American Standard 3128.001.020, 2315228.020, 3128001.020, 4019228.020, 4019828.020 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard 3128.001.020 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
M65
© 2013 AS America Inc.
Revised 2/13
To Be Specied:
Color: White
Seat: #5001G.010 Baby Devoro Seat open front
with EverClean
®
less cover
Alternate Seat:
American Standard 5385.010 seat & cover
Supply with Stop:
BABY DEVORO
FloWise
®
10" HIGH
ROUND FRONT TOILET
VITREOUS CHINA
BABY DEVORO™ FloWise
®
10" HIGH
ROUND FRONT TOILET
2315.228
•Vitreouschina
•HighEfficiency,LowConsumption
(4.8Lpf/1.28gpf)
•MeetsdenitionofHET(HighEfficiencyToilet)
•10-1/4"rimheight
•10"roughing-in
•Roundfrontsiphonactionbowl
•Chrometriplever
•Sanitarydamonbowl
•Fullyglazedtrapway
•2color-matchedboltcaps
•100%factoryushtested
3128.001RoundFrontUniversalBowl
with bolt caps
4019.228Tankcompletewithcoupling
componentsandtanktrim(1.28gpf/4.8Lpf)
Nominal Dimensions:
633 x 439 x 622mm
(25"x17-1/4"x24-1/2")
Component parts:
5385.010 Seat and cover
Alternative Tank Congurations Available:
4019.613Tankwithlockingdevicecompletewith
couplingcomponentsandtanktrim
4019.828Tankcompletewithtripleveron
rightside
Fixtureonly,seatandsupplyarenotincludedand
must be purchased separately.
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
System MaP* Score:
500gramsofmiso@1.28gpf
* MaximumPerformance(MaP)testingperformedbyIAPMO
R&TLab.MaPReportconductedbyVeritecConsulting,
Inc.andKoellerandCompany.
NOTES:
THISCOMBINATIONISDESIGNEDTOROUGH-INATAMINIMUM
DIMENSIONOF254mm(10)FROMFINISHEDWALLTOC/LOFOUTLET
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
SUPPLYNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithin
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
55mm (2-1/8")
633mm
(25")
FINISHED WALL
C/L SEAT POST HOLES
140 mm (5-1/2") CENTERS
395mm
(15-1/2")
200mm
(7-7/8")
254mm
(10")
250mm
(9-7/8")
C/L OUTLET
13mm
(1/2")
347mm
(13-1/8")
225mm
(8-7/8")
C/L
260mm
(10-1/4")
159mm
(6-1/4")
152mm
(6")
622mm
(24-1/2")
FINISHED
FLOOR
SUPPLY
AS
REQ'D
*
191mm
(7-1/2
")
16mm ± 6mm
(5/8
" ± 1/4")
439mm
(17-1/4
")
/