mFi CITY II RAKE LOW PROFILE BED Assembly Instructions

Brand
mFi
Model
CITY II RAKE LOW PROFILE BED
Type
Assembly Instructions
A
C
HARDWARE PACKED IN BOX #2
A.
A
C
C
D
E
C.
B.
B
D.
E.
HEADBOARD SIDERAILS
FOOTBOARD BED SLATS
LEG SUPPORT
HARDWARE BOX
1 PC 2 PCS
1 PC 3 PCS
3 PCS
TOOL REQUIRED :
PHILLIPS HEAD SCREW
DRIVER (NOT PROVIDED)
A
C
STEP 1 :
FIX ONE OF THE SIDERAILS (C) TO THE
HEADBOARD (A) BY SLIDING IN THE HOOK
INSTALLED AT THE END OF THE SIDERAIL
(C) TO THE HEADBOARD (A), AND PUSH THE
SIDERAIL (C) DOWN TO SECURE THE
CONNECTION.
PUSHING
DOWN
PARTS AND FITTING PACKAGING DETAIL
BOX #1 BOX #2
CITY II RAKE LOW PROFILE BED
FULL/QUEEN SIZE
ASSEMBLY INSTRUCTIONS
1
4
2
3
ROUND HEAD
SCREW 15MM
40MM
ALLEN BOLT
WOOD SCREW
Ø8X30MM
ALLEN KEY
12
3
6
1
PCS
PCS
PCS
PC
CITY II RAKE LOW PROFILE BED ASSEMBLED
MODUS
FURNITURE
INTERNATIONAL
MFI
A
A
A
A
BB
B
B
C
C
C
C
C
C2
D
D
D
D
D
D
E
E
D
C
3
4
D
E
STEP 2 :
STEP 5 :
STEP 4 :
STEP 6 :
STEP 3 :
FIX THE OTHER END OF THE SIDERAIL (C) TO THE
FOOTBOARD (B).
FOLLOW THE ILLUSTRATION TO
SLATS (D) ON THE BED FRAME AND THE
BED SLATS (D) USING WOOD SCREWS (2). USE THE
PILOT HOLES ON THE SIDERAILS (C) AS YOUR
REFERENCE FOR EASY ASSEMBLY.
PLACE THREE BED
SECURE
SECURE BOTH SIDERAILS (C) TO THE HEADBOARD (A) AND FOOTBOARD (B)
USING ROUND HEAD SCREWS (1) AS SHOWN IN THE ILLUSTRATION.
FOLLOW THE ILLUSTRATION TO
TO BED SLATS (D) USING ALLEN BOLTS ( ). USE ALLEN KEY (3)
TO TIGHTEN THE BOLTS.
FIX THE LEG SUPPORT (E)
4
MAKE SURE ALL BOLTS AND SCREWS
ARE TIGHTENED BEFORE USING.
FIX THE OTHER SIDERAIL (C) TO THE HEADBOARD (A)
AND FOOTBOARD (B).
1
1
A
C
  • Page 1 1
  • Page 2 2

mFi CITY II RAKE LOW PROFILE BED Assembly Instructions

Brand
mFi
Model
CITY II RAKE LOW PROFILE BED
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents