Baumer ZPX1-006 Operating instructions

Type
Operating instructions

Baumer ZPX1-006 compression ring kit is designed for LBFS/LFFS sliding connections. It consists of two PEEK rings that are mounted on the sliding shaft and tightened with a gland nut. The kit helps to prevent leakage and maintain a secure connection between the sensor and the process. It is commonly used in food industry and is harmless according to EU regulations 1935/2004, 10/2011, 2023/2006.

Here are some of the key features and possible use cases of the Baumer ZPX1-006 compression ring kit:

  • Prevents leakage: The kit helps to prevent leakage of liquids or gases between the sensor and the process. This is important in applications where contamination or loss of product must be avoided, such as in the food or pharmaceutical industries.

Baumer ZPX1-006 compression ring kit is designed for LBFS/LFFS sliding connections. It consists of two PEEK rings that are mounted on the sliding shaft and tightened with a gland nut. The kit helps to prevent leakage and maintain a secure connection between the sensor and the process. It is commonly used in food industry and is harmless according to EU regulations 1935/2004, 10/2011, 2023/2006.

Here are some of the key features and possible use cases of the Baumer ZPX1-006 compression ring kit:

  • Prevents leakage: The kit helps to prevent leakage of liquids or gases between the sensor and the process. This is important in applications where contamination or loss of product must be avoided, such as in the food or pharmaceutical industries.
www.baumer.com 1 / 4
1. Clean the sliding shaft
2. Mount the two compression rings as indicated by facing the
smaller part to the sensor tip
3. Insert the shaft into the appropriate process adapter (BCID: A03)
4. Adjust the immersion depth as desired
5. Tighten the gland nut with a torque of 10...15 Nm
Note: Always replace the complete compression ring kit if one or
both rings are permanently deformed or stick to the shaft of
the sliding connection.
EN/2015.10.19 Design and specifications subject to change without notice
Operating instructions: 11109134 00
English
LBFS-xxL2x.x
Sliding connection
Compression ring kit consisting
of two items
Material: PEEK nature
Operating instructions for compression ring kit
ZPX1-006
For LBFS/LFFS sliding connection
Compression ring kit ZPX1-006 for LBFS/LFFS sliding connection
Mounting instructions
LFFS-xx3.x, LFFS-xx4.x
Sliding connection
Declarations
Food EU regulations 1935/2004, 10/2011, 2023/2006
Harmlessness Free of animal-derived ingredients
Facing to
sensor tip
19
8.15
Ø19
www.baumer.com 4 / 4
Baumer A/S
Runetoften 19
8210 Aarhus V
Denmark
Phone: +45 8931 7611
Fax: +45 8931 7610
Compression ring kit
ZPX1-006
For LBFS sliding connection
Operating instructions for compression ring kit
ZPX1-006
For LBFS/LFFS sliding connection
Operating instructions: 11109134 00
For further information please refer to www.baumer.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Baumer ZPX1-006 Operating instructions

Type
Operating instructions

Baumer ZPX1-006 compression ring kit is designed for LBFS/LFFS sliding connections. It consists of two PEEK rings that are mounted on the sliding shaft and tightened with a gland nut. The kit helps to prevent leakage and maintain a secure connection between the sensor and the process. It is commonly used in food industry and is harmless according to EU regulations 1935/2004, 10/2011, 2023/2006.

Here are some of the key features and possible use cases of the Baumer ZPX1-006 compression ring kit:

  • Prevents leakage: The kit helps to prevent leakage of liquids or gases between the sensor and the process. This is important in applications where contamination or loss of product must be avoided, such as in the food or pharmaceutical industries.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI