-3501-CYL-B
Shower System with Symmons Temptrol
®
mixing valve
p/n 4000-BODY
S-3501-CYL-B-TRM
Trim only, valve must be ordered separately
S-4001-BODY
Symmons Temptrol
®
mixing valve without trim
S-4001-X-BODY
Symmons Temptrol
®
valve without trim. Valve includes
integral service stops to allow water shut-o for service
Standards / Certifications
ASME A112.18.1-2005 / CSA B125.1-05
Americans with Disabilities Act (ADA) compliant
Finish Options / Modifications
Append appropriate -sux to model number
-STN
Satin nickel
-
Polished chrome (standard nish)
Options / Modifications
Append appropriate -sux to model number
-IPS
IPS connections: 1/2 inch female IPS
connections on Temptrol
®
mixing valve
(not available with service stops, sux -X)
-X
Service Stops: Temptrol
®
mixing valve
includes integral service stops to allow water
shut-o for service, p/n S-4001-X-BODY
(available when ordering model S-3501-CYL)
-CHKS
Check Stops: Temptrol
®
mixing valve
includes integral check stops
(Requires integral service stop, sux -X
. Used
in installations where a positive shut-o device is
used downstream of mixing valve.)
-REV
Reverse core: Temptrol® mixing valve
with reverse core. (Requires integral service
stop, sux -X . Used in back-to-back system
installations. HOT on the right, COLD on the le)
Delete
Suffix B
Chrome plastic escutcheon
chrome plastic escutcheon is supplied instead
of standard brass escutcheon
-2.0
Flow rate restrictor, 2.0 gpm (7.6 L/min)
-1.5
Flow rate restrictor, 1.5 gpm (5.7 L/min)
-L/HD
Showerhead not included,
Includes mounting bracket and ange
352SH-3
Showerhead is three-mode in place of
standard single mode
-LR -LP
-LR
Lever handle
-LP
Loop style lever handle
Handle Options / Modifications
Append appropriate -sux to model number
Specification Submittal
Shower System
S-3501-CYL-B
Standard Feature Highlights
Shower System with Symmons Temptrol
®
pressure-balancing
mixing valve with adjustable stop screw to limit handle turn
Screwless brass escutcheon (-B)
Cylinder (CYL) style lever handle
Showerhead, single mode #352SH
Mounting bracket and ange for showerhead
Standard ow rate is 2.5 gpm (9.5 L/min)
Optional lower ow rate restrictor available
Polished chrome nish (standard)
Print
Email
Reset Form
2-7/8
±
½"
(72 mm
±
13 mm)
7-3/4" dia
(197 mm)
nished wall
Floor
hot / cold
supply
showerhead
supply
5/8" (16 mm)
2-1/2" dia
(64 mm)
tub spout
supply plug
1/2"-14 NPT
mounting plate
p/n T-177
*
Note (1)
Temptrol
control valve
*
Notes:
(1) Walls for using T-177 mounting plate (MP)
Wall is 1/16" (2 mm) min • 1/2" (13 mm) max
Fiber or acrylic walls (MP required)
Plaster or other type walls 1/2" or less (MP optional)
Protective shield usage (optional)
(2) Dry wall, plaster or other type walls 1/2" or greater
Protective shield is required; snaps on end of valve spindle...
(3) Dimensions subject to change without notice
Wall cutout hole size
3-1/2" (89 mm) min
4" (101 mm) min
approx
27"
(686 mm)
approx
48"
(1219 mm)
Finished wall to rear of valve
3-1/2"
±
1/2" (89 mm
±
13 mm
Finished wall to pipe centerline
2-3/8"
±
1/2" (60 mm
±
13 mm)
*See note (2)
Protective
Shield
p/n T-176
6-5/8" ±1/2"
(167 mm ±13 mm)
5-1/4"
(133 mm)
3"
(76 mm)
Dimensions Dia Shower System, S-3501-CYL-B
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 (800)796-6667, (781)848-2250 Fax: (800)961-9621, (781)664-1300
©2012 Symmons Industries, Inc. Printed in U.S.A. www.symmons.com [email protected] 062112
  • Page 1 1
  • Page 2 2

Symmons Industries S-3501-CYL-B-BBZ-1.5-TRM Installation guide

Category
Sanitary ware
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI