Way Basics BS-285-340-770-WE User manual

Brand
Way Basics
Model
BS-285-340-770-WE
Type
User manual
Watch and Assemble www.waybasics.com/help-double-cube-plus Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
1 2 3
4
5 6
Carefully remove the 3M
protective layer from adhesive.
Place alignment pins
in vertical zBoards.
Align vertical zBoards and
backer board to horizontal
zBoard.
Align middle zBoard.
Align vertical zBoards and
backer board to middle
zBoard.
Align horizontal zBoard. Visit
links below for more details.
Enjoy building possibilities!
2 Backer Boards
thin and has no adhesive
2 Horizontal zBoards
with grooves
4 Vertical zBoards
adhesive strips on 2 edges
16 Pins
1 Middle zBoard
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Included
DOUBLE CUBE PLUS
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
  • Page 1 1

Way Basics BS-285-340-770-WE User manual

Brand
Way Basics
Model
BS-285-340-770-WE
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents