Hytronik QCB03/ECO is a GST type 6-pole quick connection box for dimming applications. It has 12 luminaire outlets and 2 sensor outlets, and can be used for either 1-channel or 2-channel control. The system rating is 16A, and the rating of each output is 10A.
The QCB03/ECO is a versatile device that can be used in a variety of applications. It is ideal for use in commercial buildings, offices, and schools.
Some of the key features of the QCB03/ECO include:
- Dimmable control applications (DALI-2 or 0/1-10V)
- 12 luminaire outlets + 2 extra sensor outlet for sensor connection
- Luminaire outlet: GST type 6-pole terminal base (L’ or L, N, E, Em, Dim+, Dim-)
Hytronik QCB03/ECO is a GST type 6-pole quick connection box for dimming applications. It has 12 luminaire outlets and 2 sensor outlets, and can be used for either 1-channel or 2-channel control. The system rating is 16A, and the rating of each output is 10A.
The QCB03/ECO is a versatile device that can be used in a variety of applications. It is ideal for use in commercial buildings, offices, and schools.
Some of the key features of the QCB03/ECO include:
- Dimmable control applications (DALI-2 or 0/1-10V)
- 12 luminaire outlets + 2 extra sensor outlet for sensor connection
- Luminaire outlet: GST type 6-pole terminal base (L’ or L, N, E, Em, Dim+, Dim-)
GST type 6-pole terminal base quick connection box for dimming application, with
DALI or 0/1-10V output, 12 luminaire outlets and 2 sensor outlet. Freely switch
between1-channel and 2-channel control. Rating of system 16A, rating of each
output 10A.
• Dimmable control applications (DALI-2 or 0/1-10V)
• 12 luminaire outlets + 2 extra sensor outlet for sensor connection
• Luminaire outlet: GST type 6-pole terminal base (L’ or L, N, E, Em, Dim+, Dim-)
• Sensor outlet: GST type 8-pole terminal base (L, N, E, L’, P1, P2, Dim-, Dim+)
• Black housing and white housing available to choose from
• Freely switch between 1-channel (1 x 8) & 2-channel (2 x 4) control
• Tamper-proof structure design
• Expandable: easy extension to another QCB03/ECO via plug’ n’ play
• Rating of system: Max 16A. Rating of each output: Max 10A
• Flame-retardant material for safety protection
• Five types of installation methods meets different project needs
• Reduce labour hours and labour cost significantly
• Simple and intuitive wiring connections
• Improved safety level during wiring operations
• Clear and clean wiring makes it easy for future maintenance
• Can be supplied with pre-wired cables
3. Your Benefits
4 X M6 screw fixing hole
Reserved hole 6 X Ø 20MM
for BESA box cable entry
BESA box fixing
Channel for mounting rod
Reserved hole 5 X Ø 20MM
for cable entry
Factory default for QCB03/ECO comes with six pre-installed jumper wires. The wire short-connects Push 2, the wire short-connects Push 1, the wire
short-connects Switched L2 and L, the wire short-connects Switched L1 and L tother, the wire short-connects Dim2- and Dim1-, and the jumper wire
short-connects Dim2+ and Dim1+. With these jumper wires, user can freely choose different dimming control method and also freely switch between one-channel
and two-channel control.
1) one-channel / one sensor (1 x 12) DALI dimming -- -- -- remain all jumper wires connected.
2) two-channel / two sensor (2 x 6) dual DALI dimming -- -- -- remain wire & wire , remove wire , , and .
In this case the two channels will be controlled separately (channel 1 is controlled by Dim1+ & Dim1-, and channel 2 is controlled by Dim2- & Dim2+).
3) one-channel /one sensor (1 x 12) 0/1-10V dimming -- -- -- remove wire , remain the other jumper wires connected.
4) two-channel / two sensor (2 x 6) dual 0/1-10V dimming -- -- -- remove all jumper wires.
In this case the two channels will be controlled separately (channel 1 is controlled by Switched L1, Dim1+ & Dim1-, and channel 2 is controlled by Switched L2,
Dim2- & Dim2+).
5) two-channel / two sensor (2 x 6) DALI dimming + on/off switching -- -- -- remain wire , remove the other jumper wires.
In this case the two channels will be controlled separately (channel 1 is controlled by Dim1+ & Dim1-, and channel 2 is controlled by Switched L2).
6) two-channel / one sensor (2 x 6) DALI dimming + on/off switching (eg. HBIR29/2CH)
-- -- -- remain wire , , , remove the other jumper wires.
In this case, the sensor need to be plugged into input 1. The two channels will be controlled separately (channel 1 is controlled by Dim1+ & Dim1-, and channel
2 is controlled by Switched L2).
7) two-channel / two sensor (2 x 6) DALI dimming + 0/1-10V dimming -- -- -- remain wire , remove the other jumper wires.
In this case the two channels will be controlled separately. Channel 1 is controlled by DALI (Dim1+ & Dim1-), and channel 2 is controlled by (0/1--10V) Switched
L2.
This flexible design aims to reduce model inventories for users, and just one box is capable enough to handle different dimming requirements on the project site.
Easy for management, and powerful for usage!
Ø 6
Ø 15
20
277.5
335
233
213
47.5
14.5
Sensor/Controller input
(2 x Sensor Outlet)
Channel 2
(6 x Luminaire Outlet)
Channel 1
(6 x Luminaire Outlet)
input
input
1.Description
2. Key Features
4. Dimensions (mm)
Subject to change without notice. QCB03/ECO-20230713-A0 Subject to change without notice. QCB03/ECO-20230713-A0
Installation and Instruction Manual
QCB03/ECO
GST type 6-pole Quick Connection Box for Dimming Application
L’ (Brown)
E (Yellow/Green)
Em (Black)
N (Blue)
Dim- (White)
Dim+ (Red)
When using DALI dimming
L (Brown)
E (Yellow/Green)
Em (Black)
N (Blue)
Dim- (White)
Dim+ (Red)
When using on/off switching or 0/1-10V dimming
P1P2
Push com Dim2+
Dim2-Dim1-
Dim1+
L L L
Switched L1
Switched L1
N
P2P1
Push com
Em Em N E E
Switched L2
Switched L2
Wire Range: 0.75 - 4.0mm2 (max. 2 x 2.5mm2)
P1P2Dim- Dim+L E L’N
5. Input & Output Terminal Function
Luminaire outlet
Sensor outlet
7. Wiring Diagram
It can work with 4 x M6 screws to fix onto both walls and ceilings. It can be connected with BESA/junction box.
BESA/Junction Box Connection
Marco Tray Mount
It can work with Marco clips steel wire cables tray
Channel Nut Mount
It can work with channel nuts to fasten into the back.
It can be fixed with mounting rods.
Mounting Rods
Surface Mount
8. Wiring & Emergency Test
Local lighting switch and local emergency test switch
Using Local lighting switch for power interruption
Emergency test using central switch
Note: Do not wire across phases.
Local Emergency
Test Switch
Note: 1. A local lighting switch may still be used when there is a central emergency test switch.
2. Do not wire across phases.
Note: 1. A local lighting switch may still be used when there is a central
emergency test switch or when a circuit breaker is used to
interrupt the power.
2. Do not wire across phases.
Factory default setting with a pre-installed jumper wire One-channel (1x12) dimming control
6.Installation methods
Subject to change without notice. QCB03/ECO-20230713-A0 Subject to change without notice. QCB03/ECO-20230713-A0
P2
PUSH COM
P1
EM
SWITCHED L2
SWITCHED L2
N
L
P1
PUSH COM
P2
DIM2-
DIM2+
DIM1-
DIM1+
SWITCHED L1
SWITCHED L1
P2
PUSH COM
P1
EM
SWITCHED L2
SWITCHED L2
N
L
P1
PUSH COM
P2
DIM2-
DIM2+
DIM1-
DIM1+
SWITCHED L1
SWITCHED L1
P2
PUSH COM
P1
EM
SWITCHED L2
SWITCHED L2
N
L
P1
PUSH COM
P2
DIM2-
DIM2+
DIM1-
DIM1+
SWITCHED L1
SWITCHED L1
P2
PUSH COM
P1
EM
SWITCHED L2
SWITCHED L2
N
L
P1
PUSH COM
P2
DIM2-
DIM2+
DIM1-
DIM1+
SWITCHED L1
SWITCHED L1
Multiple boxesCentral Emergency test switch
This product should be installed by a qualified electrician.
Note: 1.
jumper wire
2. Do not wire across phases.
For two-channel (2x4) switching control please
remove the jumper wire.
P2
PUSH COM
P1
EM
SWITCHED L2
SWITCHED L2
N
L
P1
PUSH COM
P2
DIM2-
DIM2+
DIM1-
DIM1+
SWITCHED L1
SWITCHED L1
-
1
-
2
Hytronik QCB03/ECO is a GST type 6-pole quick connection box for dimming applications. It has 12 luminaire outlets and 2 sensor outlets, and can be used for either 1-channel or 2-channel control. The system rating is 16A, and the rating of each output is 10A.
The QCB03/ECO is a versatile device that can be used in a variety of applications. It is ideal for use in commercial buildings, offices, and schools.
Some of the key features of the QCB03/ECO include:
- Dimmable control applications (DALI-2 or 0/1-10V)
- 12 luminaire outlets + 2 extra sensor outlet for sensor connection
- Luminaire outlet: GST type 6-pole terminal base (L’ or L, N, E, Em, Dim+, Dim-)
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Lumos AF10 2 Channel AC Powered 0-10V Fixture Controller Installation guide
-
Crestron electronic Residential Lighting User manual
-
Maxim MAX16839 Quick start guide
-
Lifesmart Two Channel Dimmer Controller(0-10V) Owner's manual
-
ProLights 12x8W RGBWAP / FC high-power PAR LED User manual
-
-
-
Crestron GLPS-SW-FT User manual
-
-
