Rest Rite MFRRBAIBEDQN Operating instructions

Brand
Rest Rite
Model
MFRRBAIBEDQN
Type
Operating instructions

This manual is also suitable for

Platform Bed
Contains One (1) Bed and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the box
surface and verify you have all of the following parts and hardware.
PARTS LIST
HARDWARE LIST
(Continued on back)
K. 40mm Bolt
(2 pcs)
L. 60mm Bolt
(2 pcs)
M. Hex Key
(1 pc)
J. 25mm Bolt
(8 pcs)
I. 20mm Bolt
(12 pcs)
A
A.
Headboard
(1 pc)
B.
Footboard
(1 pc)
E.
Crossbar
(2 pcs)
D.
Center Support
(1 pc)
C. Siderail
(2 pcs)
F.
Support Leg
(4 pcs)
G.
Wood Slat System
(1 pc)
SIZE: QN
Pineal
H.
(4 pcs)
STEP 1 STEP 2
STEP 4
ASSEMBLY INSTRUCTIONS
STEP 3
A
Attach the Siderails (Part C) to the Headboard (Part A) and
Footboard (Part B) using 20 mm bolts (Part I). Screw the
Pineals (Part H) onto the top of the four corner posts of the bed.
Attach the Crossbars (Part E) to the Siderails using two
20mm bolts (Part I) for each Crossbar.
Install the Center Support (Part D) by inserting one 60mm
bolt (Part L) through the Crossbar and Center Support at both
ends of the bed. Then screw the end of each 60mm bolt into
a Support Leg (Part F). Attach the remaining two Support
Legs to the Center Support using the 40mm bolts (Part K).
Roll out the Wood Slat System (Part G) and secure it in place
using the eight 25mm bolts (Part J).
L
K
J
I
J
I
I
  • Page 1 1
  • Page 2 2

Rest Rite MFRRBAIBEDQN Operating instructions

Brand
Rest Rite
Model
MFRRBAIBEDQN
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents