2. Way Basics
  3. WB-DRECT-OE

Way Basics WB-DRECT-OE, WB-BLOX-5-EO, WB-BLOX-7-EO, WB-BLOX-7-WE, WB-DRECT-EO, WB-DRECT-WE Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Way Basics WB-DRECT-OE Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Watch and Assemble www.waybasics.com/help-divider-blox Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
1 2 3
4 5 6
Carefully remove the 3M
protective layer from adhesive.
Place alignment pins in middle
zBoard and vertical zBoards.
Align vertical zBoards to middle zBoard.
Align a horizontal zBoard. Align backer zBoard. Align horizontal board and flip right side up.
Visit links below for more details.
Enjoy building possibilities!
D
B
1 Backer Board
thin and has no adhesive
2 Horizontal zBoards
with grooves
1 Middle zBoard
adhesive strips on 2 edges
2 Vertical zBoards
adhesive strips on 2 edges
12 Alignment Pins
4 connectors pins
Included
DIVIDER BLOX
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
/