Hytronik QCB01/BLESID Mesh System User guide

Brand: Hytronik

Model: QCB01/BLESID Mesh System

Type: User guide

• Non-dimmable control applications

• Intelligent control with Bluetooth 5.0 SIG mesh module built in

• 2 types of built-in Bluetooth 5.0 control module to select from

• Detailed Bluetooth system features can be viewed on page 03-09

• Luminaire outlet: Wieland 4-pole terminal base (L’, N, E, Em)

• Black housing and white housing available to choose from

• Tamper-proof structure design

• Expandable: easy extension to another QCB01/BLE wirelessly

• Rating of system: Default rating is 400VA capacitive & 800W resistive

• Max 10A can be supplied as a special version upon request

• Flame-retardant material for safety protection

QCB01/BLE

Your Benets

Key Features

Mechanical Structure & Dimensions

• Five types of installation methods meets different project needs

• Reduce labour hours and labour cost signicantly

• Simple and intuitive wiring connections

• Improved safety level during wiring operations

• Clear and clean wiring makes it easy for future maintenance

• Can be supplied with pre-wired cables

*QCB01/BLE is supplied with white color

housing by default. Black color housing can be

supplied upon request.

Input & Output Terminal Function

L’ (Brown)

E (Yellow/Green)

N (Blue)

Em (Black)

Luminaire outlet

EmEm N

Switched L

N EE L L

Push 1 com

Push 1

Push 2 com

Push 2

Ø6

Ø15

242

123.5

299.5

143.5

Reserved hole 3 x Ø 20mm

for BESA box cable entry

Channel for mounting rod

4 x M6 screw xing hole

BESA box xing

Reserved hole 3 x Ø 20mm

for cable entry

Warning:

• Installation of this device involves connecting it to the mains supply. This work must be carried out

by a specialist in accordance with electrcial technical regulations.

• Disconnect supply before installing.

Wire Range: 0.75 - 4.0mm2 (max. 2 x 2.5mm2)

In the middle of the QCB01/BLE there is a pre-installed Bluetooth 5.0 SIG mesh controller module. We offer 2 types of different controller modules for users to choose

from (HBTD8200S/F or HBTD8200S/F/CA). For each controller module, all the 8 luminaire outlets as one channel (1 x 8). Default rating for this controller module

is 400VA capacitive & 800W resistive. If higher loading capability is required, we can supply a special version with max 10A capability upon request.

8 x Luminaire Outlet

Module code:HBTD8200S/F/CA

(Casambi Enabled)

Module code:HBTD8200S/F

Technical Speciﬁcations

Wiring Diagram (QCB01/BLE-S or QCB01/BLE-SCA)

QCB01/BLE-S:

QCB01/BLE-SCA:

Two built-in module options

QCB01/BLE series

Note: The minimum height for total height of unit is 140mm

(including connectors and cables).

Luminaire plug (HP01)

140

Minimum Installation Height

Max. relative humidity

Mains voltage

Rated load

Storage temperature

Rating of system 10A. Rating of each output 10A

220~240VAC 50/60Hz

20 ~ 90%

-20°C ~ +60°C

Class IIInsulation

Terminal capacity 0.75 - 4.0mm2 (max. 2 x 2.5mm2)

Compliance CE, UKCA

Note: Do not wire across phases.

L N Em

PUSH2

PUSH2 COM

PUSH1

PUSH1 COM

SWITCHED L

N/R

Wiring & Emergency Test

Local lighting switch and local emergency test switch Emergency test using power interruption

Emergency test using central switch

Note: 1. A local lighting switch may still be used when there is a central emergency test switch.

2. Do not wire across phases.

Note: 1. A local lighting switch may still be used when there is a central emergency test switch or when a circuit breaker is used to interrupt the power.

2. Do not wire across phases.

Ceiling Rose/ Conduit Box Connection

L’ (Brown)

E (Yellow/Green)

Em (Black)

N (Blue)

Ceiling rose QCCR01 can be used when there is a need to take power from a conduit box. The installation-friendly design comes with a very spacious termination

space for really easy wirings.

Wirelessly control QCBs!

Connection to Hytronik’s QCB01/BLE Connection to Hytronik’s Motion Sensors

L N

PUSH2

PUSH2 COM

PUSH1

PUSH1 COM

SWITCHED L

Local Lighting Switch

Local Emergency

Test Switch