Emerson 539031G12 Datasheet

AC Power

For Business-Critical Continuity™

Emerson Network Power Rack PDU Systems

Product Selection Guide - North American Models

i

TABLE OF CONTENTS

1.0 EMERSON NETWORK POWER RACK PDU SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

1.1 Safety and Agency Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2.0 DETERMINING THE RIGHT EMERSON PDU FOR YOUR APPLICATION . . . . . . . . . . . . . . . . . . .2

3.0 KNURR DI-STRIP PRODUCT SELECTION GUIDE - BASIC RACK PDUS. . . . . . . . . . . . . . . . .3

3.1 Overview - Basic Rack PDUs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.2 Basic Rack PDU Optional Cord Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.3 Dimensional Drawings - Basic Rack PDUs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.0 LIEBERT MPH PRODUCT SELECTION GUIDE - MANAGED RACK PDUS . . . . . . . . . . . . . . .27

4.1 Overview - Managed Rack PDUs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.2 Specifications - Liebert MPH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.3 Model Number Configuration - Liebert MPH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.4 Managed Rack PDU Optional Cord Sets and Cable Restraints . . . . . . . . . . . . . . . . . . . . . . 30

4.5 Dimensional Drawings - Managed Rack PDUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.0 LIEBERT MPX - ADAPTIVE RACK PDUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

5.1 Overview - Adaptive Rack PDUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.2 MPX PRC (Power Rail Chassis). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.3 MPX PEM (Power Entry Module) and MPX IPC (Input Power Cord) . . . . . . . . . . . . . . . . . 36

5.4 MPX BRM (Branch Receptacle Module) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.5 Adaptive Rack PDU Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.5.1 Cord Sets and Cable Restraints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.5.2 Liebert RPC

™

(RPC-1000) and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.5.3 Part Numbers for Liebert RPC and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.5.4 Ports on the Liebert RPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.5.5 Liebert RPC Capabilities and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.5.6 RPC BDM—Basic Display Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

5.5.7 Temperature/Humidity Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6.0 LIEBERT MPX SYSTEM PRODUCT SELECTION GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

6.1 STEP 1 - Select an MPX PRC (Quantity x 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.2 STEP 2 - Select an MPX PEM / MPX IPC (Quantity x 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

6.3 STEP 3 - Select an MPX BRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6.4 STEP 4 - Select Communication Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6.5 System Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

6.6 Specifications for Liebert MPX Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

6.7 Dimensional Drawings - Adaptive Rack PDUs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

ii

FIGURES

Figure 1 Knurr DI-STRIP 35351011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 2 Knurr DI-STRIP 35351021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Figure 3 Knurr DI-STRIP 35351031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Figure 4 Knurr DI-STRIP 35351041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 5 Knurr DI-STRIP 35351051 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 6 Knurr DI-STRIP 35351061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Figure 7 Knurr DI-STRIP 35351081 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 8 Knurr DI-STRIP 35352011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 9 Knurr DI-STRIP 35352021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 10 Knurr DI-STRIP 35352031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Figure 11 Knurr DI-STRIP 35352041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Figure 12 Knurr DI-STRIP 35352051 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Figure 13 Knurr DI-STRIP 35352061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Figure 14 Knurr DI-STRIP 35352078 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 15 Knurr DI-STRIP 35353011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 16 Knurr DI-STRIP 35353021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Figure 17 Knurr DI-STRIP 35353031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 18 Knurr DI-STRIP 35353041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 19 Knurr DI-STRIP 35353051 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Figure 20 Knurr DI-STRIP 35353061 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Figure 21 Knurr DI-STRIP 35353078 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Figure 22 Knurr DI-STRIP 35353088 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Figure 23 Liebert MPH rack mount power strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 24 Liebert MPH vertical power strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Figure 25 Liebert MPX 1880 and 1035 models and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Figure 26 MPX PRC (Power Rail Chassis) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Figure 27 Liebert RPC ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Figure 28 RPC BDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Figure 29 Temperature/humidity sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Figure 30 Liebert MPX MPXPRC-1035mm mixed modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Figure 31 Liebert MPX MPXPRC-1880mm mixed modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

TABLES

Table 1 Specifications - Knurr DI-STRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Table 2 Cord sets - Knurr DI-STRIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Table 3 Specifications - Liebert MPH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Table 4 Cord sets and cable restraints - Liebert MPH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Table 5 Selections for Power Entry Module MPXPEM-NVAXXAXX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Table 6 Selections for Power Entry Module MPXPEM-NHBXXV30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table 7 Selections for Power Entry Module MPXPEM-NHBXXX30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Table 8 Selections for Power Entry Module MPXPEM-NHBXXW30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Table 9 Specifications - MPX BRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Emerson Network Power Rack PDU Systems

1

1.0 EMERSON NETWORK POWER RACK PDU SYSTEMS

Emerson Network Power’s Rack PDU Systems is a family of products that delivers power and man-

agement to connected IT equipment through a global and comprehensive offering including Basic,

Managed and Adaptive Rack PDU systems.

Each PDU type offers simplified installation and easy operation. Each type is compatible with

standard rack enclosures. These Emerson Rack PDUs provide easy low-cost installation, simple

relocation, security and proven design and performance.

Emerson Rack PDUs can be set up with varying degrees of power-monitoring and management.

When power or management requirements grow, the adaptive PDUs are scalable, enabling them to

grow with the installation.

Emerson PDUs are available for the entire spectrum of power needs of every type of rack equipment.

• Knurr

®

DI-STRIP

-

Basic Rack PDU systems, provide a broad range of power distribution capac-

ities and connectivity solutions in a robust package.

• Liebert MPH

™ -

Managed Rack PDUs with single-phase or three-phase capability for fixed power

input/output with remote management support; one-piece unit with monitoring at the branch

level and control at the receptacle level; available in rack-mount and zero U configurations.

• Liebert MPX

™ -

Adaptive Rack PDUs built with modular and scalable components that can be

installed and reconfigured on-site to meet changing input and output power connectivity needs;

with remote monitoring at the branch level and receptacle management and control at the recep-

tacle level.

1.1 Safety and Agency Compliance

Where a conflict arises between the following documents and statements made herein, the statements

in this specification will govern.

North American Units - 120V and 208V (Single-Phase and Three-Phase)

• UL 60950-1 Information Technology Equipment

• CAN/CSA-C22.2 No. 60950-1-03 Information Technology Equipment

• FCC, Title 47, Part 15 Subpart B for Class A operation as defined by ANSI Standard C63.4

• ISTA Procedure 1A and 2A

• RoHS Compliant

Determining the Right Emerson PDU for Your Application

2

2.0 DETERMINING THE RIGHT EMERSON PDU FOR YOUR APPLICATION

Each of the Rack PDU systems Emerson offers is well-suited for delivering power to sensitive, high-

capacity, rack-mounted equipment. Determining which is best for a particular installation requires

knowing the basic power requirements of the equipment in the rack, deciding on the acceptable or

preferable level of monitoring and control and then balancing those considerations against site

requirements.

The Emerson Rack PDU product line includes models to fit all types of installations: new or estab-

lished; stable or rapidly changing; contracting or expanding. Each type of installation may require

any or all types of Emerson Rack PDUs.

After determining your requirements, refer to the data and specifications for each product.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

3

3.0 KNURR DI-STRIP PRODUCT SELECTION GUIDE - BASIC RACK PDUS

3.1 Overview - Basic Rack PDUs

The Knurr DI-STRIP, a Basic Rack PDU system, provides a broad range of power distribution capaci-

ties and connectivity solutions in a robust package.

The Knurr DI-STRIP includes an input power cord with appropriate input plug connection and

hydraulic-magnetic branch rated overload protection as appropriate; basic rack mounting provisions

are also provided. Knurr DI-STRIP Rack PDUs are available in rack mount and vertical zero-U form

factors.

The Knurr DI-STRIP fits most standard 600mm width network equipment rack enclosures. Product

fit should be confirmed for each application.

Table 1 Specifications - Knurr DI-STRIP

Part

Number

INPUT OUTPUT

Form

FactorVoltage

Rated

Amps

Max

Continuous

Amps kW* Phase Plug

Receptacle/Socket

Configuration

035351011 120 15 12 1.4 1 NEMA 5-15P (9) NEMA 5-15R

Rack mount

or Vertical

035351021 120 15 12 1.4 1 NEMA 5-15P (12) NEMA 5-15R Vertical

035351031 120 15 12 1.4 1 NEMA 5-15P (18) NEMA 5-15R Vertical

035351041 120 20 16 1.9 1 NEMA L5-20P (9) NEMA 5-20 T-Slot Vertical

035351051 120 20 16 1.9 1 NEMA 5-20P (12) NEMA 5-20 T-Slot Vertical

035351061 120 20 16 1.9 1 NEMA L5-20P (12) NEMA 5-20 T-Slot Vertical

035351081 120 30 24 2.8 1 NEMA L5-30P (24) NEMA 5-20 T-Slot Vertical

035352011 208-240 20 16 3.3 1 NEMA L6-20P (9) IEC-C13 sockets Vertical

035352021** 208-240 20 16 3.3 1 IEC-C20 inlet (9) IEC-C13 sockets

Rack mount

or Vertical

035352031 208-240 20 16 3.3 1 NEMA L6-20P (12) IEC-C13 sockets Vertical

035352041** 208-240 20 16 3.3 1 IEC-C20 inlet (12) IEC-C13 sockets Vertical

035352051 208-240 30 24 4.9 1 NEMA L6-30P (4) IEC-C19 sockets Vertical

035352061 208-240 30 24 4.9 1 NEMA L6-30P (24) IEC-C13 sockets Vertical

035352078 208-240 30 24 4.9 1 NEMA L6-30P

(20) IEC-C13 +

(4) IEC-C19 sockets

Vertical

035353021 120/208 20 16 5.7 3 NEMA L21-20P

(18) IEC-C13 +

(6) IEC-C19 sockets

Vertical

035353031 120/208 20 16 5.7 3 NEMA L21-20P

(27) IEC-C13 +

(6) IEC-C19 sockets

Vertical

035353041 120/208 20 16 5.7 3 NEMA L21-20P (27) 5-20 T-Slot Vertical

035353011 120/208 30 24 8.6 3 NEMA L21-30P (6) IEC-C19 sockets Vertical

035353051 120/208 30 24 8.6 3 NEMA L21-30P

(18) IEC-C13 +

(6) IEC-C19 sockets

Vertical

035353061 120/208 30 24 8.6 3 NEMA L21-30P

(27) IEC-C13 +

(6) IEC-C19 sockets

Vertical

035353078 208-240 60 48 17.3 3

IEC60309

(3 pole, 4 wire,

250VAC, blue)

(42) IEC-C13 +

(6) IEC-C19 sockets

Vertical

035353088 208-240 42 34 24.4 3

(2) IEC60309

(3 pole, 4 wire,

250VAC, blue)

(42) IEC-C13 +

(6) IEC-C19 sockets

Vertical

All input cords are 10 ft. (3m) in length.

* Formulas used to calculate the kW:

For single-phase: input voltage x max continuous amps = watts

For three-phase: input voltage x max continuous amps x 1.73 = watts

** Knurr DI-STRIP output expansion modules require the use of a cord set for input power.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

4

3.2 Basic Rack PDU Optional Cord Sets

Output Cord Sets

Output cord sets are available to support conversion of Rack PDU power output receptacles to alter-

native power output connections and to support Rack PDU output expansion capabilities.

Conversion of power output connections can be provided on Rack PDUs with IEC-C19 receptacles.

The output cord set for these systems includes an IEC-C20 plug to connect to the IEC-C19 receptacle,

a 3 ft. (1m) power cord and receptacle to connect to user equipment. Available receptacles include:

IEC-C13 to connect to IEC-C14 equipment plugs and IEC-C19 to connect to NEMA L6-20P equipment

plugs.

Knurr DI-STRIP output expansion modules are powered via an IEC-C20 input connection. These

systems provide output expansion capabilities when connected to a receptacle on a separate Rack

PDU. The output cord set for these systems includes an IEC-C19 receptacle to connect to the IEC-C20

plug on the output expansion Knurr DI-STRIP, a 3 ft. (1m) power cord and plug to connect to the

Rack PDU receptacle providing power. Available plugs include: IEC-C20 to connect to an IEC-C19

Rack PDU receptacle.

Input Cord Sets

Input cord sets are available to support conversion of Rack PDU power input connections to

alternative power input connections. Conversion of power input can be provided on Rack PDUs with

L5-20P plug connections. The input cord set includes an L5-20R receptacle to connect to the L5-20P

Rack PDU plug, a 1 ft. (0.3m) power cord and a 5-20P plug.

Table 2 Cord sets - Knurr DI-STRIP

Cord Sets

Output Cord Sets - Power Output Conversion

539031G5 Output Cord Set - Power Output Conversion - IEC-C20 to IEC-C13, 3 ft. (1m)

539031G6 Output Cord Set - Power Output Conversion - IEC-C20 to IEC-C13, 10 ft. (3m)

539031G9 Output Cord Set - Power Output Conversion - IEC-C20 to NEMA L6-20R, 3 ft. (1m)

539031G10 Output Cord Set - Power Output Conversion - IEC-C20 to NEMA L6-20R, 10 ft. (3m)

Output Cord Sets - Power Output Expansion

539031G7 Output Cord Set - Power Output Expansion - IEC-C20 to IEC-C19, 3 ft. (1m)

539031G8 Output Cord Set - Power Output Expansion - IEC-C20 to IEC-C19, 10 ft. (3m)

539031G3 Output Cord Set - Power Output Expansion - IEC-C14 to IEC-C19, 3 ft. (1m)

539031G4 Output Cord Set - Power Output Expansion - IEC-C14 to IEC-C19, 10 ft. (3m)

Input Cord Sets - Power Input Conversion

539031G12 Input Cord Set - Power Input Conversion - L5-20R to 5-20P, 1 ft. (0.3m)

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

5

3.3 Dimensional Drawings - Basic Rack PDUs

Figure 1 Knurr DI-STRIP 35351011

03.535.101.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

12.2" (311mm)

2.9"

(73mm)

2.5"

(63mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

35351011

Rev. 3

Input

Cord

Input

Plug Phase

Rated

Amps

Voltage

(VAC)

5-15P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

5-15P 120 15112

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

OUTPUT POWER

1 5-15R (9) 120 12112

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 2.5 lb. (1.1kg)

3. Shipping dimensions:

18.9" (480mm) L x 2.8" (71mm) W x 3.3" (84mm) D

4. Shipping weight: 2.8 lb. (1.3kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

17.6" (447mm)

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

6

Figure 2 Knurr DI-STRIP 35351021

03.535.102.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

19.6" (497mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

12.2" (311mm)

4.8"

(123mm)

2.5"

(63mm)

35351021

Rev. 3

Input

Cord Phase

Rated

Amps

5-15P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

5-15P 120 15112

OUTPUT POWER

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1 5-15R (9) 120 12112

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 2.7 lb. (1.2kg)

3. Shipping dimensions:

22.2" (565mm) L x 2.8" (70mm) W x 3.3" (85mm) D

4. Shipping weight: 3.1 lb. (1.4kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Input

Plug

Voltage

(VAC)

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

7

Figure 3 Knurr DI-STRIP 35351031

03.535.103.1

00/00 000000

www.knuerr .com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

27.4" (697mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

5-15P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

5-15P 120 15112

OUTPUT POWER

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1 5-15R (18) 120 12112

35351031

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

27.4" (697mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 3.3 lb. (1.5kg)

3. Shipping dimensions:

42" (1065mm) L x 2.4" (60mm) W x 3" (75mm) D

4. Shipping weight: 3.8 lb. (1.72kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Input

Plug

Voltage

(VAC)

12.2" (311mm)12.7" (323mm)

2.5"

(63mm)

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

8

Figure 4 Knurr DI-STRIP 35351041

03.535.104.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

17.6" (447mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

L5-20P

(2 pole, 3 wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

L5-20P 120 20116

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

OUTPUT POWER

1 5-20R (9) 120 16116

35351041

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 3 lb. (1.35kg)

3. Shipping dimensions:

26.8" (680mm) L x 2.4" (60mm) W x 3.9" (100mm) D

4. Shipping weight: 3.4 lb. (1.54kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Input

Plug

Voltage

(VAC)

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

9

Figure 5 Knurr DI-STRIP 35351051

03.535.105.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

19.6" (497mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

5-20P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

5-20P 120 20116

OUTPUT POWER

12.2" (311mm)

4.8"

(123mm)

2.5"

(63mm)

Input

Plug

Voltage

(VAC)

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1 5-20R (9) 120 16116

35351051

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 3.5 lb. (1.57kg)

3. Shipping dimensions:

26.8" (680mm) L x 2.4" (60mm) W x 3.9" (100mm) D

4. Shipping weight: 3.9 lb. (1.76kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

10

Figure 6 Knurr DI-STRIP 35351061

03.535.106.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

19.6" (497mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

L5-20P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

L5-20P 120 20116

OUTPUT POWER

12.2" (311mm)

4.8"

(123mm)

2.5"

(63mm)

Input

Plug

Voltage

(VAC)

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1 5-20R (12) 120 16116

35351061

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 3.2 lb. (1.47kg)

3. Shipping dimensions:

24.6" (625mm) L x 2.4" (60mm) W x 3.9" (100mm) D

4. Shipping weight: 3.5 lb. (1.6kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

11

Figure 7 Knurr DI-STRIP 35351081

03.535.108.1

00/00 000000

www.knuerr. com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STR IP

24.5" (622mm)16.6" (422mm)

2.1"

(53mm)

Branch

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BranchVoltage (VAC)

Max. Cont. Amps

1 5-20R (12) 120 16120

2 5-20R (12) 120 16120

35351081

Rev. 4

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

43.2" (447mm) L x 1.7" (44mm) W x 3.3" (85mm) D

2. Unit weight: 7.51 lb. (3.4kg)

3. Shipping dimensions:

44.9" (1140mm) L x 2.8" (70mm) W x 6.3" (160mm) D

4. Shipping weight: 8.4 lb. (3.8kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

43.2" (1097mm)

FRONT VIEW

20A branch circuit breakers

Branch 2Branch 1

20A branch

circuit breakers

REAR VIEW

SIDE VIEW

1.7"

(44mm)

1.8"

(46mm)

3.3"

(85mm)

Input

Cord Phase

Rated

Amps

L5-30P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

L5-30P 120 30124

OUTPUT POWER

Input

Plug

Voltage

(VAC)

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

12

Figure 8 Knurr DI-STRIP 35352011

03.535.201.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

17.6" (447mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

L6-20P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

L6-20P 208-240 20116

OUTPUT POWER

Input

Plug

Voltage

(VAC)

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1 IEC-C13 (9) 208-240 12116

35352011

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 3.2 lb. (1.4kg)

3. Shipping dimensions:

24.6" (625mm) L x 2.4" (60mm) W x 3.9" (100mm) D

4. Shipping weight: 3.4 lb. (1.5kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

13

Figure 9 Knurr DI-STRIP 35352021

03.535.202.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BAS IC

DI STRIP

17.6" (447mm)

2.5" (63mm) 12.2" (311mm) 2.9" (73mm)

IEC-C20 inlet

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Input Phase

Rated

Amps

Voltage

(VAC)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

208-240 20116

OUTPUT POWER

* Requires a cordset

IEC-C20

Inlet *

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1 IEC-C13 (9) 208-240 12116

35352021

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

17.6" (447mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 1.5 lb. (0.7kg)

3. Shipping dimensions:

19" (483mm) L x 3" (75mm) W x 2.4" (60mm) D

4. Shipping weight: 1.7 lb. (0.8kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

14

Figure 10 Knurr DI-STRIP 35352031

03.535.203.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

19.6" (497mm)

2.5" (63mm)12.2" (311mm)4.8" (123mm)

FRONT VIEW

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

L6-20P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

L6-20P 208-240 20116

OUTPUT POWER

Input

Plug

Voltage

(VAC)

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1

IEC-C13 (12)

208-240 12116

35352031

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 3.4 lb. (1.5kg)

3. Shipping dimensions:

26.8" (680mm) L x 2.4" (60mm) W x 3.9" (100mm) D

4. Shipping weight: 3.7 lb. (1.68kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

15

Figure 11 Knurr DI-STRIP 35352041

03.535.204.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

Input

Plug

Voltage

(VAC)

Bank

Receptacle

Type (Qty)

Receptacle Type

Phase Per Receptacle Per BankVoltage (VAC)

Max. Cont. Amps

1

IEC-C13 (12)

208-240 12116

35352041

Rev. 3

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit dimensions:

19.6" (497mm) L x 1.7" (44mm) W x 2" (50mm) D

2. Unit weight: 1.8 lb. (0.8kg)

3. Shipping dimensions:

22.6" (575mm) L x 2.4" (60mm) W x 3" (75mm) D

4. Shipping weight: 2.1 lb. (0.9kg)

5. All wiring is to be in compliance with national

and local electric codes.

6. Mounting provisions provided.

19.6" (497mm)

12.2" (311mm) 2.5" (63mm)4.8" (123mm)

FRONT VIEW

IEC-C20 INLET

REAR VIEW

SIDE VIEW

1.7"

(44mm)

2"

(50mm)

Input

Cord Phase

Rated

Amps

Max. Cont.

Amps

INPUT POWER

10 ft.

(3m)

IEC-C20

inlet *

208-240 20116

OUTPUT POWER

* Requires a cordset

Knurr DI-STRIP Product Selection Guide - Basic Rack PDUs

16

Figure 12 Knurr DI-STRIP 35352051

03.535.205.1

00/00 000000

www.knuerr.com

120 VAC, 60Hz

Input: max. 15A

Outlets: max. 15A

NA BASIC

DI STRIP

17.6" (447mm)

FRONT VIEW

20A branch circuit breaker

Branch 2

Branch 1

20A branch

circuit breaker

REAR VIEW

SIDE VIEW

1.7"

(44mm)

1.8"

(46mm)

3.3"

(85mm)

35352051

Rev. 3

Input

Cord

Input

Plug

Phase

Rated

AmpsVoltage

Voltage (VAC)

L6-30P

(2-pole, 3-wire)

Max. Cont.

Amps

INPUT POWER

10 ft. (3m)

L6-30P 208-240 30124

Receptacle Type

(Quantity)

Per Receptacle Type

Per Receptacle

Per Branch

Phase

Branch

Max. Continuous Amps

OUTPUT POWER

IEC-C19 (2)

208-240

1

2

16

20

AGENCY:

CSA tested to UL 60950-1

RoHS compliant (reduction of hazardous substances)

ENVIRONMENTAL:

Operating: 32°F to 131°F (0°C to 55°C), 5% - 95% RH

non-condensing, non-corrosive

Storage Temperature: -4°F to 140°F (-20°C to 60°C)

NOTES:

1. Unit Dimensions: 17.6" (447mm) L x 1.7" (44mm) W x 2.0" (50mm) D

2. Unit Weight: 4.8lb. (2.2kg)

3. Shipping Dimensions: 29.0" (740mm) L x 6.3" (160mm) W x 2.7" (70mm) D

4. Shipping Weight: 5.5lbs (2.5kg)

5. All wiring is to be in compliance with national and local

electric codes.

6. Mounting provisions provided.

IEC-C19 (2)

Page is loading ...

Emerson 539031G12 Datasheet

This manual is also suitable for

Emerson 539031G12 Datasheet

Related papers

Other documents