2. American Standard
  3. 3472.128.020

American Standard 3472.128.020 Dimensions Guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 3472.128.020 Dimensions Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LW-17
© 2016 AS America Inc.
spec_3472.128 Mainstream FW RH rf Compl Rev. B 11/16
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPAR AT E LY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
16-1/2"
(419mm)
12-3/4"
(324mm)
7-1/8"
(180mm)
12"
(305mm)
9-3/8"
(238mm)
29-7/8"
(760mm)
18"
(456mm)
16-1/2"
(419mm)
8-1/2"
(217mm)
27-3/4"
(704mm)
FINISHED
WALL
FINISHED
FLOOR
1" ± 1/4"
(25mm ± 6mm)
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
3-1/4"
(83mm)
C/L OF OUTLET
5/8"
(16mm)
14"
(356mm)
SUPPLY
AS
REQ'D
10"
(254mm)
6"
(152mm)
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Supply with stop:
MAINSTREAM
®
FloWise
®
RIGHT HEIGHT
®
ROUND FRONT COMPLETE TOILET
VITREOUS CHINA
MAINSTREAM
®
FloWise
®
RIGHT HEIGHT
®
ROUND FRONT COMPLETE TOILET
❑ 3472.128
•Vitreouschina
•MeetsdenitionforHET(HighEfficiencyToilet)
•HighEfficiency(1.28gpf/4.8Lpf)
•MeetsEPAWaterSense
®
criteria
•16-1/2"rimheightforaccessibleapplications
•Roundfrontsiphonactionbowlwithdirect-fedjet
•Generous9"x8"watersurfacearea
•Fullyglazed2"Trapway
•Sanitarydamonbowlwiththreepoint
tankstabilization
•PilotValveWaterControl
•2"Flapperushvalve
•Chrometriplever
•2color-matchedboltcaps
•Includescolor-matchedsolidplasticseat
•Waxringgasketwithclosetbolts
•100%factoryushtested
•Lifetimewarrantyonchinaware,5year
warrantyonallmechanicalparts,and1year
warranty on seat
Nominal Dimensions:
704 x 456 x 760mm
(27-3/4" x 18" x 29-7/8")
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
China Fixtures
•USEPAWaterSense
®
Specication for HET's
Certified by
IAPMO R&T
BARRIER FREE
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
/