Waterstone 1200C-WB Installation guide

Type
Installation guide
FILTRATION FAUCET
INSTALLATION INSTRUCTIONS
1425H
1425C
1425HC
1700H
1700C
1700HC
1750H
1750C
1750HC
1900H
1900C
1900HC
Filtration Model #s:
1100H
1100C
1100HC
1150H
1150C
1150HC
1200H
1200C
1200HC
1250H
1250C
1250HC
1202H
1202C
1202HC
1252H
1252C
1252HC
1400H
1400C
1400HC
LIFETIME WARRANTY
All Waterstone products manufactured by Waterstone carry a Limited Lifetime Guarantee against functional defect in material or
workmanship in a residential application. Consult with an authorized Waterstone dealer for complete information about our warranty.
WARNING - Since 2005, Waterstone has continued to advise all of our customers against the installation of any brand of in-line water
chiller unit with our faucets. Compressor style chiller units have been proven to arbitrarily exceed the standard household in line pressure
ratings causing the faucet inlet connection line to burst and create the potential for water damage claims in the eld.
USE OF AN IN-LINE INSTALLATION OF A WATER CHILLER WITH A WATERSTONE FAUCET OF ANY KIND WILL VOID OUR WARRANTY.
Waterstone can not and will not be held liable for damages created by a use for which our products were not designed. Waterstone will
only recommend the installation of a water chiller in the vented side (in place of a hot tank) with one of our Hot or Hot & Cold Filtration
faucet models.
For any questions or concerns about your faucet’s warranty, contact Waterstone.
Waterstone Faucets
41180 Raintree Court • Murrieta, CA 92562
1-888-304-0660
www.waterstoneco.com
1 2 3 4
Turn o water supply. Observe all local
plumbing codes.
Inspect waste and water
supplies for signs of damage.
Replace as necessary.
DO NOT use petroleum
based products on this
faucet.
REQUIRED TOOLS: PARTS INCLUDED:
1. Adjustable Wrench
BEFORE YOU BEGIN YOUR INSTALLATION:
INSTALLATION GUIDE
COLD ONLY
HK-CFF-XX*
COLD ONLY FITRATION
HARDWARE KIT
HOT ONLY
HK-FBF-XX*
HOT ONLY FILTRATION
HARDWARE KIT
HOT / COLD
HK-FBF-XX*
HOT/COLD FILTRATION
HARDWARE KIT
*XX represents nish
A
B
C
D
E
F
1.
COUNTER
OR SINK
2. 3. 4.
A
B
C
D
E
F
1.
COUNTER
OR SINK
2. 3. 4.
Thread the nut (F) onto
threaded shroud. Hand
tighten nut to underside of
sink or counter.
Thread the nut (F) onto
threaded shroud. Hand
tighten nut to underside of
sink or counter.
Turn faucet to the desired
handle position. Securely
tighten nut with adjustable
wrench.
Turn faucet to the desired
handle position. Securely
tighten nut with adjustable
wrench.
HOT AND COLD FILTRATION FAUCET INSTALLATION
HOT ONLY FILTRATION FAUCET INSTALLATION
Slide escutcheon plate (A) onto
threaded shroud (B) and up to
base of faucet.
Install escutcheon (A) onto
faucet shank (B).
Fit exible hoses (C, D, E)
through hole on counter or
sink. (No plumbers putty is
required. Vinyl washer seals
base).
Fit exible hoses (C, D, E)
through hole on counter or
sink. (No plumbers putty is
required. Vinyl washer seals
base).
VEN-038-FILT Rev. D
41180 Raintree Court • Murrieta, CA 92562
1-888-304-0660 • 951-304-0520 • www.waterstoneco.com
A
B
1.
2. 3.
4. 5. 6.
COUNTER
OR SINK
C
D
E
G
F
EXTEND 1/4”
Slide large washer (C) and star lock washer
(D) onto shank. Thread the nut (E) and hand
tighten underside of sink or counter.
Turn faucet to the desired handle position.
Securely tighten nut with adjustable
wrench.
Slide compression nut
(F) over end of supply
tube. Slide ferrule (G)
onto end of supply
tube, long tapered
end rst.
Slide ferrule until 1/4”
of tubing is showing
out the end.
COLD ONLY FILTRATION FAUCET INSTALLATION
Slide escutcheon plate (A) onto threaded
shroud (B) and up to base of faucet.
Fit faucet shank through hole on counter
or sink. (No plumbers putty is required.
Vinyl washer seals base).
Insert extended
portion of tubing and
tighten compression
nut to end of faucet
shank with wrench.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Waterstone 1200C-WB Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI