Aardee ARFB?1000G User manual

Brand: Aardee

Model: ARFB?1000G

Category: Blenders

Type: User manual

ARFB－1000G 2 in 1 Blender

User’s Guide

Thank you for your purchase.

As a new aardee user, please take time to read the

manual to make the best use of your aardee appliance.

Thank you

Team aardee

Table of contents

Before using the appliance 1

Safety measures 1

Before plugging in 2

Diagram 2

Installation 2

How to use the blender buttons 2

How to use the mill 3

Cleaning and maintenance 3

Troubleshooting 4

Recipe 4

Service centre 5

Warranty 5

Before using

Read the instructions properly before using the unit. The blades are sharp so handle with great

care.

1. Remove all packaging including protective foam/cellophane and labels.

2. Dispose the packaging properly and keep it out of reach of children.

3. Ensure that all parts are complete as shown/mentioned on this manual.

Safety Measures

 Use the blender only for its intended domestic purpose.

 This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

 Children should be supervised to ensure that they do not play with the appliance.

 The blender MUST always be turned off before plugging or unplugging from power outlet

for cleaning, servicing or moving purposes.

 Never yank the cord to disconnect from power outlet; you must hold the plug and pull to

disconnect.

 Do not let the cord touch any hot surface. Always keep the cord well kept when not in

use or being used.

 The blender must be used on a flat and stable surface.

 Do not use this appliance outdoors.

 Using attachments or materials not authorized by manufacturer may cause damage to

the unit and harm to the user.

 Make sure the cover is placed when using the blender.

 Avoid having contact with moving parts of the blender.

 Never put non-food and hard items inside the jar.

 Never run the blender empty.

 Never fill the jar with ingredients that are hotter than 60° C.

 To avoid spillage, do not fill the jar above the maximum level.

 Never put your hand or any material inside the jar while appliance is running.

 Always make sure that the blade is securely fitted to the base.

 Avoid touching the blade especially its edges as they are very sharp.

 Never use the mall accessory to process liquid ingredients.

 The mill accessory is not suitable for grinding very hard ingredients such as nutmeg and

ice cubes.

 Do not run the appliance for more than 3 minutes without stopping to avoid exhausting

the blade. If you have run it for 3 minutes, turn off the unit for one minute before using it

again.

 Ingredients whether solid and soft must be sliced into small pieces before putting into the

jar.

 Do not stir the mixture while blender is running. Only use a spatula for stirring.

 If you are processing both liquid and solid ingredients, put the liquid ingredients first then

you add the solid ones while the blender is running.

Before plugging in

 Check that all parts are not damaged. If one is, call or return the unit to the manufacturer

or reseller.

 Clean the jar, clean top cover and measuring cup thoroughly with warm water then dry

it. Do not use strong detergents.

Diagram

Installation

 Place the blender on a clean, flat and dry surface.

 Make sure a wall socket is within a good distance from the blender.

 Always check that the unit is OFF before plugging in.

 Wash the detachable parts of the blender. See Cleaning.

 Put the rubber sealing ring or packing on the inner edge of the blade.

 Mount the jar or blender container on the blade unit and lock it.

 Mount the jar with the blade unit attached on to the motor unit and lock it.

 Put the sliced ingredients into the jar then fix the cover by pressing it down on the jar and

lock it. For the cap, place it in the opening part of the cover.

How to use the buttons on the blender

Always remember to choose the appropriate speed for the mixture you want to process. There

are 3 different speeds you can choose from.

 1 – for light processing of mainly liquid ingredients.

 2 – heavier processing of combined liquid and solid ingredients

 3 – heavy duty processing for solid ingredients

 M – press this button if you wish to run the blender for few moments at a time

 O – press this button to turn off the motor

Tip: If you are not sure which speed to select, just use speed 3. Do not fill the blender container beyond

the maximum level which is 1250 ml.

How to use the mill

 Mill is ideally used to chop and grind dry ingredients.

 Turn the mill container upside down and remove the base of the blade.

 Put the dry ingredients inside the mill container.

 Place the rubber ring on the cutting blades.

 Then put the mill container on the blade unit and lock them together.

 Place the mill container on to the motor unit and attached it properly. The mill is now

ready to be used.

Cleaning & Maintenance

To prolong the lifetime of this blender, please follow these steps. Please be careful in cleaning

the blades.

In cleaning, half-filled the blender with lukewarm water (you can add dishwashing liquid into the

blender if you wish).

Then put the cover and cap in place and push Pulse button.

Empty the jar and remove the container, rubber sealing from the base and rinse with running

water then dry them.

For the cutting blades, wash them with water only or with dishwashing liquid using a sponge or a

toothbrush then rinse and let them dry.

For the motor, use a damp cloth (sponge and soft toothbrush can also be used) to clean the

outside but do not use abrasive cleansers.

Never use water hotter than 60°degrees Celsius and never clean the appliance or its parts using

a dishwasher machine.

Once all parts are dry, reassemble them again according to the steps given on this manual.

Troubleshooting

Please refer to the table below for common queries on this unit as it may save you time and

money. If your concern is not found on the list or your issue persists then kindly call our service

centre.

Problem

Possible causes

Solutions

Motor will not turn

 Power cord is damaged.

 Power supply is not

compatible with the

appliance.

 Check your house’s circuit breaker

and make it is set to ON position.

Blender noise

changes excessively

 The jar is not properly

attached.

The unit is placed on an

uneven surface.

Non-food or extremely hard

items were put inside the jar.

Before mixing anything, make sure

the materials are properly attached.

Ingredients must be sliced or

chopped into pieces.

Always place it on a flat surface.

The motor

overheats

The ratio of water and fruits

are not proportion.

Misuse by making the

blender as a grinder.

 Follow the right proportion of the

ingredients.

 Only use the blender by its

intended function.

Recipe

Fresh Fruit Frozen Yogurt Pops

Prep Time: 10 min

Total Time: 6 hr 10 min

Servings: six

Ingredients

2 containers (6 oz each) Yoplait® Original 99% Fat Free French vanilla yogurt or anything

equivalent in your market

2 cups cut-up fresh fruit such as blueberries, bananas, cherries, grapes, papaya, peaches,

oranges or raspberries

1 tablespoon honey

Procedure

1. Inside the blender, place all ingredients. Cover; blend until smooth.

2. Divide mixture among 6 (5-oz) paper cups. Cover cups with foil; insert craft stick into

centre of each pop. (Or fill ice pop molds according to manufacturer’s directions.) Freeze

about 6 hours or until frozen

Service Center

For repairs, call our hotline or contact the authorized reseller from whom you have

purchased the item.

Warranty

aardee appliances come with a two-year local warranty.

aardee will repair or replace the unit for free provided:

a. it is under the warranty period

b. appliance has not been misused, neglected or damaged

c. it has not been modified

d. it is not second-hand

e. no unauthorized materials/parts are used on the appliance

f. original invoice or warranty card with stamp is presented

Ideas91 FZCO

Tel: +971 4 883 0390, 883 8005

Fax: +971 4 883 8007

PO Box 262979, Dubai, UAE

Aardee ARFB?1000G User manual

Brand: Aardee

Model: ARFB?1000G

Category: Blenders

Type: User manual

Download PDF

report

Aardee ARFB?1000G User manual

Aardee ARFB?1000G User manual

Related papers

Other documents